Univerzalna obdelovalna središča 0–599 mm pomik v osi X nakup rabljenega (154)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.380 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 18.000 obr/min, število mest v zalogovniku orodij: 30, kot vrtenja osi B (max.): 108 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool stations: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Nodpfx Ajwu Evtebbecl Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC swivel rotary table - Internal coolant supply (IKZ): 40 bar prepared - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Stanje: dober (rabljeno), Leto izdelave: 2001, MACHINE SPECIFICATIONS Control System: HEIDENHAIN Nsdpfxexq Hb Te Abbjcl Machining Area: X-axis travel: 500 mm Y-axis travel: 420 mm Z-axis travel: 380 mm Main Drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Torque (40/100% duty cycle): 130/87 Nm Feeds: Working feed (X/Y/Z): 20 – 20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work Table (B+C Axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360° (resolution 0.001°) B-axis travel: 180° (resolution 0.001°) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical Connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Through-spindle coolant Automatic tool changer: ATC-32 - Max. tool weight / Max. tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity cooling system: Interlit SUK-200-900 Equipped with Renishaw probe interface: probe included

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, proizvajalec krmilnikov: Heidenhain, skupna višina: 2.500 mm, skupna dolžina: 4.000 mm, skupna širina: 2.200 mm, obremenitev mize: 200 kg, skupna masa: 3.500 kg, Znamka: Deckel Maho Model: DMU 50T Serijska št.: 500051 Krmilnik: Heidenhain Dimenzije mize: 500 x 700 mm Ncodpsw D Hafsfx Abbsl Največja nosilnost mize: 200 kg Pomik stroja: X: 500 mm Y: 400 mm Z: 400 mm Vreteno: Število vrtljajev: 9.000 min⁻¹ Konus: SK 40 Revolver za orodja: 16 pozicij Hitri pomiki: X, Y, Z: 12 m/min Dimenzije stroja: 4.000 x 2.200 x 2.500 mm Teža stroja: 3.500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 11.440 h, DMG 5-osni simultani stroj Nodpfx Ajw Hxiwjbbscl HSC 30 Linear Leto 2014 Krmiljenje Heidenhain TNC640 Pomiki X320 / Y300 / Z280mm B os +/- 120 stopinj C os 360 x 0,001 stopinje HSK-E40, 40.000rpm Zasukalna vrtljiva miza Merilna sonda Sistem za merjenje orodja BLUM 3D hitra nastavitev Cikel nastavitve aplikacije Zračni pihalnik skozi vreteno Sistem za ultra fino filtracijo vključno z orodji ----- Razprodaja zalog -----

Stanje: rabljeno, Leto izdelave: 2012, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range: -5° to +110° C-axis: 360° Maximum load capacity: 400 kg, direct measuring systems incl. table cooling Dynamic package: Linear drive in X / Y axis Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooling for main spindle, linear drive, and table Ncedpfxeyc Tthe Abbel Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm, HSK-A63 according to DIN 69893 • Tool magazine: chain-type magazine with 60 positions • Tool length measurement and breakage control: Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ) paper filter 40 bar, 231 l/min, 600 l tank, incl. rotating viewing window, sealing air for linear systems, bed flushing • Air blast through spindle center selectable via M function, maintained air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass windows for work area door and side window • Operating mode 4 • High speed settings • Probe: Blum HSK-A63 • Preparation for 3D QuickSet • Possible oil mist extraction system • New spindle installed at 25,800 spindle hours

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 5-osno Vreteno 18.000 vrt./min Magazin za orodja s 32 mesti Orodni vpenjalni SK40 Delovne ure vretena: 15.389 Zeroclamp 12 loncev 138 (sistem ničelne točke vpenjanja) Komponente: Stroj z NC rotacijsko mizo in pick-up magazinom Transporter za ostružke Sistem za hlajenje in mazanje 250 l Tračni filtracijski sistem 600 l Separator oljne/emulzijske megle Ncedpfxjyc Tq Ho Abbel

Stanje: rabljeno, DMU60: 5-osni Vreteno 18000 o/min Magazin za orodja s 24 mesti Vpenjalni stožec SK40 Ncjdpoyc Tmbjfx Abbsl Delovne ure vretena: 15305 Zeroclamp 6 loncev 138 (sistem vpenjanja v ničelni točki)

