Krožne brusilke z dolžino brušenja 0–599 mm nakup rabljenega (118)

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: Dwodpfx Aasd Amifo Hef - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen,

Stanje: pripravljen za uporabo (rabljen), Centre height: 130 mm Centre distance: 500 mm Grinding wheel dimensions: 127/300 x 40 mm Grinding wheel speeds: 2 rpm Electrical connection: 380 V, approx. 4 kW Space requirement: 1730 x 1100 x 1550 mm Dwedpfxsvf Dmtj Aa Hof Weight: approx. 1,750 kg

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 9.999 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 120231, Univerzalni / zunanji brusilni stroj SCHAUDT / Mikrosa PS 51 N 600 Tehnični podatki – Schaudt / Mikrosa PS 51 N 600 Tip stroja: Univerzalni/zunanji brusilni stroj Leto izdelave: 2002 Krmiljenje: Siemens 840D Dolžina brušenja (med konicami): 600 mm Višina med konicami / višina nad posteljo: 180 mm Maksimalni premer brušenja nad posteljo: približno 300–360 mm Dwedpfexdb R Njx Aa Hef Maks. teža obdelovanca (med konicami): približno 150–200 kg, odvisno od izvedbe Moč brusilnega vretena: približno 22 kW Širina brusilnega koluta npr. 220 mm pri Premium verzijah; premer glede na opremo približno 400–500 mm Hitrost / obodna hitrost brusilnega koluta, pri nekaterih verzijah približno 45 m/s; glede na opremo variabilno Skupna teža približno 10 t

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: xxxx, Ref. No. 24265 Technical data: Dwodpfxstx Ubre Aa Hef - Shaft mount diameter: 35 mm - Usable shaft length: 90 mm - Drive speed: 1450 rpm - Drive: 400 V / 4.4 kW - Space requirement approx.: W 1300 x H 2500 x D 800 mm - Weight approx.: 200 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, višina središča: 130 mm, dolžina brušenja: 575 mm, premer brušenja: 125 mm, vrtilni razpon: −90 °, izvrtina vretena: 38 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum grinding diameter with steady rests: 125 mm Maximum grinding diameter without steady rests: 250 mm Maximum grinding length: 575 mm Centre height: 130 mm Spindle speed (grinding spindle): 1,150/1,460 rpm (2 speeds) Workpiece Spindle Spindle bore: 38 mm Head swivel range: -90° Workpiece weight: 75 kg Table Table swivel range: ±12° (total 24°) Table longitudinal travel: 4 - 710 mm Grinding Wheels Maximum grinding wheel diameter: 500 mm Maximum grinding wheel width: 60 mm Grinding wheel bore: 127 mm Mounting diameter: 127 mm Flange diameter: 190 mm Taper diameter: 60 mm MACHINE DETAILS Footprint: 3.28 x 3.0 x 1.5 m Weight: 2,700 kg Main drive: AEG AM 134 MV4 W1 Workpiece spindle drive: AEG AM 90 S6 W1 Coolant pump: AEG TP 44/270 Voltage: 220/380 V Dedpfxjvt S Dij Aa Hewf Frequency: 50 Hz EQUIPMENT - Grinding spindle headstock with fixed wheel - Workpiece spindle headstock for internal and external grinding - Coolant pump and lubrication oil pump - V-belt drive - Extensive documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, številka stroja/vozila: 06.E.400.020, Country of manufacture: CH Voltage: 3x400V - 24(V – DC) Dimensions: 237x206x195 cm Dsdpfx Aoiqt S Aea Howf Net weight: 5500 kg TECHNICAL DATA Control system: Fanuc 21i-MB 3 Axes U: Axis of the working grinding wheel W: Workpiece-to-workpiece / dressing axis X: Axis of the dressing wheel Working range Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working range Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Max. external diameter: Ø 400 mm Internal diameter: Ø 203.2 mm Max. speed: 50 m/sec. Drive power: 11 kW Optional drive power: 29 kW Regulating wheel Max. external diameter: Ø 250 mm Internal diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Tilt angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2,060 mm Width (door open): 2,370 mm (3,120 mm) Height (safety cover open): 1,950 mm (2,100 mm) Weight: 5,500 kg Compressed air Max. pressure: 16 bar Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40° C Errors and omissions excepted; these technical data are provided without obligation.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen,

