Dymatrix 106 CSB

Heidelberg Dymatrix

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 330 t, Machine for Die-Cutting, Embossing, Waste Stripping, and Blank Separation - as is - System equipped with a high-performance sheet feeder designed for fully automatic NON-STOP operation ⦁ for fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ for stripping internal waste as well as side and trailing edges of the sheets ⦁ for stacking the die-cut and stripped sheets with the attached gripper edges, or ⦁ for separating gripper edges and subsequently stacking the remaining blanks ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a pile stacking device enabling fully automatic separator sheet insertion and NON-STOP delivery, with no changeover required even for the smallest cut formats (exchange table with comb structure) ⦁ separator sheet magazine with automatic level control, refillable during operation ⦁ equipped with Centerline system ⦁ with automatic pallet changer at the delivery section Specifications Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Hjdpfxeww E Nrj Abhsh Maximum die-cutting force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Materials processable: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4%) Equipment: Optical sheet alignment (Dyset) automatic non-stop feeder stripping station blank separation station Centerline fully automatic pallet changer at the delivery section including platform quick-lock frames in all tooling stations

Stanje: rabljeno, Leto izdelave: 1988, Bobst Flexo 1604 Printing Press, 4 bottom printing units, anilox cylinders 120 l/cm and 80 l/cm Bobst Transfer Unit BOBST SPO 1600 FLATBED DIE-CUTTER, maximum format 1100 mm x 1600 mm / 43.3" x 63", with 4 printing units plus bottom printing, conventional roller feeder - Anilox cylinders: 120 l/cm and 80 l/cm - Open steel chambered doctor blade - Vacuum feeder - Die-cutting section Hsdpfsv Ifpusx Abhoh - Waste removal section - Centerline II - High-pile delivery with two elevating tables - Maximum sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Minimum sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Die-cutting force: 400 t - Materials: E, B, C, CB, BE flutes - Maximum speed: 6,000 sheets/hour Machines can be sold separately.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 52.000 kg, prebijalna sila: 600 t, potrebna višina: 3.520 mm, zahteva za prostor dolžina: 12.150 mm, potrebna širina: 9.340 mm, Machine for Die-Cutting, Embossing, Waste Stripping and Blank Separation Used machine, factory-refurbished by QTM Schwalmtal System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic die-cutting, creasing, and embossing with or without gripper edge ⦁ For internal waste stripping as well as stripping of side and rear sheet edges ⦁ For stack-wise delivery of die-cut and stripped sheets with remaining gripper edges, or ⦁ For separation of gripper edges and subsequent stack-wise delivery of the residual sheets ⦁ With patented gripper carriage register system for highest registration accuracy ⦁ With bundle stacker enabling fully automatic separator sheet feeding and NON-STOP delivery, even for smallest cut sizes without requiring changeover (exchange table with comb structure) ⦁ Separator sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device in the delivery section ⦁ Modem ⦁ Standard machine height extension 600 mm Hsdpfx Abet E Nthjheh Specification Max. sheet size: 1060 x 1450 mm Min. sheet size: 500 x 700 mm Max. die-cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet change device in delivery section Including platform Control system upgraded to Siemens S7 Completely overhauled machine drive Quick-action clamping frames in all tooling stations

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Machine type: Embossing and Die-Cutting System / Automatic Platen Die Cutter Machine number: 400018 Year of manufacture: 2004 Machine Data Max. cycles per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Max. width: approx. 2,400 mm Max. height: approx. 3,200 mm Max. height with window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Feeder weight W4: approx. 3,000 kg Internal chase frame size: 820 x 1,134 mm Max. die-cut form size: 816 x 1,130 mm Largest cutting area: 800 x 1,120 mm with gripper margin Adjustable gripper margin: Standard 11–17 mm (13 mm wood before 1st knife), Optional 8–14 mm (10 mm wood before 1st knife) Cutting rule height: 23.8 mm Max. feeder pile height incl. pallet: 2,000 mm Max. delivery pile height incl. pallet: 1,700 mm Feeder pile weight: max. 1,000 kg Delivery pile weight: max. 1,000 kg Feeder rest pile height: max. 450 mm Feeder rest pile weight: max. 450 kg Auxiliary delivery pile height: max. 200 mm Auxiliary delivery pile weight: 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Max. pallet height: 170 mm Drive and Power Supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, there is a pneumatic clutch with a spring-loaded brake, allowing the machine to be engaged and disengaged. The motor remains constantly powered. The control cabinet, positioned at the machine, contains (with few exceptions) all switching devices for the die-cutter and feeder. Command and indicator devices are located on the machine and are distributed as necessary across the control panels. Control Cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Connections: 3-phase AC 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm Hodpfsv T T N Hex Abhjh The machine is in very good condition. A test run is possible at any time. Various accessories included. Patented QTM chain guide rails have already been retrofitted. Price: Negotiable