Stanje: rabljeno, Leto izdelave: 2014, X-hod 400 mm Y-hod 400 mm Z-hod 375 mm Ncodpfx Ajycxihebbel Skupna potrebna moč --- kW Teža stroja pribl. 7,6 t Prostorske zahteve pribl. --- m DMG MORI DMU 40 EVO (2014) X - 400 mm Y - 400 mm Z - 375 mm Heidenhain iTNC530 z merilno sondo TS649 Vrtljaji vretena: 14.000 min-1 Magazin orodij za 30 kos / Orodni nosilec HSK63 Trakasti filtrirni sistem z notranjim hlajenjem 40 BAR

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 84.564 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 12 m/min, hitri pomik os Y: 12 m/min, hitri pomik na osi Z: 12 m/min, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, nazivna (navidezna) moč: 17 kVA, proizvajalec krmilnikov: iTNC 530 Heidenhain, model krmilnika: iTNC 530 Heidenhain, skupna višina: 2.500 mm, skupna dolžina: 3.000 mm, skupna širina: 3.000 mm, širina mize: 500 mm, dolžina mize: 650 mm, obremenitev mize: 200 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 10.000 obr/min, delovne ure vretena: 22.855 h, moč vretenovega motorja: 13.000 W, število mest v zalogovniku orodij: 16, dolžina orodja: 300 mm, premer orodja: 130 mm, teža orodja: 6 g, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in well-maintained condition. Several components have been serviced or newly refurbished. The following work has been carried out: - Complete overhaul of the X-axis bearings, including ball screw and bearing mounts - Various hydraulic components serviced - Tool changer recalibrated and sensors replaced - New door switch installed - New windows fitted (unfortunately already show some minor chip impact) - New coolant pump - New monitor installed (due to previous defect) - New handwheel HR410 The machine has relatively low spindle hours and operating hours. It has never been used for series production at our facility and has always been operated with care and expertise, utilizing warm-up programs, etc. As a tool and mold maker, our applications are more focused on complex contours rather than heavy-duty machining. Ncsdpfevtnm Hjx Abbol I am only selling because I require a simultaneous (5-axis) machine and larger travel distances. Technical Data: Year of manufacture: 2005 X travel: 500 mm y travel: 450 mm z travel: 400 mm Control: iTNC 530 Heidenhain Main spindle: Speed range: 20 - 10,000 rpm Drive power: 9 / 13 kW Torque: 57 / 82 Nm Tool holder: SK 40 Rotary table Table clamping surface: 630 x 500 mm Swivel range: -5 / +110° Max. table load: 200 kg T-slot size: 14 H7 T-slot spacing: 63 mm C-axis: +/- 360° Feed rates: Rapid traverse (X/Y/Z): 12 m/min Feed speed: 10,000 mm/min Tool changer: Tool stations: 16 positions Max. tool weight: 6 kg Max. tool length: 300 mm Max. tool diameter: 80 mm Max. tool diameter with adjacent empty pocket: 130 mm Tool holder: SK 40 Total connected load: 17 kVA Machine weight: approx. 3.6 t Space requirements: approx. 3.0 x 3.0 x 2.5 m Universal tooling milling machine Deckel Maho - DMU 50 Note: No chip conveyor and no automatic measuring probe included! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally left uncleaned for the photos to show its current, regularly used condition. Spindle and machine hours are visible in the pictures. Kinematics and geometry suit our needs but may benefit from recalibration. The machine has never experienced any crashes during our operation.

Stanje: rabljeno, Leto izdelave: 2016, proizvajalec krmilnikov: Heidenhain, model krmilnika: TNC 640, Opis: Vreteno: Nodjyad A Ispfx Abbecl Tehnologija: direktni pogon Obrati: 12.000 vrt./min Moč (maks.): 13 kW Navor (maks.): 95 Nm Vpenjalni stožec orodja: SK40 NC-nagibna okrogla miza: Os B: -50°/+110° Os C: 360° Vpenjalna površina: ø450 mm Obremenitev mize (maks.): 200 kg Splošno: Orodniški magazin: 48 postaj Hitri pomik v X/Y/Z: 48 m/min Oprema/pribor: Merilni sistem: direkten (steklene letve) v X/Y/Z Sistem za odvod ostružkov: transporter ostružkov Sistem hlajenja: notranji sistem z visoko tlačnim filtrom, 30 bar Merjenje obdelovanca: merilna tipala, Heidenhain TS740 Merjenje orodja: laserski sistem, Renishaw NC4 TX Ročni način upravljanja: elektronski ročni kolesec Dodatna oprema: hladilnik vretena Dodatni pribor: različni rabljeni vpenjalci orodja

