Ovijalec nakup rabljenega (151)

Stanje: novo, Leto izdelave: 2026, skupna masa: 280 kg, skupna dolžina: 23.740 mm, skupna širina: 15.000 mm, skupna višina: 20.750 mm, vhodna napetost: 230 V, About this machine: This machine comes with a 24-month warranty. Upon request, we can also offer you a suitable drive-on ramp, a photocell for black object detection, or the appropriate machine stretch film! About this model: Crodps Ah E Dqefx Afwoi Our 'Starter' pallet wrapper is a semi-automatic stretch wrapper—ideal if you no longer wish to wrap your pallets manually or are looking for a cost-effective backup unit. Our Vogel Starter is likely the most affordable pallet wrapper produced in Europe, and that’s without compromising on quality. Unlike our other pallet wrappers, the options for this model are intentionally limited; since our aim was to develop a wrapper that could be produced as economically as possible through extensive standardization while covering a wide range of applications. With its 3 program settings, you can adjust the speed of the film carriage and turntable as well as select whether you prefer a 'cross wrapping' or simply an 'upward wrapping' process. Both top and bottom wrap cycles can be saved per program. The film tension is easily regulated via a mechanical film brake. All settings can be password protected, allowing operators to choose only from the pre-configured programs. With a weight of 280 kg, this model is rated for loads up to 1,200 kg. Our Starter pallet wrappers feature a 1,500 mm turntable and, as standard, can wrap pallets up to a height of 2,100 mm. Automatic pallet detection via photocell comes as standard, as do adjustable top & bottom wrap cycles. If the wrapper needs to be relocated, it can be easily lifted and moved by forklift using the integrated notches. This model is our recommendation if you want to move away from manual wrapping while relying on a robust, European-made machine. About us: We believe that business is made between people! A supplier delivers your ordered goods—a partner does more: They help you find the best goods. They support you in achieving your goals and stand by your side when there are problems or challenges! This is our philosophy. For over 40 years and now in the 4th generation, we have been the partner of choice for SMEs in all aspects of 'Stretching and Bonding'. On request, we are also happy to advise you on which pallet wrapper from our portfolio offers the best solution for your requirements!

Leto izdelave: 2026, obratovalne ure: 2 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Csdpfxez Iqnvo Afwori Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) F06 – Number of wraps at pallet top (1–10 revolutions) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2026, stanje: novo, Our KVK 1S – Economic is our most affordable option for acquiring a semi-automatic stretch wrapper. With this wrapper, only the application and removal of the film need to be performed manually. The model is sturdily built, weighing 600 kg, and designed for loads of up to 1,500 kg. The KVK 1S Economic features a 1,500 mm turntable and can wrap pallets up to 2,250 mm in height. With adjustable speeds for the turntable and film carriage as well as a mechanical brake, you can easily adapt the automated wrapping process to suit your product. Automatic pallet detection is a standard feature, as are adjustable top and bottom wraps. You can choose from programs for “up only” wrapping, “up & down” (cross-wrapping), and rainproof wrapping. If needed, the wrapper can also be operated manually. Crodps Ah E Ahofx Afwoi If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift cutouts. An optional access ramp and a photocell for detecting dark goods or black film are available. The KVK 1S Economic is our recommendation if you intend to switch from manual to automatic pallet wrapping with the lowest possible investment. This machine is ideal for shippers handling up to approximately 10 pallets per working day. For further information, we have attached the technical data sheet as a PDF to this listing!

Leto izdelave: 2026, stanje: novo, Our KVK 1S – Economic is our most affordable option for acquiring a semi-automatic stretch wrapper. With this wrapper, only the application and removal of the film need to be performed manually. The model is sturdily built, weighing 600 kg, and designed for loads of up to 1,500 kg. The KVK 1S Economic features a 1,500 mm turntable and can wrap pallets up to 2,250 mm in height. Crodpfs Ah E Dfsx Afwoi With adjustable speeds for the turntable and film carriage as well as a mechanical brake, you can easily adapt the automated wrapping process to suit your product. Automatic pallet detection is a standard feature, as are adjustable top and bottom wraps. You can choose from programs for “up only” wrapping, “up & down” (cross-wrapping), and rainproof wrapping. If needed, the wrapper can also be operated manually. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift cutouts. An optional access ramp and a photocell for detecting dark goods or black film are available. The KVK 1S Economic is our recommendation if you intend to switch from manual to automatic pallet wrapping with the lowest possible investment. This machine is ideal for shippers handling up to approximately 10 pallets per working day. For further information, we have attached the technical data sheet as a PDF to this listing!

Leto izdelave: 2026, stanje: novo, Our KVK 1S – Economic is our most affordable option for acquiring a semi-automatic stretch wrapper. With this wrapper, only the application and removal of the film need to be performed manually. The model is sturdily built, weighing 600 kg, and designed for loads of up to 1,500 kg. The KVK 1S Economic features a 1,500 mm turntable and can wrap pallets up to 2,250 mm in height. With adjustable speeds for the turntable and film carriage as well as a mechanical brake, you can easily adapt the automated wrapping process to suit your product. Automatic pallet detection is a standard feature, as are adjustable top and bottom wraps. You can choose from programs for “up only” wrapping, “up & down” (cross-wrapping), and rainproof wrapping. If needed, the wrapper can also be operated manually. If the wrapper needs to be relocated, it can be easily lifted and moved using integrated forklift cutouts. An optional access ramp and a photocell for detecting dark goods or black film are available. Cjdpfj Ah E Atsx Afweri The KVK 1S Economic is our recommendation if you intend to switch from manual to automatic pallet wrapping with the lowest possible investment. This machine is ideal for shippers handling up to approximately 10 pallets per working day. For further information, we have attached the technical data sheet as a PDF to this listing!