Leto izdelave: 1975, Stanje: rabljeno, številka stroja/vozila: 27749, Centre height: Grinding diameter 250 mm Centre distance: Grinding length 575 mm Grinding wheel dimensions: 500 x 60 x 127 mm Electrical connection: 380 V, approx. 9 kVA Dwedpfx Asz Hc Isa Hjf Required space: 2650 x 2600 x 2240 mm Weight: 3400 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj Danobat popolnoma obnovljen. Razstavljen, prilagojen, prebarvan in pripravljen za uporabo. Vključuje različne dodatke. Video na voljo za zainteresirane. Dwedpsxwln Sjfx Aa Hof

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 017003, Offer 13380 Polishing and Buffing Machine with Separate Dust Extraction Technical Specifications: - Polishing wheel diameter up to approx. 250 mm - Polishing wheel speed 1450 rpm - Drive motor 400 V / 1.1 kW - Space requirement approx. W 1300 x H 1100 x D 400 mm - Weight approx. 100 kg - Separate motorized dust extraction - Paper filter Dwedpfx Aaek Ac Azs Hof - Space requirement approx. W 1300 x H 1100 x D 2200 mm - Weight approx. 100 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Working Area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis travel: 350 mm Table adjustment: 8° X-axis travel: 190 mm Grinding Spindle Max. grinding wheel diameter: 500 mm Max. grinding wheel width: 80 mm Grinding wheel bore: 127 (203) mm Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Protective hood for grinding wheel: D500 x 80 mm Workpiece Spindle Speed: 1 – 2,000 rpm Workpiece spindle mounting: MT4 Tailstock Tailstock quill mounting: MT3 Tailstock quill stroke: 30 mm Dodpfxjvz Snks Aa Hewf Fine adjustment range (cylinder): ± 0.04 Equipment Paper band filter system Rinsing pistol Mechanical mist extraction

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 external grinding spindle Country of manufacture: Switzerland Voltage: 380/50/3 Dsdpfew T Sh Eex Aa Hewf Net machine weight: 4000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Max. workpiece weight: 80 kg Longitudinal slide Z Max. travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000 model: 0.001–5,000 mm/min) Resolution: 0.0001 mm Cross slide X Max. travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000 model: 0.001–10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swivel range: -15 to 225° (early 2000 model: -15 to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Speed: 1 – 1500 rpm Taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000 model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µ Control: Fanuc 21i-TB Specifications provided are subject to verification and do not constitute a binding offer.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen,

Stanje: rabljeno, Leto izdelave: 2014, Grinding diameter 100 mm Grinding length 400 mm Center height 100 mm Z-axis 425 mm Table speed - stepless - 0.05 - 5.00 m/min Workpiece headstock speed range 90 - 1,000 rpm Workpiece headstock swiveling -2° to +30° Tailstock quill taper MK 3 Grinding wheel speed 1,800 / 2,000 rpm Grinding wheel drive 3.70 kW Grinding wheel dimensions 350 x 50 x 127 mm Djdpfxswbvgve Aa Hewf Total connected load 7.00 kW Machine weight approx. 2.50 t Space requirement approx. 3.00 x 2.50 x H2.20 m With 2-axis digital readout FAGOR, coolant system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Voumard Internal Cylindrical Grinding Machine Centre Height: 180 mm (optionally higher) Grinding Depth: 200 mm Workpiece Weight: 170 kg Dwedpfxshpn Sxo Aa Hsf Further Customisable Options - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive incl. PLC-Pro (cycle-controlled) - "Workpiece Storage" PLC-PRO for 10/15/30/50 workpieces - Mini hand-held control device for PLC-PRO - Rotary encoder in swivel axis - Glass scale in Z-axis - Frequency converter for internal grinding spindle - Conversion of slide to pneumatic lift-off - Increased centre height - CE marking in combination with partial or full encapsulated splash guard - Remote maintenance - Suitable coolant / extraction system - and much more. We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and many more.

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2205, premer brusilnega koluta: 350 mm, širina brusilnega kolesa: 5 mm, montažni premer: 75 mm, Power supply: 400 V/50 Hz Power rating: 70 kVA Fusing: 3x125A Conductor cross-section: 5x25 mm² Cu Workpiece diameter: ⌀ 5 to ⌀ 50 mm Workpiece length: 50–300 mm Dodpfxswfg Rgs Aa Hewf - Manual loading and unloading - External fully automatic loading device - Workpiece spindle head fixed on grinding table Workpiece spindle unit: Dimensions: ⌀ 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: with air purge Drive: with HF motor Special mount: Junker standard flange ⌀ 75 mm Max. speed: 6000 rpm Tailstock: Longitudinal adjustment: manual Rotating center: Junker standard flange ⌀ 48 mm (⌀ 75 mm) Grinding table: Feed: Z-axis Grinding spindle head: Infeed: X-axis Swivel horizontally: B-axis HF grinding spindle unit I, II, III: Dimensions: ⌀ 165 x 350 mm Flange: ⌀ 190 mm Standard mount: ⌀ 127 mm Lubrication: Permanent grease lubrication Bearing seal: with air purge Drive: 8 kW Balancing: electronic Max. speed: 8800 rpm Grinding wheel I, II, III: Type: Borazon (CBN) ceramic bonded Diameter: ⌀ 350 mm Bore: ⌀ 127 mm Abrasive width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Stanje: rabljeno, Krožna brusilka SCHAUDT RFH500 Dwedpfexbt Hksx Aa Hjf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS Dwsdpow T Sd Tofx Aa Hjf MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: dober (rabljeno), Stroj je v dobrem stanju in opremljen z dodatno opremo. Djdswu Ey Eopfx Aa Hswf

