Merilni sistemi nakup rabljenega (278)

Stanje: zelo dobro (rabljeno), Here we offer you an ET SYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10,800 VA The 3260A series is a high-power 300 V AC and DC load in one unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with stepped or square waveforms. Each AC & DC load of the high-power series features its own control and display panel, as well as a 5-status recall/memory function that enables more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) extends the simulation of the test environment. Ijdpfx Adsm Tvyxjksap The integrated GO/NG meter check function provides a quick test result diagnosis for production and QC test throughput. Features - Display of voltage, current, watt, and VA variables. - CC, linear CC, CR, and crest factor mode. - GPIB/RS232 interface and 5-status recall/memory function. - Adjustable power factor (PF): 1, 0.85 ~ -0.85. - Upper/lower threshold capability. - Protection against V, I, W, and ℃. - Dual 4 1/2-digit meter display for voltage, current, watt, and VA. - Suitable for sine, square, and stepped waveforms. Dimensions: Width 600 mm, Height 1506 mm, Depth 600 mm Weight: 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Keyence Model: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel: 278 mm × 134 mm Z travel: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Imaging device: 4-megapixel CMOS, monochrome Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Iedpfx Ader Dby Iekoap Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 μm *1 With image stitching in Z 1.0 μm *1 Measurement accuracy Without image stitching in Z ±2.5 μm *1 With image stitching in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As illustrated!) (Specifications subject to change and errors excepted!) Should you have any questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Here we offer you a Panasonic industrial image processing Imagechecker P400 with vision software. Iedpfjdpizlox Adkjap The package consists of the following components: 2x Imagechecker P400 1x Vision P400 Software 9x ANPC 837 D Double Speed Megapixel Camera and additional accessories – see pictures! New, meaning unused! Type: Panasonic Imagechecker P400 Condition: new / unused Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible via email or fax.

Stanje: zelo dobro (rabljeno), Keyence We offer you a 3D profilometer here. Technical Data: Viewing and Measurement Range: Horizontal (mm): 24.0, 12.0, 8.0, 6.0, 7.6, 3.8, 2.5, 1.9 Iaodpfxskvnthj Adksp Vertical (mm): 18.0, 9.0, 6.0, 4.5, 5.7, 2.9, 1.9, 1.4 Measurement Resolution: 0.1 μm Height Measurement: Height Measurement Range Without Image Stitching (Z): 10 mm / 1 mm With Image Stitching (Z): 50 mm / 30 mm Repeatability (σ)*1 Without Image Stitching (Z): 0.4 µm With Image Stitching (Z): 1.0 µm Width Measurement: Measurement Accuracy*1 Without Image Stitching (Z): ±2.5 μm With Image Stitching (Z): ±4.0 μm Repeatability (σ)*1: 1 μm / 0.5 μm Measurement Accuracy*1: ±5 μm / ±2 μm XY Travel: 184 x 88 mm Z Travel: 73 mm Including control unit VR-5000 + software with licenses Type: VR-5200 + VR-5000 Sale from site!! Condition: fully functional, no signs of wear For further technical details, please refer to the manufacturer. Scope of delivery: (As illustrated) (Technical specifications and information subject to change and errors!) If you have any further questions, we will be happy to answer them by phone.

Stanje: rabljeno, Huda Technology HUD-G809 Fall Shock Test System Systém je vhodný také pro baterie Maximální nosnost: 100 kg Velikost stolu: 500 mm x 600 mm Rozsah maximálního zrychlení při nárazu: - Půlsinusová vlna: 150 - 6000 m/s² Doba trvání pulzu: Iedpexmiilofx Adkoap - Půlsinusová vlna: 0,5 - 30 ms Pokud je doba trvání pulzu menší nebo rovna 3 ms, tolerance špičkového zrychlení je ±20 %; tolerance doby trvání pulzu je ±15 %. Pokud je doba pulzu větší než 3 ms, musí být tolerance tvaru vlny v rozsahu stanoveném normou. Tolerance rychlosti: ±15 % Hydraulická brzda zabraňuje sekundárnímu nárazu Celkové rozměry stolu: 1000 x 750 x 2450 mm Hmotnost: 3600 kg Příkon: 5,5 kVA 380 V ±10 % AC 50 Hz Stav: použitý (Změny a omyly v technických údajích jsou vyhrazeny!) Další dotazy Vám rádi zodpovíme telefonicky.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: P130030201, premer obdelovanca (maks.): 130 mm, Stacionarna optična merilna naprava za natančen nadzor dimenzij in oblike cilindričnih in valjastih komponent. Zasnovana za robustnost in prilagodljivost! TEHNIČNE PODROBNOSTI Območje premerov: 130 mm Natančnost pozicioniranja: 0,01 m Iasdpfx Aexqq Ahsdkep OPREMA Optična merilna glava z vertikalnim vozičkom Pogonski jermen z zobatim pasom in protizračnim mehanizmom