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S26LybraOPRS01, LYBRA Easy OPRS / 6 programov LYBRA OPRS je polavtomatski stroj za spiralno ovijanje s rotacijsko roko, ki združuje najpomembnejše tehnologije za pritrditev tovora v kompaktni rešitvi. Z združevanjem drsnega sistema OPRS, sistema ARYA in naprave za vrv zagotavlja natančno vodenje folije, avtomatizirano upravljanje cikla ovijanja in izboljšano pritrditev tovora na kritičnih točkah palete. Zahvaljujoč rotacijski roki je posebej primeren za težke in nestabilne tovore ter optimizira stabilnost tovora pri rokovanju, skladiščenju in transportu. TEHNIČNE PODROBNOSTI - Nadzorna plošča z zaslonom KEY - Premer Ø 1.700 mm - Največje dimenzije tovora: 1.200 x 1.200 mm - Višina ovijanja (vključno s paleto): 2.450 mm - Merjenje višine tovora s foto celico v samodejnem načinu - Nadzor ramp za pospeševanje/zaviranje preko frekvenčnega pretvornika - Nastavljiva hitrost dviga (gibanje navzgor/navzdol) preko frekvenčnega pretvornika - Varnostna zaščita pred dotikom - Gumb za izklop v sili v obliki gobice v skladu s standardi CE - Gumb za ponastavitev stroja v skladu s standardi CE - Zvočni signal ob začetku cikla in ob ustavljanju cikla na koncu NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi parametri funkcij so nastavljivi preko zaslona. - Standardni cikel (navzgor in navzdol) - Polovični cikel (samo navzgor ali samo navzdol) - Polni cikel z spodnjimi sloji na isti začetni višini - Hiter cikel (z omejenim ali brez prekrivanja) - Slojni cikel Codpfjz Irr Ajx Afwori - Ekonomični cikel (za prihranek nekaj spodnjih slojev) NASTAVLJIVI PROGRAMI OVIJANJA NA NADZORNI PLOŠČI 6 programov ovijanja, ki jih nastavi uporabnik - Vsi parametri funkcij so nastavljivi na zaslonu - Število vrtljajev od 5 do 12 na minuto je nastavljivo - Hitrost dviga vozila (gibanje navzgor in navzdol) je neodvisno nastavljiva od 1,3 do 5,4 m/min - 1 do 10 slojev na dnu - 1 do 10 slojev na vrhu - Dodatni sloji med postopkom ovijanja AKTIVIRANE FUNKCIJE: - Zaklepanje tipk - Cikel s funkcijo zagona in ustavitve na prednastavljeni višini - Višina ovijanja palete z merilnikom višine (foto celica izklopljena) - Cikel za zaščitni sloj, cikel za mehki zagon - Cikel ovijanja z dodatnimi sloji in nastavljivim številom slojev - Udobna višina za enostavno menjavo valjev SLIČNI SISTEM OPRS - Motorizirani sistem za prednapenjanje z 2 elektronsko gnanim valjema z zamenljivimi prenosnimi razmerji: 150 % - 200 % (standard) in 250 % - Zunanji premer valja za folijo: 250 mm - Premer notranjega valja: 76 mm - Višina valja: 500 mm - Teža valja: 20 kg SISTEM ZA NAMEŠČANJE FOLIJE Arya: Samodejno namesti folijo na izdelek. Druge naprave so na voljo takoj iz skladišča Ludwigsburg. Slika je podobna, lahko vključuje dodatne možnosti.

Stanje: novo, Leto izdelave: 2026, skupna masa: 260 kg, skupna dolžina: 25.080 mm, skupna širina: 15.000 mm, skupna višina: 24.250 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: This pallet wrapper is a new device in stock. You receive a 24-month warranty with this machine. On request, we can also offer you a suitable ramp, a photocell for black pallet detection, or the appropriate machine film! About this model: Our "Basic" pallet wrapper is a semi-automatic stretch wrapping machine made in Europe, which ensures consistently reliable results by allowing up to 10 programmable settings and thus eliminates the "human factor". With the electromagnetic brake, you can adjust the film tension according to your requirements and save these settings in the programs. Credpfs Ah E E Dex Afwei Within the programs, you can also customize the speeds of the film carriage and turntable. Top and bottom wraps can be set and saved individually for each program. This way, you can configure custom programs for every packing scheme, ensuring perfect wrapping results every time. With a weight of 260 kg, this model is built for loads of up to 1200 kg. Our Basic pallet wrapper features a 1500 mm turntable and can wrap pallets up to 2000 mm in height as standard. Automatic recognition of your pallets (via photocell) is standard, as are adjustable top and bottom wraps. If you need to move the wrapper to another location, it can easily be lifted and relocated by forklift using the integrated forklift slots. This model is our recommendation if you are looking for a reliable and cost-effective pallet wrapper that adapts to your requirements. About us: Business is done between people—this is our conviction! A supplier delivers the goods you order—a partner does more: they help you find the best solution, support you in achieving your goals, and stand by you in case of problems or challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner of medium-sized businesses in all aspects of "stretching and bonding." Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your specific needs!

