Strojmetal
Strojmetal iz Kamenice
Ta trgovec še ni dodal opisa podjetja.
gospod Marián Jauernik
Ringhofferova č. 66
251 68 Kamenice
Češka republika
Trenutne ponudbe podobnih prodajalcev
Mali oglas
Hörleinsödt
280 km
Krožna žaga za lahke kovine in aluminij
Elumatec
Elumatec
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1994, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 550 mm, Obseg rezanja okroglega jekla pri 90°: 200 mm, vrsta vhodnega toka: Klimatska naprava, vrtljajska hitrost (min.): 2.800 obr/min, največja hitrost vrtenja: 2.800 obr/min, skupna masa: 1.000 kg, premer rezanja: 200 mm, Zelo malo rabljena aluminijasta krožna žaga z merjenjem dolžine na valjčni progi ZNAMKE ELUMATEC
POGON S KOMPRESORJEM
Guodpfxjzavzvs Aa Ujc
Premer žaginega lista 550 mm
Maksimalna dolžina reza 200 mm pri 90 stopinjah
Ponudba vključuje valjčne proge in merjenje dolžine
Viličar za nakladanje na voljo
Mali oglas
Mielec
666 km
Krožna žaga za kovino s podajalnikom
RohbiRKA72
RohbiRKA72
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 72.250/01, premer žaginega lista: 125 mm, pogonska enota žage: 1.500 W, Krmiljenje PLC: MAGELIiS
Žaga 125 mm
Moč motorja 1,5 kW
Pomik žage 0-20 mm/min
Hitrost rezanja: 15 - 170 m/min (jeklo)
630 - 1885 m/min (neželezne kovine)
Maks. delovno območje: 70x40 mm (jeklo)
Maks. delovno območje: 60x40 mm (neželezne kovine)
Krožno delovno območje: 5 - 70 mm (jeklo)
Krožno delovno območje: 5 - 50 mm (neželezna kovina)
Dolžina pomika 5 - 500 mm
5-9999 (večkratni hod)
Maks. hitrost pomika 500 mm/s
Teža (žaga) približno: 610 kg
Mere d x š x v (žaga) pribl.: 2500 mm x 1000 mm x 2000 mm
Avtomatski podajalnik palic.
OPOMBA
Gusdpfx Ajy U Na Asa Uoc
Če se kupec odloči za to napravo, bo demontažo naprave in nakladanje na zagotovljeno prevozno sredstvo brezplačno opravil prodajalec!
Mali oglas
Velen
867 km
Aluminijasta krožna žaga
METALLKRAFTLMS 400
METALLKRAFTLMS 400
Pokliči
Stanje: rabljeno, Leto izdelave: 2012, Premer žaginega lista 400 mm
Območje reza pri 90 stopinjah: okroglo 130 mm
Območje reza pri 90 stopinjah: kvadratno 110 mm
Gusdpoy N D Nhjfx Aa Uoc
Območje reza pri 90 stopinjah: ploščato 180 x 100 mm
Hitrost vrtenja žaginega lista 3000 vrt/min
Skupna potrebna moč 2,2 kW
Teža stroja pribl. 0,51 t
Dimenzije D x Š x V 3,8 x 1,6 x 1,7 m
Avtomatska krožna žaga za aluminij
- Odtokovni transportni trak z valji 4000 mm z ročnim kolesom, zložljivim omejevalnikom in digitalnim sistemom
- Dovodni transportni trak z valji 3500 mm
- Transportne dimenzije 6,0 m x 2,0 m x 1,6 m
Mali oglas
Beringen
516 km
Krožna žaga za lahke kovine
EMMEGIAutomatic 450
EMMEGIAutomatic 450
Pokliči
Stanje: zelo dobro (rabljeno), Popolnoma avtomatsko
Premer krožne žage: 450 mm
Območje rezanja premera: 150 mm
Dolžina odrezka: 1000 mm
Različen pribor
Gujdpfjy H Dmnex Aa Uec
MARCELS MASCHINEN AG
Mali oglas
Marlenheim
628 km
Krožna žaga za lahke kovine in aluminij
ElumatecSA 142/35
ElumatecSA 142/35
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, Oprema: dokumentacija / priročnik, Tehnične podatke in rezalni diagram lahko prenesete ob strani. 730 mm na hod, omejeno na 3 ponovitve. Žagine liste Ø 500 x 4,4 x 30 mm. Rezanje le pod kotom 90°. Maksimalna dolžina reza pri 3 ponovitvah: 2180 mm.