Stanje: generalkompletno obnovljen (rabljeno), Mahr measuring head (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, completely overhauled. The device shows some external signs of use (minor scratches, etc.), but is in perfect technical condition and ready for immediate operation. Isdpfx Aepl T D Ujdkoap Collection or shipping can be arranged at any time. If you have any further questions, please feel free to contact us.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), številka stroja/vozila: F04-02-11-26919, Technical Data Manufacturer: FARO Model: GAGE PLUS Year of manufacture: 2011 Certificate date: 02.03.2020 Revision: 28.1 Serial number: F04-02-11-26919 Accuracy: 5+8L/1000 (µm) The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning available! We will be happy to provide you with a detailed quotation! Iajdpfxoich H Ao Adkjp Note: Our offer is intended exclusively for professional customers. (Subject to change and errors in technical data, specifications, and prices. Sale subject to prior sale!)

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), številka stroja/vozila: F04-02-11-26923, Technical Data Manufacturer: FARO Model: GAGE PLUS Year of manufacture: 2011 Iaedpfx Asich H Redkep Certificate date: 04/02/2021 Revision: 28.1 Serial number: F04-02-11-26923 Accuracy: 5+8L/1000 (µm) The machine can be upgraded with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We are happy to provide you with a detailed quotation! Note: Our offer is addressed exclusively to professional customers! (Subject to changes and errors in the technical data, specifications and prices, and prior sale!)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, skupna širina: 500 mm, skupna dolžina: 500 mm, skupna višina: 1.500 mm, skupna masa: 12 kg, doseg roke: 2.500 mm,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, consisting of: › Stop rail, 2 m long › 2 complete stops › 1 measuring scale, right to left › 1 measuring scale, left to right Iaodefrnpnjpfx Adksp › Mounting screws - The wooden base rail 50 x 45 mm, onto which the stop rail is mounted, is not included in the scope of delivery.

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), Light barrier with transmitter and receiver Ijdpfx Asd Ncuhodkoap Range: 0.3–7.0 m, protective field height: 410 mm, resolution: 14 mm, response time: 10 ms, voltage: 24 V, 400 mA, IP67, operating temperature: -10° to 50°C

Stanje: dober (rabljeno), Photoelectric sensor control unit -10 to +55 °C, 50 ms, 13 W, IP 20 Ijdpfji Arncex Adkjap

Leto izdelave: 2018, stanje: skoraj kot novo (rabljeno), Transmitter + receiver, l= 600, 24 V, 1.7 W, 0.15 m - 24 m, including mounting bracket Iedpfjg Egzhox Adkoap

Stanje: rabljeno, Funkcionalnost: nepreverjeno, 2 x used QUAD-X LASER BAR CODE SCANNERS 2 x used Model 6000 ACCU-SORT SYSTEMS From ongoing production (fully functional) Ijdpshygm Rofx Adkoap

Stanje: pripravljen za uporabo (rabljen), MarSurf M300 MarSurf RD 18 Mahr Surface Roughness Tester with Evaluation Unit The device can only be operated with a cable. Battery operation is non-functional. Bluetooth Measuring Principle: Skid-type contact stylus method Probe: Inductive skid probe Measuring Unit: Selectable Measuring Range: 350 µm Profile Resolution: 8 nm Parameters: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical Scale: Automatic/selectable Horizontal Scale: Depends on cutoff Total Traversing Length according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number n of individual measuring lengths as per ISO/JIS: Selectable 1-5 Traversing Speed: 0.5 mm/s Iedpfx Ajvcly Njdkeap Stylus Tip: 2 µm Measuring Force: approx. 0.7 mN You are welcome to arrange an inspection. We are happy to organize low-cost shipping for you. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. The prerequisite is a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers as well. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the article may occur and are reserved.

Stanje: novo, Leto izdelave: 2024,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 15 h, High-Precision Profile Measuring Device | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. The device delivers accurate measurements, offering extensive freedom of movement and a stable granite base. — Condition • Used, technically inspected • Fully functional • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm • Weight: 220 kg — Iaodpjx Db Stefx Adkjp Profile Measurement (SJ-5760P) • Z1 measurement range: ±25 mm • Resolution: 0.001 µm • Measuring direction: Top / Down • Measurement speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Accuracy • X indication error: ±(0.5 + 0.015L) µm • Z1 indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration measuring conditions • Large travel ranges for diverse component geometries • User-friendly and reliable measurement technology • Suitable for micron-precise form measurements in laboratory and production environments

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, Master jig from the automotive industry, in very good condition. Manufacturer: Paletti (should be compatible with Witte), System: "Precision Profile 40" Isdpfouaz Ryox Adkoap Profiles: - 80x80, lengths: 2x120 mm, 2x240 mm, 760 mm, 920 mm, 2x1080 mm, 1880 mm - 120x120, lengths: 2x160 mm, 2x480 mm, 2x640 mm, 2x800 mm, 3x960 mm, 3x1160 mm, 2x1760 mm, 2x2040 mm These are standard 120x120 profiles, two pieces are "120x120 ribbed".