Stanje: novo, Leto izdelave: 2026, skupna masa: 260 kg, skupna dolžina: 25.080 mm, skupna širina: 15.000 mm, skupna višina: 24.250 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: This pallet wrapper is a new device in stock. You receive a 24-month warranty with this machine. On request, we can also offer you a suitable ramp, a photocell for black pallet detection, or the appropriate machine film! About this model: Csdpfxs Ah E E Ie Afweri Our "Basic" pallet wrapper is a semi-automatic stretch wrapping machine made in Europe, which ensures consistently reliable results by allowing up to 10 programmable settings and thus eliminates the "human factor". With the electromagnetic brake, you can adjust the film tension according to your requirements and save these settings in the programs. Within the programs, you can also customize the speeds of the film carriage and turntable. Top and bottom wraps can be set and saved individually for each program. This way, you can configure custom programs for every packing scheme, ensuring perfect wrapping results every time. With a weight of 260 kg, this model is built for loads of up to 1200 kg. Our Basic pallet wrapper features a 1500 mm turntable and can wrap pallets up to 2000 mm in height as standard. Automatic recognition of your pallets (via photocell) is standard, as are adjustable top and bottom wraps. If you need to move the wrapper to another location, it can easily be lifted and relocated by forklift using the integrated forklift slots. This model is our recommendation if you are looking for a reliable and cost-effective pallet wrapper that adapts to your requirements. About us: Business is done between people—this is our conviction! A supplier delivers the goods you order—a partner does more: they help you find the best solution, support you in achieving your goals, and stand by you in case of problems or challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner of medium-sized businesses in all aspects of "stretching and bonding." Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your specific needs!

Stanje: dober (rabljeno), Naprava za ovijanje palet, strojna naprava za zatezanje palet, posebna izvedba za uporabo z ročnimi viličarji – rabljena: Cena ob prevzemu: 4.750,00 € (neto), vključno z natovarjanjem! Zelo robustna naprava! Tip HAD 1500NH Letnik izdelave: 2012 Csdpoz Sfaqsfx Afwsri Št. 274. z naslednjo osnovno opremo: 2 programa (navojno in križno ovijanje) Foto celica (vklopna in izklopna) Prosto izbiranje spodnjega in zgornjega ovijanja mehanska zavora folije mehek zagon vrtilnega stola nastavljiv naklon folije, največja višina palete 2200 mm premer vrtilnega stola 1500 mm programirljiva hitrost vrtilnega stola varnostna svetlobna pregrada na odprtem vrtilnem stolu Stanje: zelo dobro Na voljo: takoj Lokacija: 91177 Thalmässing Fotografija je podobna:

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S26LybraOPRS02, LYBRA Easy OPRS / 6 programov LYBRA OPRS je polavtomatski stroj za spiralno zavijanje s rotacijsko roko, ki združuje najpomembnejše tehnologije za pritrditev tovora v kompaktno rešitev. Z združitvijo drsnega nosilca OPRS in opcijskega sistema ARYA ter opcijske funkcije oblikovanja vrvice zagotavlja natančno vodenje folije, avtomatizirano upravljanje cikla zavijanja in izboljšano pritrditev tovora na kritičnih točkah palete. Zaradi rotacijske roke je posebej primeren za težke in nestabilne tovore ter optimizira stabilnost tovora med rokovanjem, skladiščenjem in transportom. TEHNIČNE PODROBNOSTI - Nadzorna plošča z zaslonom KEY - Premer Ø 1.700 mm - Največje dimenzije tovora: 1.200 x 1.200 mm - Višina zavijanja (vključno s paleto): 2.450 mm - Merjenje višine tovora s foto celico v avtomatskem načinu - Nadzor pospeševalnih/zavirajočih krivulj prek frekvenčnega pretvornika - Nastavljiva hitrost dviga (navzgor/navzdol) prek frekvenčnega pretvornika - Varnostna zaščita pred dotikom - Gumb za izredno zaustavitev v obliki gobice v skladu s standardi CE - Gumb za ponastavitev stroja v skladu s standardi CE - Zvočni signal ob začetku cikla in ob koncu faze na koncu cikla NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi funkcionalni parametri so nastavljivi preko zaslona Codpfxsz Irx Nj Afwori - Standardni cikel (navzgor in navzdol) - Polcikel (samo navzgor ali samo navzdol) - Celoten cikel z zgornjimi plastmi na isti začetni višini - Hitri cikel (z omejeno ali brez prekrivanja) - Cikel po plasteh - Ekonomični cikel (za prihranek nekaj spodnjih plasti) NASTAVLJIVI PROGRAMI ZAVIJANJA NA NADZORNI PLOŠČI 6 programov zavijanja, ki jih ustvari uporabnik - Vsi funkcionalni parametri so nastavljivi na zaslonu - Število vrtljajev nastavljivo od 5 do 12 vrt/min - Hitrost dviga vozička (navzgor in navzdol) nastavljiva neodvisno od 1,3 do 5,4 m/min - 1 do 10 plasti na dnu - 1 do 10 plasti na vrhu - Dodatne plasti med procesom zavijanja AKTIVIRANE FUNKCIJE: - Zaklepanje tipk - Cikel s funkcijo začetka in zaustavitve na vnaprej programirani višini - Višina zavijanja palete z merilnikom višine (foto celica izklopljena) - Cikel za zaščitno folijo, cikel z mehkega zagona - Cikel zavijanja z dodatno zaščito in nastavljivim številom plasti - Udobna višina za enostavno menjavo valjev DRSNA PLOŠČA ZA FOLIJO OPRS - Motoriziran sistem prednapenjanja z 2 elektronsko gnanim valjema z izmenljivimi prenosnimi razmerji: 150 % - 200 % (standard) in 250 %; - Zunanji premer zvitka folije: 250 mm; - Premer notranjega tulca: 76 mm; - Višina zvitka: 500 mm; - Teža zvitka: 20 kg; Druge naprave so na zalogi v skladišču Ludwigsburg in so na voljo takoj. Slika je podobna, lahko vsebuje dodatne možnosti.