Gujdoy D Sywopfx Aa Uec
Mali oglas
Hagen
793 km
Krožna žaga za lahke kovine in aluminij
Pressta EiselePROFILMA 502
Pressta EiselePROFILMA 502
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.809 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1559, premer žaginega lista: 550 mm, dolžina podajanja os X: 800 mm, skupna dolžina: 2.400 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, Obseg rezanja okroglega jekla pri 90°: 190 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.850 obr/min, največja višina reza: 150 mm, skupna masa: 1.650 kg, dolžina odseka (min.): 3 mm, dolžina odseka (maks.): 4.000 mm, hitrost žaginega lista: 2.850 obr/min, vhodna napetost: 400 V, pogonska enota žage: 7.500 W, premer rezanja: 270 mm, izvrtina žagine plošče: 40 mm, Fully automatic circular saw PROFILMA 502 + Chip extraction unit MG 3
ST Fully Automatic Circular Saw PROFILMA 502
Gsdpsy Dtpmsfx Aa Uouc
Fully automatic operation, 7.5 kW drive, duty cycle S6, 400 V, 50 Hz, 2850 rpm. Designed for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Siemens S7 control with touch display, including piece counter. Includes CPU 315 and Flexisoft, batch quantity multiplier for bundle processing. Cycle time specification in seconds, chain dimensions. Includes reversing device for section length up to max. 4 m. Automatic shutoff via limit switch at end of material, fault diagnostics. IXON router for VPN connection, see data sheet. Motorised saw blade feed, steplessly adjustable, vertical and horizontal clamping device (from below upwards), on infeed and outfeed sides of the saw head. Cutting width extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, equipped with ball screw and servo motor, including pneumatic horizontal and vertical clamping devices. The profile support area in the feed section is fitted with a lift/lower roller. Minimum remnant piece from 75 mm, depending on profile. Horizontal and vertical clamping pressure reduction with 6 pressure regulators. Timed spray device with fill level monitoring and automatic shutoff. 1-litre lubricant tank. Noise reduction package; machine frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm. Safety guard over the saw head and feed unit. 740 mm roller conveyor with reach-in protection on the infeed side. 450 mm Pertinax table plate with reach-in protection on the outfeed side.
Chip extraction unit MG 3
Dust and chips are collected in a 172-litre metal container, which can be swung out easily for emptying. 2 outlets with 100 mm hose adapters, without extraction hose. 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, negative pressure 30 mbar, fitted with fan snail housing above the extractor. Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation via saw control. No electric cable. Paint finish: RAL 7035 / 9016.
Mali oglas
Hermaringen
449 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 540
Pressta EiseleProfilma 540
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 499 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes:
Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control.
Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously.
Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke.
Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming.
The machine is built for continuous industrial use and has the following physical characteristics:
Weight: approx. 1,000 kg to 1,500 kg (depending on configuration).
Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH).
Hydraulic unit: approx. 900 x 600 x 800 mm.
Gedpfx Aoyyz Txja Usuc
2 machines in stock.
-----
Attractive offer – flexible & worry-free
We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you.
On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about.
📞 Please feel free to contact us for further information or a non-binding quotation.
We provide you with personal and expert advice.
Interim sale, changes and errors excepted!
Mali oglas
Hermaringen
449 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 502 ST-V
Pressta EiseleProfilma 502 ST-V
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles
The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials.
Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order.
Sawing Range & Feed:
500–550 mm saw blades
Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm
Infinitely variable speed regulation
Saw cut from below, motorized feed
Material feed: 3–800 mm, reversible up to 4,000 mm
Ballscrew with servo drive and round-shaft guide
Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)*
Punching Unit:
Vertical hydraulic punching unit (outfeed side) with automatic oil cooling
Punching force: 300 kN
Stroke: 20 mm
Double-stroke cycle time: 2–3 seconds
Punch scrap ejection into frame
Conveyor belt 250 × 800 mm for parts removal
Equipment:
2 pneumatic clamping cylinders (vertical, reduced pressure)
3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control
Minimum quantity lubrication system with 2x 3-liter tank and fill level display
Noise reduction package: hood and internal saw blade guard insulated
Roller conveyor (740 mm) with operator protection on infeed side
Sturdy stationary machine frame, working height: 960 mm
Manually operated safety hood
Saw blade housing located below table surface
Gujdpfoyyz Ebox Aa Usc
Max. Cutting Range:
Profile height: up to 65 mm
Profile width: up to 170 mm
Technical Data:
Dimensions (W × D × H): approx. 311 × 153 × 197 cm
2 machines available
-----
Attractive Offer – Flexible & Worry-Free
We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution.