Stanje: dober (rabljeno), Proizvajalec: Beling & Lubke Model: okrogli brusilni stroj Dwedpfx Ajxal Iwsa Hef Stanje: Rabljeno

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Studer S30 Centre height: 125 mm Centre distance: 650 mm Workpiece weight: 80 kg Dedpfx Aasd Hdxwj Hjwf Further selectable options: - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive incl. Pro PLC (cycle-controlled) - "Workpiece storage" PLC-PRO for 10/15/30/50 workpieces - Linear glass scales on X and Z axes - Swing-in internal grinding device - Motor spindle for internal grinding device - Frequency converter for external grinding spindle - Frequency converter for internal grinding spindle - Touch detection system - Contact guard on external grinding spindle - Manually operated safety door - Grinding wheel flange - LED spotlight with flexible arm - Matching coolant system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, višina središča: 100 mm, širina na sredini: 680 mm, skupna dolžina: 620 mm, premer brušenja: 199 mm, Condition of the machine: The machine is currently in used, non-refurbished condition. All wear parts of the machine will be replaced, including the X-axis feed spindle, and all assemblies will be brought to a like-new condition. After refurbishment, the machine is easily comparable to a new machine. Geometry: The machine will be completely disassembled except for the guideways. Before restoring the geometry of the individual tables and assemblies, the guideways of both the Z and X axes will be hand-scraped and restored to like-new condition. Upon completion of these works, the machine will receive a measurement report according to the original manufacturer's specifications. Electronics: The electronics and the control cabinet enclosure will be completely replaced. All electrical components will be renewed, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, will be replaced. The hydraulic unit will be overhauled, and the hydraulic lines will be replaced with new ones. Painting: Once the geometry of the machine has been restored, it will be prepared for repainting. All covers, tables, and the machine bed will be stripped of old paint, cleaned, and newly coated. Technical data of the machine: Centre height: 100 mm Centre width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Machine weight and footprint: 2600 kg // 2320 x 1400 x 1450 mm Standard equipment: Dsdpsv Hqlrefx Aa Hewf • 1 pc. grinding spindle head Ø35 • 1 pc. workpiece spindle head MK5 • 1 pc. safety cover for discs Ø400 mm • 1 pc. tailstock MK3 standard • 1 pc. flange Ø127 mm • 1 pc. hydraulic unit • 1 set of operating tools and operating manual

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3793000, Please provide your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and the United Kingdom. Scope of delivery: - Machine - Loading system - Conveyor belt - Workpiece carrier Machine technical data: - 5-axis grinding center incl. oval feed belt and loading portal - 12-position tool changer with HSK 63 - Maximum X-axis travel: 500 mm - Maximum Y-axis travel: 650 mm - Maximum Z-axis travel: 650 mm Dwjdpfevbgccox Aa Hof - Table size: 500 x 650 mm - Cut detection - Nordmann dressing spindle - Oil supply via the factory central lubrication system Without packaging; any warranty rights are excluded. If you wish to dismantle the system yourself, please inform us accordingly in your offer. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, nor for compliance with all safety and environmental protection requirements as specified in the accident prevention regulations.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Schaudt PS51 S600 – Premium Refurbished - Grinding length: 600 mm - Centre height: 180 mm - Grinding wheel width: 220 mm (optionally more possible) - Workpiece weight: 200 kg Further selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus - Rapid setup via GSN operator interface - In-process measuring control DMK / LMK - Dressing spindle for diamond form roller - Balancing and acoustic touch sensor systems - Hydraulic tailstock clamping/release - Automatic Siemens door drive - Remote maintenance - Conversion to needle nozzles - Matching coolant / extraction system - Automation preparation Dwedpfxefg Utds Aa Hsf - and much more We are also happy to overhaul your existing stock machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.