Stanje: novo, Leto izdelave: 2026, skupna masa: 500 kg, skupna dolžina: 28.650 mm, skupna širina: 16.500 mm, skupna višina: 25.230 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: You receive a 24-month warranty with this machine. Upon request, we can also offer you suitable ramp options, a photoelectric sensor for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper, which guarantees absolutely consistent results with up to 32 storable programs, thus eliminating any “human factor.” It is as space-saving as a pallet wrapper with horseshoe turntable, and as robust as a closed system – the advantages of this machine are clear and to the point! The electromagnetic brake allows precise adjustment of film tension, and the settings for base wraps, upward wraps, top wraps, and downward wraps can be saved in each program. Within the programs, you can further adjust the speed of the film carriage and turntable, as well as store the number of top and bottom wraps and the film overlap at the pallet end individually for each program. This enables you to set up customized programs for each packing scheme, ensuring consistently perfect wrapping results. The programs can be password-protected so operators can only select from pre-set programs. With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection via photoelectric sensor, as well as adjustable head and foot wraps, come as standard. This model is our recommendation if you have limited space and require a professional, robust pallet wrapper that is fully adaptable to your needs. Codpfxe Ah E Ego Afwori Would you like a taller mast, pre-stretch film unit, or automatic film cutting? With this machine, almost anything is possible! We are happy to configure this machine as a new unit with any options tailored to your requirements. About us: Business is done between people – we are convinced of that! A supplier delivers the goods you order – a partner does more: they help you find the best solution, support you in achieving your goals, and are by your side when facing challenges. That is our philosophy. For over 40 years and in the 4th generation, we have been the partner for SMEs when it comes to 'stretching and sealing.' If you wish, we also provide expert advice on which pallet wrapper in our portfolio is the best solution for your requirements!

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S26LybraOPRS03, LYBRA Easy OPRS / 6 programov Z avtomatskim sistemom za navijanje folije za dodatno zaščito tovora v različnih korakih na paleti. LYBRA OPRS je polavtomatski stroj za navijanje folije s rotacijskim roko, ki združuje najpomembnejše tehnologije za pritrditev tovora v kompaktno rešitev. Z združitvijo drsnega mehanizma OPRS in opcijskega sistema ARYA ter opcijskega sistema za navijanje folije zagotavlja natančno vodenje folije, avtomatizirano upravljanje cikla navijanja in izboljšano pritrditev tovora na kritičnih točkah palete. Zahvaljujoč rotacijskemu roku je posebej primeren za težke in nestabilne tovore ter optimizira stabilnost tovora pri ravnanju, shranjevanju in transportu. TEHNIČNE PODROBNOSTI - Nadzorna plošča z zaslonom KEY - Premer Ø 1.700 mm - Največje dimenzije tovora: 1.200 x 1.200 mm - Višina navijanja (vključno s paleto): 2.450 mm - Merjenje višine tovora s fotocelico v avtomatskem načinu - Krivulje pospeševanja/zaviranja, ki jih nadzoruje frekvenčni pretvornik - Nastavljiva hitrost dviga (navzgor/navzdol) prek frekvenčnega pretvornika - Varnostna zaščita pred dotikom - Gumb za izklop v sili v obliki glive, v skladu s standardi CE - Gumb za ponastavitev stroja, v skladu s standardi CE - Zvočni signal ob začetku cikla in ob ustavitvi cikla na koncu Crjdpfx Aez Ir Haefwoi NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi parametri funkcij so nastavljivi preko zaslona -Standardni cikel (navzgor in navzdol) -Polovični cikel (samo navzgor ali samo navzdol) -Celoten cikel z nižjimi plastmi na isti začetni višini -Hiter cikel (z omejenim ali brez prekrivanja) -Cikel po plasteh -Varčevalni cikel (za prihranek nekaj spodnjih plasti) NASTAVLJIVI PROGRAMI NAVIJANJA NA NADZORNI PLOŠČI 6 programov navijanja, ki jih ustvari uporabnik -Vsi parametri funkcij so nastavljivi na zaslonu -Število vrtljajev od 5 do 12 vrt/min je nastavljivo -Hitrost dviga vozička (navzgor in navzdol) je neodvisno nastavljiva od 1,3 do 5,4 m/min -1 do 10 plasti na dnu -1 do 10 plasti na vrhu -Dodatne plasti med postopkom navijanja AKTIVIRANE FUNKCIJE: -Zaklepanje tipk -Cikel s začetkom in ustavljanjem na prednastavljeni višini -Višina navijanja palete s senzorjem višine (fotocelica izklopljena) -Cikel za pokrivno folijo, cikel za mehki zagon -Cikel navijanja z ojačitvijo in nastavljivim številom plasti -Udobna višina za enostavno menjavo valjev DRSNA PLOŠČA ZA FOLIJO OPRS -Motorizirani sistem za raztezanje z 2 elektronsko pogonjenima valjema z zamenljivimi razmerji: 150 % - 200 % (standard) in 250 %; -Zunanji premer tuljave folije: 250 mm; -Premer osrednjega tuljave: 76 mm; -Višina tuljave: 500 mm; -Teža tuljave: 20 kg; Druge naprave so takoj na voljo v skladišču Ludwigsburg. Slika je podobna in lahko vsebuje dodatne možnosti.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm Credpfxjz Ipwcs Afwji · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm – 200mm, for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at stretch start and cycle end Emergency stop button in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All machine parameters adjustable via display F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage lift speed upwards from 1.3 to 5.4 m/min F04 – Carriage lift speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Pallet wrap height setting F62 – Ergonomic film change height ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only upwards or only downwards) F01-3 – Manual wrapping F12 – Wrapping to a set height (disabling photoelectric sensor) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification max. outside diameter Ø 250 mm – core Ø 76mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other units available from stock at short notice. Crjdoz Ipr Hopfx Afwji

