Cilindrični brusilni stroj

Voumard Innenrundschleifmaschine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Hsdpfx Abew Ucyujhjh Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: dober (rabljeno), Leto izdelave: 2001, dolžina brušenja: 650 mm, širina brušenja: 525 mm, skupna višina: 350 mm, dolžina mize: 600 mm, širina mize: 350 mm, Manufacturer: Geibel & Hotz Model: FS 635-Z SA Control: Digital readout Year of manufacture: 2001 Magnetic table 600 x 350 mm Enclosed housing for CE compliance Vertical automatic feed (SA) Automatic lubrication Coolant tank Specifications Metric / US Standard X-axis 650 mm Y-axis 525 mm Z-axis 350 mm Table length 600 mm Table width Hjdpevdal Ajfx Abheh 350 mm Table load capacity 400 kg Feed rate X-axis 35,000 mm/min Feed rate Z-axis 1,000 mm/min Grinding wheel size 300 x 50 x 76.2 mm Power 3.7 kW Speed 2,800 rpm Dimensions (approximate) Length 3,200 mm Width 2,000 mm Height 2,870 mm Weight 2,300 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Casting force 55 kN Casting stroke 130 mm Hedpfxefrvzvj Abheh Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: dober (rabljeno), premer brušenja: 1.600 mm, dolžina brušenja: 6.000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Hsdpfxovvvw Ej Abhoh Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Dimensions (approximate): Length: 15100 mm Width: 5500 mm Height: 3550 mm Weight: 120,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Hedsbambrspfx Abheh Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: rabljeno, Leto izdelave: 1996, številka stroja/vozila: 7/4986, Total pressing force: 250 - 400 t Hedpfjuqdxiox Abheh Hydraulic ring serration force (lower table): 20 - 200 t Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring serration stroke: 40 mm Counterholder stroke: 40 mm Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min⁻¹ Rapid approach speed: 120 mm/s Rapid return speed: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2400 kg Standard equipment Automation Roll-off trough with straightening machine

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Hsdpfx Asia Rtdsbhoh Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Stanje: zelo dobro (rabljeno), Control: D.Electron Z 32 Center height: 220 mm Center distance: 1000 mm Swing diameter over bed: 440 mm Hsdpfx Aed Sitkjbhoh Swing diameter over cross slide: 245 mm Travel path - Z axis: 750 mm Bed width: 320 mm Spindle mount: CL 6“ Spindle bore: 62 mm Spindle speed: 0 – 2000 rpm Rapid traverse X/Z: 7 m/min Tailstock quill stroke (manual): 200 mm Tailstock quill diameter: 80 mm Tailstock taper: MK 4

Leto izdelave: 1997, Stanje: rabljeno, Cena: Na zahtevo - Leto izdelave: 1997 - Dokumentacija na voljo: Da - CE oznaka prisotna: Da - CE certifikat na voljo: Ne - Upravljanje: CNC - Število osi [kos]: 5 - X-os pomik [mm]: 1200 - Y-os pomik [mm]: 880 - Z-os pomik [mm]: 800 - Dolžina mize [mm]: 5000 - Orodni nosilec: SK40 - Najv. hitrost vretena [rpm]: 18000 - Možnosti: Digitalni prikaz - Tip digitalnega prikaza: Heidenhain Finančne informacije DDV: Naveden cena je brez DDV Hodowh Shvepfx Abhsh DDV/Obdavčitev razlike: DDV je odbitni za podjetja Dostava in odkup so vedno mogoči za vse iz industrijskega področja Lukas van Rossum

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Hsdourw Uyepfx Abhsh Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment