Druge brizgalne stroje nakup rabljenega (120)

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, clamping force: 600kN, screw diameter: 25mm, tie bar spacing: 370mm, max. injection volume: 49cm³, operating hours: 55,682h. Documentation available. On-site inspection possible. Iedpfx Afot E Tq Rj Toal

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Iaedpfeuiykdox Af Tol

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Five identical Arburg injection moulding machines are available. Clamping force: 800 kN, tie bar spacing: 420 mm x 420 mm, installation height: 250 mm, platen distance: 700 mm, nozzle diameter: 45 mm, weight: approx. 3,800 kg, control system: Selogica 3.020. All machines are supplied with temperature control unit and conveyor belt. Documentation is available. The machines are in storage. On-site inspection is possible. Iaedsviv Dfepfx Af Tjl

Leto izdelave: 2022, Stanje: pripravljen za uporabo (rabljen), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen system. Plasticising capacity: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1,700t, controller: MC6. 2) Industrial robot KUKA IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3,100mm, repeatability: +/-0.05mm, controller: KR C5. Documentation available. On-site inspection possible. Iedjvpvlcspfx Af Tsal

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), A total of four Engel injection moulding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999. This machine is a defective unit used for spare parts. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation is available. An on-site inspection is possible. Individual sale is possible. Iasdpfev Extzjx Af Tel

Stanje: pripravljen za uporabo (rabljen), Clamping force: 350 kN, tie bar spacing: 280 mm/280 mm, platen dimensions X/Y: 410 mm/410 mm, min. mould installation height: 180 mm, max. opening stroke: 350 mm, max. platen distance: 530 mm, screw diameter: 22 mm, shot volume: 47.5 cm³, shot weight (PS): 41 g, injection pressure: 2440 bar, control system: NC4, heating capacity: 6.3 kW. Machine dimensions X/Y/Z: approx. 3100 mm/1100 mm/1600 mm, weight: approx. 1800 kg. Inspection on site is possible. Isdewaa H Dspfx Af Toal

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), An injection moulding machine Ferromatik Milacron without auxiliary or peripheral equipment is available. Clamping force: 1000 kN, injection pressure: 2000 bar, shot volume: 254 cm³, heating capacity: 14.8 kW, tie bar spacing: 508 mm, machine weight: approx. 6750 kg, operating hours: approx. 33,649 h. An on-site inspection is possible. Isdpfx Afowut Hto Tsal

Stanje: rabljeno, Leto izdelave: 2006, An injection moulding machine Demag Ergotech including Wittmann robot and machine enclosure is available. 1) Injection moulding machine Demag Ergotech 50/355-200, year of manufacture: 2006, tie bar spacing X/Y: 355mm/355mm, minimum mould installation height: 210mm, maximum platen distance: 610mm, screw diameter: 25mm, shot weight: 55g, injection pressure: 2752bar, clamping force: 500kN, core pull: 1, weight: approx. 3100kg, control system: CDIAS. 2) Handling robot Wittmann W721, year of manufacture: 2006, stroke X/Y/Z: -550mm/-1200mm/-2000mm, weight: approx. 250kg. 3) Safety enclosure. Documentation available. Inspection on site is possible. Iaodjwvadnopfx Af Tel

Leto izdelave: 1991, Stanje: pripravljen za uporabo (rabljen), Clamping force: 12,000 kN, Opening force: Opening stroke: Clamping speed: 1030 mm/s, max. mold weight: 22.5 t, max. platen dimensions: 1900 x 1950 mm, tie bar diameter: 220 mm, ejection force: 130 kN, screw diameter: 133 mm, injection pressure: 1,445 bar, width: 3,500 mm, length: 14,745 mm, height: 2,740 mm. Comes with documentation. On-site inspection is possible. Iaodpfxowbpzaj Af Tel

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Clamping force: 250 kN, tie bar spacing: 270 mm/270 mm, platen dimensions X/Y: 380 mm/380 mm, screw diameter: 25 mm, injection volume: 49 cm³, shot weight (PS): 45 g, injection pressure: 2000 bar, cores: 2+5, heating zones: 12. Pump hours: 2,388 h, automatic operation: 1,600 h. Includes Multilift H with B-axis, cleanroom module. Iodpetyax Eefx Af Toal

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 200mm/550mm, opening stroke: 350mm, clamping force: 350kN, screw diameter: 20mm, tie bar distance: 270mm, max. injection volume: 31cm³, operating hours: 61,737h. Documentation available. On-site inspection possible. Isdpfet E Tq Dex Af Tjal

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1000kN, screw diameter: 35mm, tie bar spacing: 420mm, max. injection volume: 144cm³, operating hours: 54,164h. Documentation available. An on-site inspection is possible. Iasdpet E Trbsfx Af Tel

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Flange diameter: 160 mm, clamping force: 1600 kN, tie bar distance: 520 mm/520 mm, minimum mould diameter: 350 mm, minimum mould installation height: 300 mm, opening stroke: 650 mm, platen distance: 950 mm, ejector stroke: 150 mm. Screw diameter: 45 mm, injection pressure: 2336 bar, stroke volume: 318 cm³, nozzle radius: 15 mm, shot volume: 134 cm³, shot weight: 289 g. Machine dimensions (L/W/H): approx. 4900 mm/1600 mm/2200 mm, weight: approx. 7400 kg, operating hours: approx. 71,187 h. The machine has an unknown defect. Documentation is available. On-site inspection is possible. Iedpfjuabq Tjx Af Teal

