Vertikalni obdelovalni centri z X-hodom 0–399 mm nakup rabljenega (31)

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 Gsdpfsw Hugxsx Ab Teca MILLING SPINDLE - Tool holder: HSK E-25 - Spindle drive power: 3.9 [kW] - Spindle speed: 40,000 [rpm] LINEAR AXES - Travel X/Y/Z axes: 240/240/240 [mm] - Rapid traverse speed (X/Y/Z): [mm/min] - Feed speed (X/Y/Z): 0.02 - [mm/min] SWIVEL AXIS A - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] - Max. workpiece diameter: 100 [mm] SWIVEL AXIS B - Travel: -30 / +210 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 32 - Tool change time: 7 [sec] TABLE - Max. table load: 60 [kg] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 6.4 [kW] WEIGHT AND DIMENSIONS - Required space: 1,900 x 1,600 [mm] - Machine height: 2,200 [mm] - Machine weight: 1,000 [kg] MACHINE HOURS - Power-on hours: 24,350 [h] - Operating hours: 6,500 [h] ACCESSORIES - Control: HEIDENHAIN TNC 430 - Dividing head type: 4th-5th axis integrated - Coolant tank - Coolant container: HYFRA - Tool measuring probe system - Tool holders: 31

Stanje: rabljeno, Leto izdelave: 2001, x-travel 300 mm Gcsdpfx Aewth Sbeb Tsa y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB Max. spindle speed 15,000 rpm Tool holder HSK-A 32 Number of tool stations 12 positions According to our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, pictured tools and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Technical specifications and details subject to change and error. Prior sale reserved!

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC machine RXP400DS/ RXD5 Godpfxolzhhcs Ab Tsca -Refurbished- The machine is fully refurbished, tested, and measured in our facility. The machine then meets the tolerances of a new machine! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of linear axes: Linear motors on all axes. - Drives of rotary axes: High-dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control for the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 12-position linear tool changer; optional conversion to chain magazine - Option: high precision - Remote maintenance via Teamviewer - Transport dimensions of the machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: approx. 3,000 kg A demonstration of the machine in ready-to-operate condition is possible at any time. You are also welcome to find more information about our refurbished machines on our website or on our Hüttmann YouTube channel.

Leto izdelave: 2002, Stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Gcsdpelz Rvlofx Ab Tsa Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 11.019 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 278346, potovalna razdalja osi X: 350 mm, pomik osi Y: 550 mm, pomik po osi Z: 510 mm, teža obdelovanca (maks.): 200 kg, največja hitrost vretena: 12.000 obr/min, DÉTAILS TECHNIQUES Courses et axes Axe X : 350 mm Axe Y : 550 mm Axe Z : 510 mm Axe A : -120° / +30° Axe C : 360° Vitesse de déplacement rapide XYZ : 30 m/min Hauteur sous la broche : 50 mm ∼ 560 mm Broche Puissance du moteur de broche : 11 kW Vitesse de broche : 12 000 tr/min Table Dimensions de la table : 500 x 400 mm Poids maximal de la pièce : 200 kg Données outils Diamètre maximal de l'outil : 90 mm Diamètre maximal de l'outil avec poches adjacentes vides : 130 mm Longueur maximale de l'outil : 300 mm Nombre de stations d'outils : 18 postes Temps de changement d'outil (puce à puce) : 6,2 s Gcodpfew Nv Tksx Ab Tsa DÉTAILS MACHINE Commande : Mazatrol Smooth Dimensions Dimensions de la machine (L x l x H) : 3 226 x 1 900 x 2 840 mm Poids : 6 900 kg Heures de fonctionnement Heures d'usinage : 11 019 h Heures sous tension : 29 233 h ÉQUIPEMENT Filtre à brouillard d'huile Refroidissement par la broche Palpeur Renishaw

Stanje: delavnici obnovljeno (rabljeno), potovalna razdalja osi X: 310 mm, pomik osi Y: 294 mm, pomik po osi Z: 210 mm, skupna masa: 3.000 kg, največja hitrost vretena: 50.000 obr/min, Used HSC Machine RXD5 -Refurbished- The machine is fully refurbished, inspected, and measured at our facility. The machine once again meets new machine tolerance specifications! Working Area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Linear Axis Drives: Linear motors on all axes. - Rotary Axis Drives: Highly dynamic direct drives with integrated cooling. - Feed rates: 0 - 40,000 mm/min on all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, tool wear monitoring, and tool breakage control for milling tools. - Chuck control, 1st chuck - Emulsion cooling system with mechanical oil mist extraction Gcsdelzhhkjpfx Ab Tja - RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - 24-position tool changer for parallel main time tool changes - High-precision option - Remote maintenance via TeamViewer - Transport dimensions (machine): W 2,425 x D 1,925 x H 2,070 mm - Weight: approx. 3,000 kg The machine can be inspected in operational condition at any time. For more information about the type and scope of our refurbished machines, feel free to visit our website or our Hüttmann YouTube channel.