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter: Ø 1,700 mm Height: 2,200 mm Max. pallet dimension: 1,200 x 1,200 mm Rotation arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, independently adjustable for ascent/descent Acoustic signal at wrap start and at cycle end stop Emergency stop switch according to CE regulations Positioning aid for precise pallet placement included in delivery Safety bumper for collision protection Push buttons for machine power-on and Start & Stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operating parameters adjustable via display F02 – Infinitely adjustable turntable speed 5–12 rpm Carriage ascent and descent speeds independently adjustable F03 – Carriage ascent speed from 1.3 up to 5.4 m/min F04 – Carriage descent speed from 1.3 up to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) Cjdpoz Iprtsfx Afweri F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photocell activation delay for wrap height F62 – Ergonomic height for film changing ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 3 programmable wrap cycles storable F01–1: Cross wrapping (upwards/downwards) F01–2: Single wrapping (only upwards or downwards) F01–3: Push button for manual operation F12: Wrapping to a programmed height (photo sensor for height disabled) F22 / F23: Wrapping cycle for top sheet film F29: Soft start cycle for edge protection placement Soft start cycle to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on film carriage Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE With electromagnetically braked roller Film specs: Max. outside diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard power requirements: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A; 1.75 kW / 8.5A (with PRS / PS) Manual rope forming also available as an option. Further machines available ex stock Ludwigsburg for immediate delivery.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SFERA21Kommission4, Stretch wrapper ATLANTA SFERA Easy 6 individually programmable programs Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any door) FE electromagnetic film brake Film tension electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76mm GMK (compass): Start and end points of wrapping always identical Film tension can be stored in 4 steps Crsdpsz Inavofx Afwji TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or by measurement input on display Protective bar for emergency stop on drive unit Emergency stop switch in accordance with CE regulations Acoustic warning and flashing light at machine startup Fall protection for film carriage Push-button for start & stop Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL: All function parameters adjustable via display F00 - Display lock for program modification F02 - Adjustable machine speed around the pallet up to 80 m/min Carriage ascent and descent speeds adjustable independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Setting of pallet wrapping height F13 - F16 - Film tension for base/top wraps and ascent/descent independently adjustable F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL: 6 programmable wrap cycles for SFERA EASY F01-1 - Cross wrapping (up/down) F01-2 - Simple wrapping (up or down only) F10 - F11 - Wrapping cycle with specified start and stop height F12 - Wrapping to a preset height (disabling the height photoelectric sensor) F21 - Wrapping cycle for large dimension pallets F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for corner protection application F30 - F31 - Reinforced wrapping cycle with adjustable number of wraps Soft start function to reduce film tears on sharp pallet corners Wrapping cycle with manual or motor-driven rope forming (optional) Optional photo sensor for dark goods *Leasing: Term 48 months // 0 down payment Unit was in operation as a replacement device at a customer for 3 months. Has a few scratches – also on the housing – see pictures. Unit is in excellent condition. We are happy to send you further images. Unit can be inspected in Ludwigsburg by appointment. Available immediately. Price ex stock Ludwigsburg.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Lybra04, Exhibition unit - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet size: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, upward/downward adjustable Acoustic signal at wrap start and cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Pushbuttons for machine power-on and start & stop function as per CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards & downwards can be set independently F03 - Carriage upward speed from 1.3 up to 5.4 m/min F04 - Carriage downward speed from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Photocell wrap height delay F62 - Ergonomically settable height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 3 programmable wrapping programs F01-1 - Cross wrapping (upwards/downwards) F01-2 - Single wrap (only upwards or only downwards) F01-3 - Pushbutton for manual functions F12 - Wrap to a preset height (with photoelectric sensor deactivated for height) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for applying edge protection Cedpfoz Ipx Hex Afweri Soft start cycle reduces film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Electromagnetically braked roller Film specification: Max. external diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW/6A – 1.75 kW/8.5A (with PRS/PS) Manual rope-forming device available as an option. Several more systems available from stock in Ludwigsburg for immediate delivery.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi11, StretchWickler Synthesi Izvedba stroja Freezer -30 stopinj, IP65 TEHNIČNE PODROBNOSTI Vrtljiva plošča / osnovna konstrukcija / premer 1.500 mm Maks. dimenzije palete: 800 x 1.200 mm Maks. nosilnost: 2.000 kg Višina navijanja (vključno s paleto) 2.400 mm NOSILEC ZA FOLIJO TIPA „OPRS - ONE PRE STRETCH“ Prednapetost folije nastavljena na 200 % Napetost folije nastavljiva elektronsko v programih v različnih korakih Višina vrtljive plošče 75 mm Prepoznavanje višine s fotoelektričnim senzorjem Vrtljiva plošča z reguliranim pogonom (mehki zagon - zagon/ustavitev) Regulirana hitrost dvigala navzgor/navzdol Zvočni signal ob začetku in koncu navijanja Gumb za nujno ustavitev v skladu s predpisi CE Ustavitev vrtljive plošče vedno v istem začetnem položaju Varovalo proti padcu nosilca folije Tipkalo za vklop stroja ter funkcijo zagon in ustavitev ter ponastavitev v skladu s standardi CE, premer 22 mm NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi parametri funkcij nastavljivi preko zaslona F00 – Zaklepanje zaslona, sprememba programa F02 – Brezstopenjsko nastavljiva hitrost vrtljive plošče 5-12 vrt/min Hitrost dvigala navzgor in navzdol je mogoče nastavljati neodvisno F03 – Hitrost dvigala navzgor od 1,3 do 5,4 m/min F04 – Hitrost dvigala navzdol od 1,3 do 5,4 m/min F05 – Število navojov na dnu palete (1–10 navojov) F06 – Število navojov na vrhu palete (1–10 navojov) F09 – Zamuda foto celice za višino navijanja F13 – F16 – Napetost folije za navijanje na dnu in vrhu / dvig in spuščanje, nastavljivo neodvisno F62 – Ergonomična višina za zamenjavo folije Prikaz porabe folije (opcija) NASTAVLJIVI PROGRAMI NAVIJANJA NA NADZORNI PLOŠČI 6 programov navijanja, ki jih je mogoče shraniti Crjdpfjz Iq I Asx Afwsi F01 - 1 - Navijanje v križu (navzgor/navzdol) F01 - 2 - Enostavno navijanje (samo navzgor ali samo navzdol) F01 - 3 - Tipkalo za ročne funkcije F10 - F11 - Cikel navijanja z določeno začetno in končno višino F12 - Navijanje na določeno višino (ob izklopu foto senzorja za višino) F22 / F23 - Cikel navijanja za zaščitno folijo F29 - Mehki zagon cikla za pritrditev zaščite robov F30 - F31 - Cikel navijanja z ojačanjem in nastavljivim številom navojov Mehki zagon za zmanjšanje trganja folije na ostrih robovih palet Cikel navijanja z ročno ali motorično tvorbo nitke (opcija) Cikel ojačanja s tipkalo Na voljo kot opcija: Velikost vrtljive plošče do premera 2600 mm Višina stebra do 3900 mm Rampa Montažni okvir Foto senzor za črne izdelke Naprava za rezanje folije itd. Druge naprave so na voljo v skladišču Ludwigsburg. Slike lahko vključujejo nekatere dodatne možnosti, za katere se plača doplačilo. Slika je podobna.