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Bobst SP 142 ER Year: 1987 Max. sheet size: 1020 x 1420 mm Min. sheet size: 700 x 520 mm Max. speed: 6,000 sheets/hour Hjdevhcgqepfx Abheh Max. cutting force: 600 t Centerline system Micrometric adjustment Currently in production

Leto izdelave: 2007, Stanje: dober (rabljeno), • Modell: BOBST Autoplatine® SPanthera 106 LER • Maschinentyp: Automatische Flachbettstanze mit Ausbrech- und Nutzentrennstation • Hersteller: BOBST • Kategorie: Hochleistungsstanze für Faltschachtelkarton und Verpackungen • Baujahr: 2007 • Betriebsstatus: „Maschine unter Strom“ _____ Format- & Materialfähigkeiten • Max. Bogenformat: 760 × 1.060 mm • Min. Bogenformat: ca. 350 × 400 mm • Max. Stanzformat: 745 × 1.055 mm • Greiferrand: ca. 8–10 mm • Kartonstärke: 0,1 – 2.000 g/m² (von Papier bis Schwerkarton) • Wellpappe: bis N-Welle / F-Welle (werkzeugabhängig) Hsdpfx Abexzr Hpeheh • Max. Stanzdruck: bis zu 260 t (BOBST Autoplatine-Standard) _____ Leistung & Ausstattung • Maximale mechanische Geschwindigkeit: bis zu 9.000 Bogen/Stunde • Automatisches Registersystem: integriert • Nutzentrennstation: Ja (LER = Logistics, Extraction, Removal = komplette Nutzentrennung) • Ausbrechstation: Vollautomatische 3-Rahmen-Ausbrechstation • Nonstop-Funktionalität: o Nonstop-Anleger (kontinuierliche Stapelzuführung) o Nonstop-Auslage (automatischer Stapelwechsel)

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, BRAUSSE 1450 SE Baujahr: 2008 Maximale Formatgröße: 1055 x 1450 mm Maximale Stanzkraft: 400 t Maximale Geschwindigkeit: 5.500 Hübe/Stunde Hsdpjt D Ncajfx Abheh Quicklock-System Centerline in Produktion

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, skupna širina: 6.400 mm, skupna dolžina: 7.800 mm, skupna višina: 2.500 mm, skupna masa: 30.000 kg, New machine Machine for die-cutting, embossing, waste stripping, and blank separation Specifications: Maximum sheet size: 830 x 1,150 mm Minimum sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300t) Speed: 7,000 sheets/hr Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic pile alignment at feeder 10” display at feeder Automatic non-stop delivery roll apron Stripping station Blank separation station Centerline system Automatic separator sheet inserter for stabilising blank stacks Quick-lock frames for upper stripping tool and central stripping board Quick-lock frames for upper and lower blanking tools Pneumatic chase clamps and die plate locking APC 1 – automatic cutting pressure control system APC 2 – platen tilting at the delivery end 1x 4 mm cutting plate incl. 10x 1 mm cutting plates 2x 5 mm cutting plates 1x quick-lock chase 2x chases without quick-lock Hsdpfet H Nhhsx Abheh QTM fine adjustment for cutting plates Sheet monitoring at each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Stanje: dober (rabljeno), Leto izdelave: 2014, nur ca. 150 Millionen Drucke Ausstattung CX-Paket Logistik – mit manuellem Non-Stop Anleger FAPC (Vollautomatischer Plattenwechsel) Preset Ergotronic Bedienpult WallScreen Display Colortronic Farbdosierung Varidamp Seitliche, Umfangs- und Diagonalregisterregelung Technotrans Beta c 220L (luftgekühlt) Farbtemperaturregelung CleanTronic Synchro – Walzen-/Gummituch-/Druckzylinderwascheinrichtung DriveTronic Anleger Hodjx Sdn Aopfx Abhsh SIS (Sensorisches Einlauf-System) Non-Stop Anleger – manuell, nicht vollautomatisch Non-Stop Ausleger – Rollo Erhöht auf einem Sockel (420 mm) Farbrührwerke (UV) EES CleanTronic Simultan-Gummituch- und Druckzylinderwascheinrichtung CleanTronic UV – separates UV-Waschsystem im Schrank UV-Zwischentrockner – 6x UV-Kassetten, beliebig positionierbar UV-Zwischentrockner – Positionen an allen 6 Druckwerken, an den Trockentürmen und 3 Positionen am Ausleger Lackwerk 1: Harris & Bruno Lack- und UV-Pumpen mit Vorbereitungstanks (beheizt) Trockenturm 1: VariDry IR/Heißlufttrockner (plus Interdeck-Position) Trockenturm 2: VariDry IR/Heißlufttrockner (plus Interdeck-Position) Lackturm 2: Harris & Bruno Lack- und UV-Pumpen mit Vorbereitungstanks (beheizt) Drivetronic SFC Simultanformwechsel (an Lackwerken) KBA VariDry IR/Heißluft/UV – am Druckmaschinenende ALV3 Verlängerte Auslage

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 23.000 h, Bobst SP 142 CER II Hodpoxxypyefx Abhjh