On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing.
📞 Contact us for more information or a non-binding quote.
Our advice is personal and professional.
Subject to prior sale, changes and errors excepted!
Mali oglas
Hermaringen
449 km
Krožna žaga za lahke kovine in aluminij
Pressta EiseleProfilma 502 ST-HV
Pressta EiseleProfilma 502 ST-HV
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 67 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles
The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers.
Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed.
Sawing range & feed:
500–550 mm saw blades
Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm
Continuously variable speed control
Up-cut sawing, motorized feed
Material feed: 3–800 mm, reversing up to 4,000 mm
Ball screw spindle with servo drive and round shaft guide
Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)*
Punching unit:
Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler
Punching force: 2 × 150 kN
Stroke: ≤ 20 mm
Vertical stroke infinitely adjustable (also suitable for embossing)
Horizontal punching cylinder can be switched off separately
Double-stroke cycle time: 2x 2–3 seconds
Punch waste is discharged laterally from the machine frame
Conveyor belt 250 × 800 mm for parts removal
Equipment:
2 pneumatic clamping cylinders (vertical, pressure-reduced)
3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control
Minimum quantity spray unit with 2x 3-litre tanks and level indicators
Noise protection package: hood and saw blade guard with internal insulation
Roller conveyor (740 mm) with reach-in protection on infeed side
Sturdy stationary frame, working height: 960 mm
Manually opening safety hood
Saw blade housing below the tabletop
Max. cutting range:
Profile height: up to 65 mm
Profile width: up to 135 mm
Technical data:
Dimensions (W × D × H): approx. 311 × 153 × 197 cm
Gedpfoyyzxhsx Aa Usuc
A total of 2 units available.
-----
Attractive offer – flexible & worry-free
We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution.
On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing.
📞 Please contact us for further information or a non-binding offer.
We provide personal and competent advice.
Subject to prior sale, changes and errors excepted!
Mali oglas
Jonschwil
474 km
Krožna žaga za lahke kovine in aluminij
BIMAXTA 91P
BIMAXTA 91P
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2012, premer žaginega lista: 250 mm, dolžina podajanja os X: 250 mm, skupna dolžina: 1.400 mm, skupna širina: 1.200 mm, skupna višina: 2.400 mm, vrtljajska hitrost (min.): 1.400 obr/min, največja hitrost vrtenja: 5.360 obr/min, skupna masa: 450 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Avtomatska precizna žaga za aluminij +/- 0,02 mm, letnik 2012, premer žaginega lista 250 mm, zmogljivost rezanja Ø 3-65 mm, motor 2,5 kW, dolžina podajanja 250 mm, SIEMENS Simatic HMI, z visokimi obrati, minimalno olje/zrak mazanje, posebne čeljusti 2-30 mm za enojno ali dvojno vpenjanje, dovajalna proga dolžine 3 m, nastavljiva po višini, LED svetilka za stroj, opozorilna luč na stroju, 10 rezervnih žaginih listov, navodila za uporabo.
Gsdpfx Aasyyl Hpo Usuc
Mali oglas
Dinkelsbühl
476 km
Krožna žaga samodejna za aluminij
Pressta-EiseleProfilma 501 SE
Pressta-EiseleProfilma 501 SE
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, commande entièrement automatique
entraînement 7,5 kW, S6, 400 V, 50 Hz, 2850 tr/min
Gjdpfxjyvtyvs Aa Usuc
pour l’utilisation de lames de scie D 550 mm
plage de coupe 270x140 mm (largeur x hauteur), D 185 mm
largeur de profil max. 270 mm
commande avec écran
avec compteur de pièces
avec dispositif de réversibilité pour une longueur de coupe max. 3000 mm
arrêt automatique via interrupteur de fin de course en fin de matériau
avancement de lame de scie hydropneumatique, réglable en continu, de bas en haut
système de serrage vertical et horizontal, côté alimentation et évacuation de la tête de scie
dispositif pneumatique de pulvérisation doseuse
élargissement de l’écartement de coupe des deux côtés de la lame
dispositif d’alimentation électronique 3–600 mm de longueur d’avance,
avec vis à billes et servomoteur,
avec dispositif de serrage pneumatique horizontal et vertical,
longueur de chute à partir de 75 mm, selon le profil
2 embouts d’aspiration D 100 mm
capot de sécurité sur la tête de scie et l’unité d’avance
Une installation d’aspiration adaptée peut être proposée en option !