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 650 mm, pomik po osi Z: 520 mm, CNC control Heidenhain iTNC530 NC rotary-swivel table on the right Fixed table on the left 30-position tool changer Electronic handwheel ICS (internal coolant supply) 20 bar Chip conveyor Technical details: X-axis travel: 1200 mm X-axis travel, rotary-swivel side: 500 mm X-axis travel, fixed table side: 570 mm Y-axis travel: 650 mm Z-axis travel: 520 mm A-axis: +90° / -110° C-axis: 360° Spindle taper: SK40 Spindle speed range: 30–8000 rpm Feed rate: 0–45000 mm/min Swivel rotary table dimensions: 520 x 420 mm Interfering edge diameter: 610 mm Height of support bearing: 90 mm Fixed table dimensions: 700 x 600 mm Njdpfx Ajtu S Irjbbocl Number of tool stations in tool changer: 30 Drive capacity: 22 kW Weight (approx.): 8,500 kg Technical data, accessories, and machine description are not binding.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 330 mm, About us Since 2014, as a machine manufacturer, we have been developing and producing our systems in Austria. In addition to our individually configurable standard machines, we are also able to offer custom solutions. We would be happy to send you our product catalogue—just get in touch with us. HSC 544HP Machining Center 3rd Generation Key Data - Travel: 500x400x330 mm - BT30 spindle with 20,000 rpm and 10.5 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Incl. portal height extension and rotary/swivel table with a table diameter of 160 mm - Compact dimensions: W 1,460 x D 1,470 x H 2,230 mm, weight approx. 2,200 kg Machines are configured and assembled to customer specifications. A wide range of options is available depending on your requirements, such as different spindle types up to 60,000 rpm, various cooling systems, direct position measuring systems, integrated automation, and more. Control System - CS-Lab / AMT | optional Beckhoff - Clear and customizable user interface; easy operation via touchscreen - S-curve acceleration for dynamic axis movements with high precision - Integration of robots, pallet changers, workpiece changers, etc., possible Machine Frame - Solid mineral casting machine frame, optimized via FEM simulations - Very high vibration damping, rigidity, and ideal thermal behaviour - Use of roller guides instead of conventional ball bearing guides for maximum stiffness Ncjdpfxoxtvfyo Abbol - High-speed ball screws with reduced heat generation Drivetrain - Well-matched AC servo drives on each axis for high contour accuracy - Direct-driven, backlash-free ball screws Spindle Types Overview 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We are happy to provide you with professional and comprehensive advice to offer exactly the right solution for your machining tasks.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 600 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 80 m/min, hitri pomik na osi Z: 80 m/min, hitrost pomika os X: 80 m/min, hitrost podajanja osi Y: 80 m/min, hitrost podajanja os Z: 80 m/min, skupna višina: 2.900 mm, širina mize: 400 mm, dolžina mize: 400 mm, obremenitev mize: 200 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 28.000 obr/min, delovne ure vretena: 39.945 h, dovod hladilne tekočine: 40 letvica, število mest v zalogovniku orodij: 120, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) including all pallets - High-pressure system / belt filtration unit (DMG) - Cooling unit (OLAER) - Chip conveyor Not included in the scope of delivery: - Vices - Tool holders Ncedpfx Aju Ivkgjbbsl Technical data of the machine: - See attached order confirmation Technical data of the automation system: - Available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Machine model: DMU 50 eVolution (5-axis machining centre) Ncjdpsyay Rzjfx Abbjl Controller: Heidenhain MillPlus (MillPlus control) Axes: 5 (X, Y, Z, B, C) Machine weight: approx. 5,000–5,100 kg Installation dimensions (L × W × H): approx. 2,683 × 5,353 × 2,470 mm Total power requirement: ~ 38–40 kVA Working Area & Axes X-axis travel: 500 mm Y-axis travel: 420 mm Z-axis travel: 380 mm B-axis (swivel range): ±180° C-axis (rotary range): 360° Spindle Data Max. speed: 20–18,000 rpm (steplessly variable) Spindle drive: approx. 35 kW (40% duty cycle) / 25 kW (100% duty cycle) Torque: approx. 130 Nm (40% duty cycle) / 87 Nm (100% duty cycle) Tool holder: SK 40 (standard) – HSK possible for some versions (optional) Table & Workpiece Table size: ø 500 × 380 mm Max. table load: 200 kg T-slots: 7 × 14 mm (H7) ⚙️ Tool magazine Magazine positions: 32 Max. tool length: ~ 200 mm (depending on magazine configuration) Max. tool weight: ~ 6 kg Feeds / Rapid Traverse Working feedrate: up to 20,000 mm/min Rapid traverse X/Y/Z: up to 50 m/min

