Stroj za izsekovanje

Ruiyang MH-1650

Leto izdelave: 2025, Stanje: novo, Specification: Max. sheet size: 740 x 1,060 mm Min. sheet size: 330 x 400 mm Maximum die-cutting force: 3.0 MN Speed: 9,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Blodpfxolyp Emo Afqor Equipment: Non-stop feeder Manual non-stop device at the feeder Blanking station Automatic non-stop roll apron Centerline Including platform 1 tool set Machine delivery time: 6-8 months after order

Leto izdelave: 2013, Stanje: dober (rabljeno), • Maximales Bogenformat: 1.060 x 760 mm • Minimales Bogenformat: 400 x 350 mm • Maximales Stanzformat: 1.060 x 745 mm • Greiferabstand: 10 mm • Maximale mechanische Geschwindigkeit: 7.700 Bogen/Stunde • Materialbereich: o Karton: 90–2.000 g/m² Bedpfx Afew E Iumjqelr o Wellpappe: bis zu 4 mm (abhängig von der Wellenart) • Stanzkraft: 260 Tonnen • Stapelhöhe (Anleger/Auslage): o Anleger: bis zu 1.350 mm o Auslage: bis zu 1.150 mm • Anlegertyp: Non-Stop • Auslagetyp: Non-Stop • Bogenausrichtung: Optisch und mechanisch • Stanzplattengröße: 1.080 x 760 mm

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Bljdpfx Afjh Nyfyjqor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 27 h, SBL 1060 SE Leto: 2016 Podajanje papirja: Ročni nonstop dvižni podajalnik Območje materiala: Papir in karton od 470 × 350 mm do 1060 × 760 mm Maks. format rezanja: 1050 × 740 mm Min. velikost pola: 470 × 350 mm Maks. velikost pola: 1060 × 760 mm Maks. pritisk rezanja: 300 ton Debelina materiala: 0,1 – 2 mm (valoviti/kaširani max 4 mm) Min. prijemni rob: 9,5 mm Maks. notranja velikost okvirja: 1155 × 852 mm Velikost rezalne plošče: 1076 × 756 mm Maks. hitrost: 8.000 pol/uro Poraba energije: Skupaj 32 kW (22 kW + 10 kW ogrevanje spodnje plošče) Dimenzije stroja (D׊×V): 5.900 × 5.700 × 2.615 mm Maks. višina skladovnice – podajalnik (s paleto): 1.750 mm Maks. višina skladovnice – dostava (s paleto): 1.450 mm Podajni del - Pnevmatska podajalna miza - Non-stop ročni podajalni sistem - Antistatični sistem - Predpriprava skladovnice - Ročna nastavitev sesalne skupine - Mikrometrična nastavitev sesanja - Motorizirano bočno nastavljanje skladovnice - Podajalna miza s sesalnim trakom - Visokotlačna mazalna črpalka - 2 pnevmatska bočna vodila za registro - Elektronsko upravljanje sprednjega in bočnega registra Rezalni/klekljalni del - Samodejna nastavitev pritiska do 300 ton - Pripravljalna in vstavna miza za orodne okvirje v preši - 2 hitrozapiralna orodna okvirja z osnovno ploščo Blodpfswypp Iox Afqsr - Pnevmatsko zaklepanje okvirja in spodnje podporne plošče - Centerline sistem - Mikrometrični sistem - Ogrevana spodnja podporna plošča (24 mm) - Rezalna plošča: 4 mm - Kompenzacijska plošča: 3 mm - Za arhiviranje primerna 1 mm tanka rezalna plošča Izločilni del - Hitrozapiralni sistem za zgornji in srednji izločilni okvir - 2 standardna zgornja izločilna okvirja - 2 standardna spodnja izločilna okvirja - Dvojni komplet dodatkov za pripravo spodnjega izločanja (zatiči, palice, vpenjala itd.) Prevzemni del - Avtomatska visokoskladovnična non-stop dostava s transporterjem - Giljotina za samodejno odstranjevanje odpadka prijemnega roba - Naprava za upočasnitev izhoda pol - Naprava za vstavljanje označevalnih lističev

Stanje: pripravljen za uporabo (rabljen), Popolnoma avtomatski ploskovni izsekovalni stroj, Neprekinjeno podajanje, Avtomatska vakuumska plošča, Postaja za čiščenje dvojnih pol, Obračalni okvir za izsekavanje, (Neprekinjen izhod - paketna dostava) s transportnim trakom, Izsekovalna sila 300 TON, Hitrost do 4.500 kos/h, omogoča delo z valovitim kartonom debeline max. 9 mm, min. 0,9 mm, Format: max. 1055x1575 mm, min. 400x600 mm, Blsdpfxowly D He Afqer Standardna oprema Bobst SPO 1575 EG 1980, popolnoma obnovljen leta 2015, veriga zamenjana 2024.