Mali oglas
Velen
867 km
Aluminijasta krožna žaga
BERG & SCHMIDVELOX 350 VA MPS
BERG & SCHMIDVELOX 350 VA MPS
Pokliči
Stanje: rabljeno, Leto izdelave: 2009, Premer žaginega lista 350 mm
Območje reza pri 90 stopinjah: okroglo 120 mm
Gedpfx Aajyrhu So Uouc
Območje reza pri 90 stopinjah: kvadratno 110 mm
Območje reza pri 90 stopinjah: ploščato 200x88 mm
Območje reza pri 45 stopinjah: okroglo 115 mm
Območje reza pri 45 stopinjah: kvadratno 110 mm
Območje reza pri 45 stopinjah: pravokotno 150x80 mm
Skupna zahteva za moč 1,5/1,8 kW
Teža stroja pribl. 0,59 t
Dimenzije D x Š x V 1,9 x 1,4 x 1,8 m
Hidropnevmatski polavtomat
· Nagib levo/desno
· Glava za poševne reze do 45° (nagibna) levo/desno
· Pnevmatična dvojna vpenjalna naprava
· Pnevmatična vertikalna vpenjalna naprava
· Integrirana naprava za pršenje hladilne tekočine
MPS-krmiljenje:
· Shranjevanje začetka/konce reza
· Prikaz porabe toka, število kosov, čas reza…
· Nastavljivo hlajenje z vodo
· Regulator pritiska reza
Mali oglas
Dinkelsbühl
476 km
Avtomatska krožna žaga za aluminijaste profile
Pressta-EiseleProfilma 510 E-SA
Pressta-EiseleProfilma 510 E-SA
Pokliči
Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit
Suitable for a wide range of applications, especially in the photovoltaic and automotive industries.
Loading Unit:
Gjdpfx Asxvbvvea Usuc
Horizontal loading magazine, model HLM
4-strand timing belt conveyor
6 compartments, each 285mm wide, for profile storage;
max. material height as per saw cutting range, round material max. diameter 130 mm
3 sliding rails between the belts as additional support
Profile length min. 2,700 mm, max. 6,500 mm
Saw:
Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA
Saw blade diameter max. 500 mm
Continuously adjustable speed
Hydropneumatic saw blade feed, continuously adjustable from rear to front
Control: Siemens S7-300 with touchscreen
Reversing device with 5-fold stroke up to max. 5,000 mm
Electric material feed 3 – 1,000 mm (single stroke)
Cutting slot extension on both sides
Pneumatic unloading pusher
Waste flap after the saw for offcuts / remnants
Cut-off length: profile-dependent, from 8 mm
Menzel minimum quantity lubrication
Clamping pressure regulation
2 extraction nozzles for chip extraction
Unloading:
Table area: 1,500 mm x 2,500 mm
Pneumatic cross pusher
Mali oglas
Emmendingen
584 km
Popolnoma avtomatska krožna žaga
EiseleVA-L-PV(CNC)
EiseleVA-L-PV(CNC)
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, General overhaul 2025
Saw blade: 350 - 400 mm
Motor power: 6.5 / 8.5 kW
Speed: 1500/3000 rpm
Cutting speed: 1650 – 3800 m/min
Saw height adjustment: electronic
Working range, square max.: 120x120 mm
Guedpfx Ajxpqzhea Uoc
Working range, flat max.: 200x100 mm
Working range, flat (extra wide) max.: 250x70 mm
Working range, round max.: 130 mm
Saw feed rate: 0 – 40 mm/s, infinitely adjustable
Cut-off length: 5-600 mm (up to 9999 mm with multiple strokes)
Feed speed max.: 500 mm/s
Weight approx.: 1300 kg
Dimensions (LxWxH): 1800mm x 1300mm x 1950mm
The machine will undergo a complete general overhaul at our facility and will be in like-new condition afterwards. Among other things, the following components will be renewed:
- Conversion to PLC control
- Conversion to Siemens HMI operator interface
- Conversion to ball screw drive with servo control
- New electrical components
- New pneumatic lines
- New pneumatic components
- Retrofitting to valve terminal
- Optimization of extraction performance
- New minimum-quantity lubrication system
- Replacement of general wear parts
- Overhaul of the enclosure