Stanje: rabljeno, Leto izdelave: 2001, Technical specifications: Tool holder: SK 40 Travel distances: Nsdst Hr Ahspfx Abbscl X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Maximum tool weight: 260 kg Spindle speed: 12,000 rpm Maximum table load: 380 kg Weight, approx.: 6,500 kg Dimensions (LxWxH), approx.: 2,000 x 2,200 x 2,400 mm Equipment: - Heidenhain TNC 430 control - 4th axis by SMP (France)

Stanje: dober (rabljeno), Leto izdelave: 1990, CNC machining center Manufacturer: MORI SEIKI Ncsdpfx Ajt Rg E Sebbsl Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel distances: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw diameter: 36 mm Feed drives FANUC AC: X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: + / - 2 seconds Repeatability: + / - 1 second Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamping time: 7 sec Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: Work end display with alarm light Magazine for 30 tools Operating hours counter Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Required floor space: 1,900 x 2,300 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, The ONIX 3300 is a CNC machining centre with 3 + 1 controlled axes, specifically designed for drilling and milling operations on aluminium, PVC, light alloys, and steel profiles up to a maximum thickness of 3 mm. This machine provides a useful working area of 3,300 mm and features an automatic tool magazine with 8 positions, allowing for the accommodation of an angular unit to perform machining on three sides of the profile, as well as a disc cutter for end-milling operations. The fully enclosed frame houses the electrospindle, which delivers 4 kW of power with a rotation speed up to 18,000 rpm, ensuring high performance and superior machining quality. The pivoting control console, positioned on the right side of the machine, allows for easy and intuitive program and control management at every stage of the work cycle. The ONIX 3300 is equipped with CNC axis control and an industrial PC for program management, complete with a 17” LCD monitor, 80 GB hard disk, and two USB ports. The programming language is ISO standard, featuring a Windows XP-based user interface, and dedicated ITALSOFT – FLY CAM 3D CAD-CAM software, optimised for process and production cycle management. Technical Specifications Ncjdpfxewb D Ste Abbsl - Dimensions (LxWxH): 4,500 x 1,250 x 2,300 mm - Transport dimensions (LxWxH): 4,600 x 1,675 x 2,260 mm - Weight: 1,500 kg - Rated power: 6 kW - Absorption: 16 A - Supply voltage: 400 V three-phase - Frequency: 50/60 Hz - Air pressure: 7 bar - Accuracy: 0.1 mm - Electrospindle power: S1 4 kW – 0–18,000 rpm - Max torque: 3.7 Nm at 12,000 rpm - Tool holder: ISO 30 - Spindle cooling: Electric fan - Working zone: 1 - Machinable sides: 1 (3 sides with angular head) - Number of standard clamps: 4 (manual) - Tool magazine: 8 positions (integrated in machine base) - Clamping force: 130 kg per clamp - Reference point: 1 (manual) - Lubrication nozzles: 1 on electrospindle - Lubricant tank capacity: 2.2 litres - Guide lubrication: Manual - Operating temperature: From 10 to 35°C - Humidity: 75% - Standard colours: RAL 7032 / RAL 5018 - Swarf evacuation: Swarf conveyor plate - Machine safety: Photoelectric safety barrier - Operator interface: 17" LCD monitor - USB port: On control panel - Software: ITALSOFT CAD-CAM

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M Equipped with Heidenhain TNC 320 control Year of manufacture: 2001 Travel distances: X 500 mm Y 400 mm Z 400 mm Spindle speed range: 20 – 4,500 rpm, stepless Ncodpfx Abeuw Sd Iebsl Includes the following accessories: Manual swivel rotary table with digital display for C + B axis 700 mm x 500 mm clamping area Electronic handwheel for X, Y, Z axes Splash guard enclosure Machine lamp 4 adjustable leveling machine feet Coolant system Operating manual