Stanje: novo, Leto izdelave: 2026, skupna masa: 420 kg, skupna dolžina: 28.650 mm, skupna širina: 15.000 mm, skupna višina: 25.800 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: This pallet wrapper is a brand-new unit in stock. You receive a 24-month warranty with this machine. On request, we can also supply a suitable drive-on ramp, a photocell for black product detection, or the matching machine stretch film! About this model: Credpfxo Ah E Eyj Afwoi Our Profiline is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thus eliminating the "human factor." The electromagnetic brake allows you to store the film tension for each individual step (bottom wraps, upwards wrapping/head wraps, downwards wrapping) within your programs. You can also set the speed of the film carriage and turntable as well as save parameters like top wraps, bottom wraps, and film overlap at the end of the pallet for each program. This enables you to store customized programs for each packing scheme, ensuring optimal wrapping results every time. The programs can be password-protected so operators can only select from the predefined programs. Weighing 420 kg, this model is designed for loads up to 1200 kg (optionally up to 2000 kg). Our Profiline is equipped with a 1500 mm turntable and is standard-fit for wrapping pallets up to 2500 mm in height. Automatic pallet detection via photocell is standard, as are adjustable top and bottom wraps. If the wrapper needs to be relocated, integrated fork slots allow easy lifting and repositioning by forklift. This model is our recommendation if you are looking for a professional and rugged pallet wrapper for higher volumes, which can be optimally tailored to your requirements. Would you like a larger turntable, higher mast, film pre-stretch or an automatic film cutting system? With this machine, almost anything is possible! We are happy to configure this machine as a custom new unit to your exact requirements. About us: Business is made between people – this is our conviction! A supplier simply delivers the ordered product – a true partner does much more: They help you find the best solution and support you in reaching your goals, even assisting you when challenges and problems arise. This is our philosophy. For over 40 years and now in its fourth generation, we have been the partner for small and medium-sized businesses on all things "stretching and bonding." On request, we’ll be happy to advise you on which pallet wrapper from our portfolio offers the ideal solution for your needs!

Leto izdelave: 2000, stanje: dober (rabljeno), Naprava za zavitje palet, stroj za zategovanje folije na paletah, Strema, H 1300 – rabljeno: Cena ob prevzemu: 1.950,00 € (neto), vključno z natovarjanjem! Proizvajalec: Strema Tip: H 1300 Letnik: 2000 Serijska številka stroja: 23123 Premer vrtljivega krožnika: približno 1,60 m Naprava je vgrajena v talno površino hale, zato ni potrebna rampa ali podobno. Višina stebra: približno 2,70 m 3x 400 VAC, 50 Hz, 16 A Csdpoz Sd A Refx Afweri Stanje: dobro Na voljo: takoj Lokacija: Bünde, Severno porejnje-Vestfalija