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Machine type: Embossing and Die-Cutting System / Automatic Platen Die Cutter Machine number: 400018 Year of manufacture: 2004 Machine Data Max. cycles per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Max. width: approx. 2,400 mm Max. height: approx. 3,200 mm Max. height with window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Feeder weight W4: approx. 3,000 kg Internal chase frame size: 820 x 1,134 mm Max. die-cut form size: 816 x 1,130 mm Largest cutting area: 800 x 1,120 mm with gripper margin Adjustable gripper margin: Standard 11–17 mm (13 mm wood before 1st knife), Optional 8–14 mm (10 mm wood before 1st knife) Cutting rule height: 23.8 mm Max. feeder pile height incl. pallet: 2,000 mm Max. delivery pile height incl. pallet: 1,700 mm Feeder pile weight: max. 1,000 kg Blodsv T T N Hjpfx Afqjr Delivery pile weight: max. 1,000 kg Feeder rest pile height: max. 450 mm Feeder rest pile weight: max. 450 kg Auxiliary delivery pile height: max. 200 mm Auxiliary delivery pile weight: 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Max. pallet height: 170 mm Drive and Power Supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, there is a pneumatic clutch with a spring-loaded brake, allowing the machine to be engaged and disengaged. The motor remains constantly powered. The control cabinet, positioned at the machine, contains (with few exceptions) all switching devices for the die-cutter and feeder. Command and indicator devices are located on the machine and are distributed as necessary across the control panels. Control Cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Connections: 3-phase AC 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in very good condition. A test run is possible at any time. Various accessories included. Patented QTM chain guide rails have already been retrofitted. Price: Negotiable

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Univerzalni neprekinjeni podajalnik Vzporedna priprava skladovnic 4 sprednje ležeče vodila Poteg vodilo na strani upravljavca (OS) 16 neodvisnih ogrevalnih con Satasta plošča Stranska vodila za folijo Bsdpfx Afovyn Ttoqslr Motorizirana napetost folije, zračno hlajenje Format: 102x72 cm Minimalni format: 40x35 cm Hitrost vročega tiska: največ 5.000 kosov/uro Hitrost izsekovanja: največ 7.500 kosov/uro

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 52.000 kg, prebijalna sila: 600 t, potrebna višina: 3.520 mm, zahteva za prostor dolžina: 12.150 mm, potrebna širina: 9.340 mm, Machine for Die-Cutting, Embossing, Waste Stripping and Blank Separation Used machine, factory-refurbished by QTM Schwalmtal System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ For internal waste stripping as well as stripping of side and rear sheet edges ⦁ For stack-wise delivery of die-cut and stripped sheets with remaining gripper edges, or ⦁ For separation of gripper edges and subsequent stack-wise delivery of the residual sheets ⦁ With patented gripper carriage register system for highest registration accuracy ⦁ With bundle stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, even for smallest cut sizes without requiring changeover (exchange table with comb structure) ⦁ Separator sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device in the delivery section ⦁ Modem ⦁ Standard machine height extension 600 mm Specification Max. sheet size: 1060 x 1450 mm Min. sheet size: 500 x 700 mm Max. die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery section Including platform Control system upgraded to Siemens S7 Blsdpfx Aot E Nthjfqer Completely overhauled machine drive Quick-action clamping frames in all tooling stations

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bjdpfx Aev Ifpusfqjlr Bobst Transfer Unit BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section - Waste removal section - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder designed for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and trailing edges of the sheets ⦁ for stacking the die-cut and stripped sheets with the attached gripper edges, or ⦁ for separating gripper edges and subsequently stacking the remaining blanks ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a pile stacking device enabling fully automatic separator sheet insertion and NON-STOP delivery, with no changeover required even for the smallest cut formats (exchange table with comb structure) ⦁ separator sheet magazine with automatic level control, refillable during operation ⦁ equipped with Centerline system Blodpfx Aeww E Nrefqjr ⦁ with automatic pallet changer at the delivery section Specifications Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Materials processable: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4%) Equipment: Optical sheet alignment (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at the delivery section including platform quick-lock frames in all tooling stations