The machine is additionally equipped with:
- Soundproof enclosure
- Kerf widening system (for high-quality cut surfaces without return marks)
Optional equipment:
- Mass clamping system for parallel sawing of multiple workpieces
- Flat magazine for automatic feeding of raw materials up to 6 m in length
- 7.5 kW motor
- 12 kW motor
- Delivery and installation at your location
- Training of your staff
Mali oglas
Velen
867 km
Aluminijasta krožna žaga
IMETAF-E-CEB
IMETAF-E-CEB
Pokliči
Stanje: rabljeno, Leto izdelave: 1997, Premer žaginega lista 350 mm
Obseg reza pri 90 stopinjah: okroglo 120 mm
Obseg reza pri 90 stopinjah: kvadratno 110 mm
Obseg reza pri 90 stopinjah: ploščato 200x88 mm
Obseg reza pri 45 stopinjah: okroglo 115 mm
Obseg reza pri 45 stopinjah: kvadratno 110 mm
Obseg reza pri 45 stopinjah: ploščato 150x80 mm
Potreba po skupni moči 1,5/1,8 kW
Teža stroja pribl. 0,59 t
Dimenzije D x Š x V 1,9 x 1,4 x 1,8 m
Hidropnevmatski polavtomat
· Poševni rezi levo/desno
· Glava za poševne reze do 45° (šifter) levo/desno
· Enota za pomik materiala z vpenjalcem
· Integrirana naprava za brizganje hladilne tekočine
· MPS krmiljenje:
· Shranjevanje začetka/konce reza
· Prikaz porabe toka, števila kosov, časa reza...
· Nastavljivo vodno hlajenje
Guedexf I U Dopfx Aa Usc
· Regulator pritiska reza
Mali oglas
Ahaus
879 km
Aluminijasta krožna žaga
MEP - VollautomatCOBRA 352 NC 5.0
MEP - VollautomatCOBRA 352 NC 5.0
Pokliči
Stanje: novo, Saw blade diameter: 350 x 32 mm
Cutting capacity at 90 degrees: round 120 mm
Cutting capacity at 90 degrees: square 105 x 105 mm
Cutting capacity at 90 degrees: flat 180 x 70 mm
Cutting capacity at 45 degrees: round 120 / 110 mm
Cutting capacity at 45 degrees: square 100x100 / 95x95 mm
Cutting capacity at 45 degrees: flat 135 x 60 mm
Speed: 1,700 / 3,400 rpm
Control system: MEP CNC
Total power requirement: 2.6 / 3.5 kW
Machine weight: approx. 605 kg
Dimensions (L x W x H): 2210 x 1680 x 2150 mm
Features:
- Fully automatic CNC high-performance circular saw
* for mitre cuts from 45° right to 45° left
* for cutting aluminium and light metal alloys
Gusdpfexaa Uxex Aa Usc
- MEP microprocessor control
* Windows "CE" based control system
* user-friendly interface
* up to 100 cutting programs storable
* user interface with 7” touch screen display & mechanical buttons
* adjustable/swing-mounted operation panel
* display and logging of alarms and error messages
* positioning of saw head and movement of feeder via joystick
* automatic detection of cutting start position
- Material feed with stepper motor and ball screw
* with 600 mm stroke
* can be repeated for any length cuts
- Manual safety hood
- Mechanical stops at -45°, 0°, +45°
* allow for quick saw head positioning
- Pneumatic vice system
* 2x pneumatic frontal vices
* including vertical vice
- Heavy cast iron construction ensures vibration-free operation & maximum precision
- Saw head can be tilted up to 45°
- 2 saw blade speeds
- Base frame with lockable door
- Coolant system (emulsion oil lubrication)
- Machine base with forklift pockets
- Comprehensive operating and maintenance manuals
Mali oglas
Nemčija
650 km
Krožna žaga za lahke kovine / aluminij
PRESSTA-EISELEProfilma 510
PRESSTA-EISELEProfilma 510
Pokliči
Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE
Model: Profilma 510 / Year of manufacture: 09/2008
Description:
* High-performance sawing machine with fully automatic operation
* Very high cutting precision
* Short cycle times
* Low-burr sawing
* High reliability
* Low maintenance requirements
Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm.