Stanje: novo, Leto izdelave: 2026, skupna masa: 420 kg, skupna dolžina: 31.000 mm, skupna širina: 16.800 mm, skupna višina: 25.800 mm, vhodna napetost: 230 V, trajanje garancije: 24 meseci, About this machine: This Profiline TP pallet wrapper is a new stock machine. You will receive a 24-month warranty with this machine. Upon request, we can also offer you a suitable ramp, a photocell for detecting dark items, or the appropriate machine stretch film! About this model: Our Profiline TP is a semi-automatic stretch wrapper that guarantees consistently reliable results with up to 32 programmable settings, effectively eliminating the "human factor" from the wrapping process. The electromagnetic brake allows you to precisely set and store film tension at different stages (bottom wraps, upward wrap/head wraps, downward wrap) within each program. You can also customize the speed of the film carriage and turntable in each program. Additionally, head wraps, bottom wraps, and film overlap at the pallet end can be stored for every program. This lets you configure custom programs for each packing schema, ensuring optimal wrapping results every time. Programs can be password protected so that users can only select from the preset programs. Weighing 420 kg, this model is designed for loads up to 1,200 kg. Our Profiline TP features a 1,650 mm turntable and can wrap pallets up to 2,500 mm high as standard. Automatic pallet detection (via photocell) and adjustable head and bottom wraps are standard features. If you need to move the wrapper to a different location, it can be easily lifted and relocated with a forklift via built-in slots. This model is our top recommendation for businesses needing a robust, professional pallet wrapper for higher throughput, with minimal footprint. Looking for a taller mast, film pre-stretch, or automatic film cutting? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with the options tailored to your needs. About us: Business is done between people – that’s our belief! Crodpfx Aj Ah E D Aofwsi A supplier provides the goods you order – a partner offers more: They help you find the best solution, support you in achieving your goals, and stand by you through challenges. That’s our commitment. For over 40 years, now in the 4th generation, we have been the trusted partner of SMEs for all matters related to “stretch wrapping and adhesive solutions.” On request, we’re happy to advise you on which pallet wrapper from our portfolio is the optimal solution for your requirements!

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25Synthesi01, StretchWickler Synthesi TEHNIČNE PODROBNOSTI Vrtljiv pladenj / osnovna konstrukcija / premer 2.400 mm Maks. dimenzije palete: 1.650 x 1.650 mm Maks. nosilnost: 2.000 kg Višina ovijanja (vključno s paleto): 2.400 mm NOSILEC FOLIJ TIPA »OPRS – ONE PRE STRETCH« Prednapetost folije nastavljena na 200 % Napetost pritrditve folije se lahko elektronsko nastavi v programih v različnih korakih Višina vrtljivega pladnja: 75 mm Ugotavljanje višine s foto senzorjem Vrtljivi pladenj s frekvenčno reguliranim pogonom (mehki zagon – start/stop) Frekvenčno regulirana hitrost dvigala navzgor/navzdol Zvočni signal ob začetku in koncu ovijanja Gumb za izredno zaustavitev v skladu s predpisi CE Vrtljivi pladenj se vedno ustavi v istem začetnem položaju Varnostna naprava proti padcu za nosilec folije Gumb za vklop stroja, funkcijo start in stop ter reset v skladu s standardi CE, premer 22 mm NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi funkcionalni parametri se lahko nastavijo preko zaslona F00 – Zaklep zaslona, preprečevanje spremembe programa F02 – Brezstopenjska regulacija hitrosti vrtljivega pladnja, 5-12 vrt/min Hitrost dvigala navzgor in navzdol se lahko neodvisno nastavlja F03 – Hitrost dvigala navzgor od 1,3 do 5,4 m/min F04 – Hitrost dvigala navzdol od 1,3 do 5,4 m/min F05 – Število ovojev na dnu palete (1 – 10 ovojev) F06 – Število ovojev na vrhu palete (1 – 10 ovojev) F09 – Zamuda foto celice za višino ovijanja F13 – F16 – Napetost pritrditve folije pri ovoju dna in vrha / dvig in spuščanje se lahko neodvisno nastavljata F62 – Ergonomska višina za zamenjavo folije Prikaz porabe folije (opcija) NASTAVLJIVI PROGRAMI OVIJANJA NA NADZORNI PLOŠČI 6 programov ovijanja, ki jih je mogoče shraniti F01 - 1 – Križni ovoj (navzgor/navzdol) F01 - 2 – Enostavni ovoj (samo navzgor ali samo navzdol) F01 - 3 – Gumb za ročne funkcije F10 - F11 – Cikel ovijanja z vnaprej določeno začetno in končno višino F12 – Ovoj na vnaprej določeno višino (ob izklopu foto senzorja za višino) F22 / F23 – Cikel ovijanja za zaščitno folijo F29 – Mehki zagon cikla za pritrditev zaščite robov F30 – F31 – Cikel ovijanja z ojačanjem in nastavljivim številom ovojev Mehki zagon za zmanjšanje trganja folije pri ostrih robovih palet Cikel ovijanja z ročno ali motorično tvorbo vlaken (opcija) Cikel ojačanja s pritiskom na gumb Možne dodatne možnosti: Velikost vrtljivega pladnja do premera 2600 mm Višina stolpa do 3900 mm Rampa Vgradni okvir Foto senzor za črne izdelke Naprava za rezanje itd. Druge naprave so na voljo v skladišču Ludwigsburg. Slike lahko delno prikazujejo možnosti, za katere se doplačilo. Codpfx Afsz Iqp Tjwjri Slika je podobna.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, For sale: Three professional stretch wrapping robots for flexible and efficient pallet wrapping Available from stock: a Cyklop CSM Robot PRS from 2016, a Cyklop GL robot from 2013, and a Robopac S6 from 2017. All machines are suitable for a wide range of pallet sizes and are ideal for companies requiring flexibility and reliability in their logistics process. Cyklop CSM Robot PRS This mobile stretch wrapping robot from 2016 is equipped with a new battery (dated 10-2024) and operates fully autonomously around the pallet. Main features - Mobile wrapping robot suitable for all pallet formats - Powered pre-stretch system for efficient film savings - Automatic height detection - Adjustable wrapping programs - Ready for direct use thanks to the new battery - €3950,- Csdpfszbyc Tox Afwori Cyklop GL robot A compact and reliable stretch wrapping robot perfectly suited for variable pallet sizes and irregular loads. Main features - Flexible usability for different pallet types - Easy operation - Suitable for intensive daily use - Compatible with net wrapping - New batteries included - €3450,- Robopac S6 A modern and powerful stretch wrapping robot with extensive configuration options. Main features - Advanced wrapping programs - Suitable for high wrapping heights and variable loads - Reliable and stable operation - Equipped with a film tail inserter, so the film is cut at the end of the wrapping cycle - €3950 Machine condition All three machines are in clean and fully functional condition, ready for immediate use. Videos of the machines can be sent via WhatsApp. We also supply stretch film. For more information, please feel free to contact us. Trade-in of a (defective) pallet wrapper is possible. See also my other advertisements. Stretch wrapper, pallet wrapper, wrapping machine, stretchwrap machine, pallet stretch wrapper, wrapping robot, stretch wrapping robot, film wrapper, film, wrapper

