Rezkarji za papir in karton nakup rabljenega (82)

Leto izdelave: 1988, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or pending maintenance. The electronics have not been modified or refitted; everything remains original. Complete documentation is available. We have both digital and analog circuit diagrams as well as exploded views. All frames and pins required for using all machine functions are included, specifically for the blanking section, nick breaker, and lower blanking station with pins. A quick-lock system is installed, for example, so the blanking unit does not require additional fastening. Hfodpfx Aewk I Iqob Ejd Additional photos or videos can be provided upon request. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8,000 sheets/h Max. cutting force: 250 t Minimum paper weight: 80 g/m² Maximum carton thickness: 2,000 g/m² Non-stop feeder Non-stop delivery Side lay Quick-lock system We can assist with dismantling, installation, and transport. Special feature: The machine has been raised by approximately 100 mm, eliminating the need for a pit at the production site! The height extension can be removed without tools and is not permanently fixed to the machine. Please feel free to contact us with any further questions. Best regards

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 552410, Leto izdelave: 1974, Proizvajalec: Bobst, Švica Model: Autoplatine SP 1420 E – 600 T Tip: Stroj za izsekovanje / autoplatina Leto izdelave: 1974 Št. stroja: 552410 Tehnični podatki: - Največji format pola: 1420 x 1020 mm - Najmanjši format pola: 700 x 500 mm - Hitrost: do 4.500 pol/uro - Električni priključek: 380 V, 50 Hz Posebnosti: - Robustna konstrukcija za karton in valovito lepenko - Avtomatska izsekovalna plošča - Nalagalnik in izlagalnik skladov - Mehanski nadzor z upravljalno konzolo - Dokazana švicarska kakovost Hfedpjw Rb Ezjfx Ab Ejd

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 057400108, Proizvajalec: Bobst, Švica Model: SP 142 Tip stroja / Kategorija: Stroj za izsekavanje / Die Cutting Machine Tip stroja: Avtoplatina / Autoplaten Letnik: --- (ni navedeno) Št. stroja: 057400108 Tehnični podatki: - Maks. format pol: 1420 x 1020 mm - Min. format pol: 700 x 500 mm - Hitrost: do 4.500 pol/uro (odvisno od serije) - Priključna napetost: 380 V, 50 Hz Posebnosti: - Robustna švicarska konstrukcija Hfsdpfx Aew Rb Ebjb Ejd - Mehanski nadzor s stransko upravljalno ploščo - Nakladalnik in izlagalnik za neprekinjeno delovanje - Primerno za karton in valovito lepenko - Preizkušen model za proizvodnjo embalaže

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 858799A, Proizvajalec: Ruiyang Printing Machinery Co., Ltd., Kitajska Model: MH-1650 Vrsta stroja: Stroj za izsekovanje in žlebljenje Tip stroja: Avtomatski velikofornatni izsekovalnik Leto izdelave: 2014 Serijska številka: 858799A Tehnični podatki: - Maks. format polja: 1650 x 1210 mm - Min. format polja: 650 x 550 mm - Maks. velikost izseka: 1620 x 1190 mm - Hitrost: do 3.200 pol/h - Priklop: 380 V, 50 Hz, 3 faze Posebnosti: - Avtomatski podajalnik s sesalno glavo - Staper za velikofornatne izhode - Robusna konstrukcija za karton in valovito lepenko Hfsdpfew Rb Ipox Ab Ejd - Upravljalna plošča z nadzornimi in varnostnimi funkcijami - Primerno za proizvodnjo velikih embalaž

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 52.000 kg, prebijalna sila: 600 t, potrebna višina: 3.520 mm, zahteva za prostor dolžina: 12.150 mm, potrebna širina: 9.340 mm, Machine for Die-Cutting, Embossing, Waste Stripping and Blank Separation Used machine, factory-refurbished by QTM Schwalmtal System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ For internal waste stripping as well as stripping of side and rear sheet edges ⦁ For stack-wise delivery of die-cut and stripped sheets with remaining gripper edges, or ⦁ For separation of gripper edges and subsequent stack-wise delivery of the residual sheets ⦁ With patented gripper carriage register system for highest registration accuracy ⦁ With bundle stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, even for smallest cut sizes without requiring changeover (exchange table with comb structure) ⦁ Separator sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device in the delivery section ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Max. sheet size: 1060 x 1450 mm Min. sheet size: 500 x 700 mm Max. die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Hedpfx Ajt E Ntheb Eofd Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery section Including platform Control system upgraded to Siemens S7 Completely overhauled machine drive Quick-action clamping frames in all tooling stations

Leto izdelave: 2008, obratovalne ure: 55.000 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Heidelberg Dymatrix CSB Leto izdelave: 2008 Velikost: 760 x 1060 cm Naprava za rezanje, žlebljenje, odstranjevanje izrezkov in izsekovanje Hfjdpeyf E Icofx Ab Eod Impresija: 290 milijonov Vzdrževanje: vsi PM in OEM servisi so bili opravljeni Rezervni deli: nekateri na voljo Stanje: zelo dobro, v produkciji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - Hjdpfx Abeww E Nrj Ejfd System equipped with a high-performance sheet feeder designed for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and trailing edges of the sheets ⦁ for stacking the die-cut and stripped sheets with the attached gripper edges, or ⦁ for separating gripper edges and subsequently stacking the remaining blanks ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a pile stacking device enabling fully automatic separator sheet insertion and NON-STOP delivery, with no changeover required even for the smallest cut formats (exchange table with comb structure) ⦁ separator sheet magazine with automatic level control, refillable during operation ⦁ equipped with Centerline system ⦁ with automatic pallet changer at the delivery section Specifications Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Materials processable: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4%) Equipment: Optical sheet alignment (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at the delivery section including platform quick-lock frames in all tooling stations