Stanje: pripravljen za uporabo (rabljen), OGP Smartscope CNC 250 merilna naprava merilni mikroskop video-merilni sistem Pomiki osi (XYZ): 250 mm / 150 mm / 200 mm Dimenzije: cca 740 mm x 640 mm x 810 mm (D x Š x V) Teža: cca 115 kg Ločljivost merilne lestvice: 0,5 µm Dodatne tehnične podatke si oglejte na slikah. Ijdpfx Aexxx Sysdksap Vabimo vas na ogled naprave. Po želji vam lahko organiziramo cenovno ugodno dostavo! Prejmete ustrezen račun. Za tuje stranke je mogoče izdati račun brez DDV, če predložite veljavno ID številko za DDV. Prodaja s pridržkom vmesne prodaje. Obiščite našo spletno trgovino in si oglejte tudi ostale ponudbe. Navedena imena podjetij in blagovne znamke so last njihovih lastnikov in služijo samo za identifikacijo in opis izdelkov. Možna so odstopanja od tehničnih podatkov in napake v opisu artikla, zanje si pridržujemo pravico.

Stanje: pripravljen za uporabo (rabljen), Hommel Tester T1000 merilnik hrapavosti Isdpsxxad Rofx Adkjap Merilno območje: ± 80 µm, ločljivost: 0,01 µm, ± 320 µm, ločljivost: 0,04 µm Vabimo vas na ogled naprave. Po dogovoru lahko za vas organiziramo ugodno dostavo! Prejmete urejen račun. Za tuje stranke lahko izdamo tudi neto račun. Pogoj je veljavna ID za DDV. Pridržujemo si pravico do predhodne prodaje. Obiščite našo trgovino in si oglejte tudi druge naše ponudbe. Navedenih imen podjetij in blagovnih znamk so last njihovih lastnikov in so namenjene le identifikaciji in opisu izdelkov. Možna so odstopanja tehničnih podatkov in pridržujemo si pravico do napak v opisu artikla.

Stanje: pripravljen za uporabo (rabljen), MAHR Digimar 816 CL Height Measuring Instrument Measuring Device: Measuring range: 350 mm Device footprint: 350 mm x 280 mm x 730 mm Iaedpfx Ajvbyl Dsdkop For further technical details, please refer to image no. 2 Measuring Plate: Dimensions: 630 mm x 400 mm x 100 mm (L x W x H) You are welcome to arrange a viewing. We would be happy to organize affordable shipping for you! You will receive a proper invoice. For customers outside Germany, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to see more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. Deviations from technical data or errors in the item description may occur and are subject to change.

Stanje: rabljeno, Used agitator with scale Item number: 10824 Previous application: Pharmaceuticals Type: Floor-standing on 4 castors Isdpeut U Tpjfx Adkoap Material (wetted parts): 1.4301 / AISI 304 Container dimensions: Overall width: 500 mm Overall length: 1500 mm Overall height: 1560 mm Features: Nameplate: yes Agitator type: Beam Shaft length: 355 mm Impeller diameter: Ø180 mm Scale

Stanje: zelo dobro (rabljeno), Modernized GOULDER MIKRON instrument for double-flank gear rolling inspection of spur and helical gears Module range: 0.1 – 2 mm Centre distance range: 25 – 85 mm Vertical carriage stroke for master gear: 40 mm Maximum diameter of measured gear (mounted on arbor): 120 mm Maximum diameter of measured gear (mounted between centers): 80 mm Maximum distance between centers for clamping the measured part: 200 mm Iodpfx Adswkgr Ijkoap Maximum weight of measured gear: 0.5 kg Measuring force setting, manually adjustable: 0 – 8 N Standard master gear arbor diameter: 12.7 mm

Stanje: zelo dobro (rabljeno), Modernized universal GMS32 device for measuring gears using the double-flank rolling method, in standard configuration for spur and helical gears. Module range: 0.1 - 2 mm Center distance range: 16.5 – 90 mm Vertical carriage stroke for master gear: 50 mm Measured gear diameter, max. (mounted on mandrel): 120 mm Measured gear diameter, max. (mounted between centers): 80 mm Measured gear weight, max.: 0.5 kg Iaedpfx Aewkhmtodkep Measurement force adjustment, manually adjustable: 0 - 8 N Measurement accuracy: up to 1 μm Standard master gear mandrel, diameter: 12.7 mm