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SFERA21Kommission1, StretchWickler ATLANTA SFERA Easy 6 programov, ki jih je mogoče individualno shraniti Višina navijanja 2200 mm Višina jambora 2050 mm (preide skozi skoraj vsaka vrata) FE elektromagnetna zavora folije Napetost folije se elektronsko nadzoruje preko upravljalne enote Specifikacija folije: maks. zunanji premer Ø300 mm – višina = 500 mm - notranji premer Ø76 mm GMK (kompas): začetek in konec navijanja sta vedno enaka Napetost folije je mogoče shraniti v 4 korakih TEHNIČNE PODROBNOSTI: dve bateriji AGM, ki ne zahtevata vzdrževanja, 12 V – 100 Ah, povezane v serijo 160 palet na polnjenje – čas polnjenja: 8–10 ur Visokofrekvenčni polnilnik baterij z LED-prikazovalnikom Višina navijanja: „stroj z jamborom (paleta vključena) 2.150 mm Ugotavljanje višine s svetlobnim senzorjem ali preko vnosa meritev na zaslonu Zaščitna palica za izklop pogona v sili Stikalo za izklop v sili v skladu s predpisi CE Akustični opozorilni signal in opozorilna luč ob zagonu stroja Varovalo proti padcu za drsnik folije Gumb za zagon in ustavitev Delovanje stroja v skladu s standardi CE Ø 22 mm NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI: Cjdpfxoz Inapj Afweri Vsi funkcionalni parametri so nastavljivi preko zaslona F00 – zaklepanje zaslona, sprememba programa F02 – nastavljiva hitrost stroja okoli palete do 80 m/min Hitrost drsnega mehanizma navzgor in navzdol je mogoče nastaviti neodvisno F03 – hitrost drsnega mehanizma navzgor od 1,3 do 5,4 m/min F04 – hitrost drsnega mehanizma navzdol od 1,3 do 5,4 m/min F05 – število navojov na dnu palete (1–10 navojov) F06 – število navojov na vrhu palete (1–10 navojov) F09 – nastavitev višine navijanja palete F13 – F16 – napetost folije pri navijanju spodnjega in zgornjega dela / dvig in spuščanje, neodvisno nastavljivo F62 – ergonomska višina za menjavo folije NASTAVLJIVI PROGRAMI NAVIJANJA NA NADZORNI PLOŠČI: 6 programov navijanja, ki jih je mogoče shraniti za SFERA EASY F01 - 1 - Križno navijanje (navzgor/navzdol) F01 - 2 - Enostavno navijanje (samo navzgor ali samo navzdol) F10 - F11 - Cikel navijanja z določeno začetno in končno višino F12 - Navijanje na prednastavljeno višino (ob izklopu svetlobnega senzorja za višino) F21 - Cikel navijanja za palete z velikimi dimenzijami F22 / F23 - Cikel navijanja za zaščitno folijo F29 - Mehki zagon za pritrditev zaščitnega roba F30 - F31 - Cikel navijanja s povečanjem in nastavljivim številom navojov Mehki zagon za zmanjšanje razpok folije na ostrih robovih palet Cikel navijanja z ročno ali motorično obliko vrvice (opcija) Po želji foto celica za temno pakirano blago. Naprava je 3 mesece delovala kot nadomestna naprava pri stranki. Ohišje ima nekaj majhnih prask. Naprava je v ODLIČNEM stanju. Z veseljem vam bomo poslali več slik. Napravo si lahko ogledate v Ludwigsburgu po dogovoru. Na voljo takoj. Cena je od skladišča Ludwigsburg. Montaža in zagon ter usposabljanje zaposlenih je možno po dogovoru. Servisni tehnik je na voljo po vsej Nemčiji in DACH regiji. Rezervni deli so na voljo v Ludwigsburgu. Podpora je zagotovljena v Nemčiji.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height 500 mm – core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Options available: Ramp OPRS film carriage with PreStretch 200% Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optionally 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and cycle end Emergency stop switch, CE compliant Turntable always stops at the same home position Fall protection for film carriage Pushbutton for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON OPERATOR PANEL All functional parameters adjustable via display F00 – Display lock for program change F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speed for up and down independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor wrapping height delay F13–F16 – Film tension for bottom/top wraps & ascent/descent independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) Cjdoz Ipdvspfx Afweri ADJUSTABLE WRAPPING PROGRAMS ON THE OPERATOR PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (up only or down only) F01-3 – Pushbutton for manual functions F10–F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated) F22/F23 – Wrapping cycle for top sheet F29 – Soft start cycle for edge protection application F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via pushbutton Further machines available from stock in Ludwigsburg.