Leto izdelave: 1997, Stanje: pripravljen za uporabo (rabljen), Clamping force: 400 kN, heating capacity: 5.5 kW, connected load: 20.5 kW, weight: 4.7 t, operating hours: 18,287 h, on-site inspection possible. Iedporc Hibsfx Af Toal

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Max. clamping force: 800 kN, heating capacity: 9.4 kW, pump motor power: 1 x 18.5 kW, connected load: 27.9 kW, weight: 7.4 t. An on-site inspection is possible. Iodpfx Afsum U S Eo Toal

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. Iedpfxjugmx Ae Af Toal 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Clamping force: 62.5 kN, opening stroke: 110 mm, ejector force: 6.4 kN, ejector stroke: 60 mm, platen distance: 119 mm–229 mm, fixed platen (tool carrier): 247 mm/172 mm, moving platen (tool carrier): 128 mm/155 mm, screw diameter: 12 mm, injection volume: 6.8 cm³, injection pressure: 1,360 bar. Machine dimensions (L/W/H): approx. 700 mm/1,200 mm/1,650 mm, weight: approx. 350 kg. Documentation available. On-site inspection possible. Iasdpfewyxa Nox Af Tsl

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Installation height min./max.: 250mm/750mm, Opening stroke: 500mm, Clamping force: 1500kN, Screw diameter: 40mm, Tie bar spacing: 420mm, Injection volume: 182cm³, Operating hours: 98,234h. Documentation available. An on-site inspection is possible. Iajdpfx Ast E Trhjf Tsl

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Clamping force: 2000 kN, screw diameter: 40 mm, nozzle diameter: 2.5 mm, effective screw length: 20 mm, maximum shot volume: 201 cm³, maximum shot weight (PS): 184 g. Hours in automatic operation: 20,700 h, pump hours: 27,800 h, cycles: 3.4 million. Documentation available. An on-site inspection is possible. Ijdpfx Asr N Rh Hjf Tsal

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), A Boy injection moulding machine is available. Clamping force: 100 kN, tie bar distance (diagonal): 205 mm, max. platen opening: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions L/W/H: approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation available. Inspection on site possible. Iaedpfx Ajv Ext Iof Tsl

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Two Battenfeld injection moulding machines are available. 1) Battenfeld BA 1600, year of manufacture: 2001, clamping force: 1600 kN, tie bar spacing: 520mm x 520mm, minimum/maximum mould height: 225mm/550mm, opening stroke: 480mm, centring diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of manufacture: 1995, clamping force: 500kN, tie bar spacing: 320mm x 320mm, platen dimensions X/Y: 490mm x 490mm, minimum/maximum mould height: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484 bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder issues with the screw and the injection unit backward/forward movement. Documentation is available. Inspection on site is possible. Machines can be sold separately. Ijdjwydg Ujpfx Af Toal

Leto izdelave: 2008, Stanje: pripravljen za uporabo (rabljen), Clamping force: 1100 kN, screw diameter: 35 mm, shot weight: 140 g, injection volume: 154 cm³, injection pressure: 2429 bar, max. cylinder temperature: 375°C, weight: approx. 8,000 kg, control system: MC 5 3.0, operating hours: 25,271 h, pump hours: 29,098 h. Included is a linear robot KM LRX 150, travel path X/Y/Z: 900 mm/1200 mm/3000 mm, payload: 15 kg. Documentation available. Inspection on site possible. Iedswz N Tvopfx Af Teal

Leto izdelave: 1998, obratovalne ure: 62.144 h, Stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, tie bar spacing: 520 mm/520 mm, platen dimensions X/Y: 715 mm/715 mm, minimum mould installation height: 250 mm, maximum opening stroke: 650 mm, ejector stroke: 225 mm, ejector force: 66 kN. Screw diameter: 55 mm, shot weight: 240 g, injection pressure: 2500 bar, stroke volume: 286 cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600 mm/1700 mm, weight: approx. 7000 kg, operating hours: approx. 62,144 h. Documentation available. An on-site inspection is possible. Expected to be available from June 2025. Isdpfx Afsv Ifwxo Teal

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), A selection of used injection moulding machines is available. 1) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 2) Demag Concept 80/370-200, clamping force: 80t, screw diameter: 30mm, year of manufacture: 2006. 3) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2003, operating hours: approx. 100,000h. 4) Demag ET 150/500-610h/120v multi, clamping force: 150t, screw diameter: 50mm/25mm, year of manufacture: 2006, operating hours: approx. 105,000h. 5) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 6) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 7) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 8) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 67,000h. 9) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2007, operating hours: approx. 98,000h. 10) Engel VC 740/150 electric, clamping force: 150t, screw diameter: 50mm, year of manufacture: 2006, operating hours: approx. 103,000h. 11) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2000. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2001. 12) Demag ET 200-560-840 concept, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2002. 13) Engel VC 940/200 electric, clamping force: 200t, screw diameter: 60mm, year of manufacture: 2006, operating hours: approx. 107,000h. Documentation available. On-site inspection is possible. Sale of individual machines possible. Iedpfx Afjv R Ew Ds Tsal

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Injection pressure: 2100 bar, injection volume: 595 cm³, shot weight: 565 g, injection speed: 299 cm³/s. Clamping force: 250 t, holding force: 275 t, platen dimensions X/Y: 920 mm / 920 mm, opening stroke: 575 mm, mould height min./max.: 200 mm / 685 mm, tie bar spacing: 585 mm, ejector stroke: 175 mm, ejector travel: 180 mm, centering: 160 mm, operating hours: 62,149 h. Documentation available. On-site inspection possible. Iaedev Ip Rvopfx Af Tjl