Gjdsw D T Uispfx Aa Ujuc
The saw can be viewed and tested under power by appointment.
Previous use: Cutting of corner connectors.
Very well-maintained, ready-to-operate used condition.
Technical data:
- Saw motor: 7.5 kW, S6
- Speed: 2,000 - 3,500 rpm
- Cutting speed: up to 92 m/s
- Material feed length: up to 1,000 mm / 5-fold reversal possible
- Cut length: from 8 mm depending on profile
- Remaining piece length: from 90 mm depending on cut length
- Working pressure: 6 - 8 bar
- Power supply: Standard: 400 V, 50 Hz
- Weight: 1,750 kg
- Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm
Equipment:
- Siemens S7 control panel
- Fully automatic bar feeder
- Roller conveyors
- Extraction unit
- Chip bunker
- Various accessories
- CE marking
No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.
Mali oglas
Kanal
107 km
Krožna žaga za lahke kovine in aluminij
MEPCOBRA 352 NC 5.0
MEPCOBRA 352 NC 5.0
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Rabljena avtomatska krožna žaga za aluminij MEP Cobra 352 nc 5.0
Letnik 2017
Dimenzije lista: 350x32x3,4mm
Rezalna hitrost list: 1700/3400 rpm
Kot reza : od -45°do +45°
Guedpfx Aewu Tz Rea Uec
Kapaciteta reza: pri 0°: okroglo: 120mm, kvadrat: 105mm , pravokotnik 180x70mm
Zaslon na dotik
Teža stroja: 605kg
Mali oglas
Steinau an der Straße
621 km
Krožna žaga za lahke kovine / aluminij
TRONZADORASGAA-350-90°
TRONZADORASGAA-350-90°
Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, stock machine year 2023, condition: new
List price + Option Minimal Lubrication System LUBETOOL: €15,370
STOCK MACHINE -- Fully automatic aluminum circular saw for 90° cuts
Easy and safe operation with excellent cutting performance. This machine can only perform 90° cuts!
Technical data:
● Cutting range:
90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm
● Drive power: 1.9 kW / 400 V / 50 Hz
● Speed: 3000 rpm
● Feed: single stroke 300 mm (double stroke up to 600 mm)
● Max. cutting height: 100 mm
Guedpfxjvurgyj Aa Uec
● Blade dimensions: 350 x 32 mm
Standard equipment:
● Machine for 90° cuts, featuring a high-performance drive motor
● Clearly laid out, large control panel
● Adjustable cut length from 5 to 300 mm via handwheel and counter
● Main clamping vice with 3 pneumatic cylinders: 1 horizontal, 2 vertical!
● Feed vice with horizontal and vertical pneumatic clamping cylinders!
● Large protective hood covering the entire working area, pneumatically lifted
● Adjustable cutting and feed speed
● Air gun for cleaning the machine
● Connections for extraction unit
Optional, mounted on stock machine:
● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation
Mali oglas
Пловдив
897 km
Avtomatska žaga za rezanje aluminija/PVC
Tronzadoras MGGAA-350-90+CNC+TR12
Tronzadoras MGGAA-350-90+CNC+TR12
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G90230201, premer žaginega lista: 350 mm, skupna dolžina: 1.500 mm, skupna širina: 970 mm, skupna višina: 1.400 mm, največja višina reza: 100 mm, skupna masa: 350 kg, hitrost žaginega lista: 3.000 obr/min, vhodna napetost: 400 V, Автоматична CNC управляема циркулярна машина за рязане и пробиване / нарязване на резби на алуминий.
Tronzadoras MG - GAA-350-90+CNC+TR12
• Автоматичен цикъл.
• Подавател с ход на винтова шпилка, 700 mm.
Guedpfxevl Eahj Aa Uec
• OMRON контролер.
• 10 програми с по 30 реда.
• Памет за 20 изделия.
• Аварийно спиране.
• Регулируеми скорости на подаване и рязане.
• Автоматично настройване на дължината на рязане с многократни подавания.