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, potovalna razdalja osi X: 550 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 500 mm, hitrost pomika os X: 32 m/min, hitrost podajanja osi Y: 40 m/min, hitrost podajanja os Z: 40 m/min, proizvajalec krmilnikov: FANUC, model krmilnika: Professional 5, višina obdelovanca (maks.): 500 mm, premer obdelovanca (maks.): 650 mm, teža obdelovanca (maks.): 350 kg, skupna višina: 3.200 mm, skupna dolžina: 3.550 mm, skupna širina: 29.000 mm, skupna masa: 15.700 kg, največja hitrost vretena: 20.000 obr/min, število mest v zalogovniku orodij: 323, dolžina orodja: 300 mm, premer orodja: 70 mm, teža orodja: 8.000 g, CNC control: FANUC Professional 5 Axes Travel X-axis (mm): 550 Travel Y-axis (mm): 1000 Travel Z-axis (mm): 500 C-axis indexing (degrees): 360 (continuous rotation) / rotary encoder A-axis indexing (degrees): 150 (+30 120º) / rotary encoder Feed rates (m/min): X: 32; Y, Z: 40 Rapid traverse (m/min): X, A, C: 48; Y, Y: 50; A, C: 18 Worktable Pallet dimensions (mm): 500 Max. workpiece size (D x H) (mm): 650 x 500 Max. workpiece weight (kg): 350 Spindle Max. spindle speed (rpm): 20,000 Tool system Tool holder: HSK-A63 Number of tools in magazine: 323 Tool changer type: Matrix Max. tool diameter (mm): 70 With adjacent tool pockets occupied (mm): 140 Max. tool length (mm): 300 Max. tool weight (kg): 8 Equipment Electronic handwheel Chip conveyor Helical interpolation Common variables for user-defined macros (100) Machine operation time: Ncsdpfx Aevfmlrobbjl Spindle working hours: 0h (Retrofitted) Main machine: Dimensions/Weight Length (mm): 3550 Width (mm): 2900 Height (mm): 3200 Weight (kg): 15,700

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. Nsdpfx Aboxcldkebscl We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Ncjdsvyr Tdepfx Abbel Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. >> Geometric inspection (acceptance report available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: rabljeno, Leto izdelave: 2008, X-hod: 500 mm Y-hod: 450 mm Z-hod: 400 mm Krmilnik Heidenhain iTNC530 Skupna priključna moč --- kW Teža stroja ca. 5,0 t Potrebni prostor ca. 5,10 x 6,10 m DMG MORI DMG 50 (2008) 3+2 osi Heidenhain iTNC 530 Njdpfxsycxius Abbscl X - 500 mm Y - 450 mm Z - 400 mm B - (-5° / +100°) C - 360° Miza: 630 x 500 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, DMG CMX 50 Ncsdpsx Sqyfsfx Abbel Krmilnik: Siemens 840D sl Pomik X: 500 mm Pomik Y: 450 mm Pomik Z: 400 mm Leto izdelave: 2023 Teža: 4700 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, CNC - univerzalna obdelovalna centra DECKEL MAHO - DMU 50 T Leto izdelave: 2003 x-hod: 500 mm y-hod: 400 mm z-hod: 400 mm Krmiljenje: Siemens 810 D Obseg vrtljajev - glavno vreteno: 20 - 9.000 min⁻¹ Pogonska moč - glavno vreteno: 9 / 13 kW Vpenjalni stožec: ISO 40 DIN 69871 Velikost mize: 700 x 500 mm Nagibna os B: 105° (-10°/+95°), ročno Zavrtenje 360° ročno Maks. obremenitev mize: 200 kg Število T-utorov: 7 Razmak T-utorov: 63 mm Širina T-utorov: 14H7 mm Centrirna izvrtina: 30H7 mm Število mest za orodja: 16 Ncsdpfx Asx Auvvobbel Vpenjalo orodja: ISO 40 DIN 69871 Maks. dolžina orodja: 290 mm Maks. teža orodja: 6,0 kg Maks. skupna masa: 50 kg Maks. podajalna hitrost: 10.000 mm/min Hitri pomik: 12 m/min Natančnost vnosa: 0,01 mm Skupna priključna moč: 17 kW Teža stroja pribl.: 3,2 t Dimenzije stroja (D x Š x V): pribl. 4,0 x 4,0 x 2,5 m - 5 osi (3 + 2) - Nagibna rotacijska miza z indikatorjem kota (osi B+C ročno s ročnim kolesom) Na voljo takoj. Vključno z držali za orodja in sistemom za vpenjanje na ničelni točki.

Stanje: rabljeno, Leto izdelave: 2002, Znamka: DECKEL-MAHO, Tip: DMU100T, Leto izdelave: 2002, Krmiljenje: Heidenhain, Tip iTNC 530, 5 osi (nagibna glava, NC-rotacijska miza), 32-kratni menjalnik orodij, vpenjanje orodij SK40, hitrost vretena 10.000 obr/min, transporter odrezkov, hladilna enota Schimpke, tračni filter Interlith, Tip STB3/600HD, delovne ure: 72.535; 28.209, nadzor orodij Brankamp, 4 predalniki/kontejnerji, 1 WTS rolo omara, vsebina: cca 150 držal za orodja SK40, vpenjalni elementi, merilna orodja, navojni svedri, centrirni svedri, 1 HD primež Allmatic LC 160-200, infrardeči merilni tipal (v WW) Nedpox R Edvefx Abbjcl +++ Pozor: Stroj je del spletne dražbe! +++