• Рязане под 90º.
• Автоматично въздушно-маслено охлаждане.
• Полуавтоматичен или напълно автоматичен режим на работа.
Машината е инспектирана, сервизирана и готова за работа.
Mali oglas
Weißenborn/Erzgebirge
540 km
Krožna žaga za lahke kovine / aluminij
Tronzadoras MGGAA-600 - CNC
Tronzadoras MGGAA-600 - CNC
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 600 mm, Obseg rezanja okroglega jekla pri 90°: 220 mm, For sale:
1 used CNC aluminum circular saw automatic including extraction unit
Manufacturer: Tronzadoras MG
Model: GAA-600 - CNC
Year: 2015
TECHNICAL DATA
• Cutting range round: 220 mm, rectangle: 300 x 90 mm, square: 175 mm
• Drive power: 4.1 kW / 400 V / 50 Hz
• Speed: 3,000 rpm
• Cutting speed: 55 m/sec
• Blade dimensions: 600 x 50 mm
• Max. cutting height: 220 mm
• Dimensions: 2,020 x 1,510 x 975 mm
• Weight: 650 kg
The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit.
The saw can be inspected at our warehouse in 09599 Freiberg.
Guodpfxouyyhae Aa Ujc
Mali oglas
Emmendingen
584 km
Avtomatska žaga za jeklo
KastoWAC 70/ Wa C7
KastoWAC 70/ Wa C7
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Overhauled: 2024
Saw blade: 250–285 mm
Motor power: 5.5 kW
Cutting speed: 35–160 m/min
Working area, square max.: 15–60 mm
Working area, round max.: 15–70 mm
Saw feed: 2–100 mm/s, steplessly adjustable
Cut length: 5–250 mm
Material feed speed: max. 1000 mm/s
Weight (saw): approx. 1,500 kg
(magazine): approx. 800 kg
Dimensions LxWxH (saw): approx. 1100 mm x 1600 mm x 2300 mm
(magazine): approx. 7500 mm x 1400 mm x 1600 mm
This machine, thanks to its features and design, is suitable for mass cutting of steel and is the predecessor of the KASTOwa C7 and KASTOspeed C9.
Following a general overhaul (retrofit), the system will be in like-new condition, guaranteed by our company.
The machine will be fully refurbished in our workshop according to customer specifications. The following will be renewed or replaced, among others:
- New Siemens S7 PLC control
- Conversion to Siemens HMI
- Conversion to fully electronic cut length selection (optional)
- New electrical components
- New pneumatic lines
- Overhaul or replacement of all pneumatic components
- New hydraulic lines
- Overhaul or replacement of all hydraulic components
- Overhaul of Menzel minimum quantity lubrication system
- Replacement of common wear parts
- Overhaul of loading magazine
- Enhancement of the safety concept
Additional equipment:
- Drop-off magazine for 6 m bars
- Hydraulic material feed unit
Warranty:
Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and consumable/wear parts are excluded from warranty.
Gsdeuizlcopfx Aa Ujuc
Options:
- Conversion to chip extraction
- Conversion to manual trapezoidal spindle stop 0–800 mm
- Conversion to fully electronic ball screw stop 0–800 mm
- Conversion of main saw drive to 18 kW
- Delivery and installation at your site
- Operator training
Mali oglas
Emmendingen
584 km
Stroj za žaganje aluminija/jekla
RohbiRKA78
RohbiRKA78
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024,
Mali oglas
Emmendingen
584 km
Jeklena avtomatska žaga
KaltenbachRKS 451 NA1000
KaltenbachRKS 451 NA1000
Pokliči
Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024,
Mali oglas
Emmendingen
584 km
Avtomatska žaga za jeklo
KaltenbachKKS 401 NA1000
KaltenbachKKS 401 NA1000
Pokliči
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024,





























































































































































































































