CNC stružnice 0–199 mm premer struženja nakup rabljenega (330)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, obratovalne ure: 234 h, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 510 mm, pomik po osi Z: 1.350 mm, skupna višina: 1.800 mm, skupna širina: 1.800 mm, skupna masa: 2.700 kg, največja dolžina izdelka: 3.200 mm, število osi: 2, Horizontal lathe from 2024. This STYLE 510 offers a swing over bed of 510 mm and a distance between centers of 1,350 mm. It features a maximum spindle speed of 2,500 rpm and a rapid traverse of 8 m/min. If you are looking for a high-quality lathe, consider the STYLE 510 we have for sale. Contact us for further details. • Turning capacity • Swing over bed: 510 mm • Swing over cross slide: 300 mm • Distance between centers: 1,350 mm • Maximum workpiece weight between centers: 600 kg • Bed width: 330 mm • Main spindle • Spindle bore: 80 mm • Spindle nose: D1-8 • X and Z axes • Rapid traverse: 8 m/min • Feed rate: 2 m/min • Tailstock • Quill diameter: 75 / 80 mm • Quill stroke: 160 mm • Taper: MT5 Additional equipment • Tools and toolholders (not included; available at extra cost) Technical Specification Djdpfxsy T Nfps Abgokp Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, obratovalne ure: 953 h, največja hitrost vretena: 2.800 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 1.350 mm, moč vretenovega motorja: 22.000 W, proizvajalec krmilnikov: FANUC, model krmilnika: i-series, število mest v zalogovniku orodij: 12, število osi: 2, Horizontal lathe from 2011. The DOOSAN Puma 2600L offers a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It features a robust spindle speed of up to 2,800 rpm and a 12-position turret. If you are looking for a high-quality lathe, consider the DOOSAN Puma 2600L, which we have available for sale. Contact us for further details. • Capacity and Reach • Maximum turning diameter: ø 481 mm • Maximum turning length: 1,280–1,310 mm (depending on chuck) • Swing over bed: ø 780 mm • Bar capacity: ø 76 mm • Main Spindle Dksdpfx Ajy T Ndfjbgsp • Chuck diameter (face plate): 254 mm (10") • Spindle bore: ø 86 mm • Spindle nose: A2-8 • Tool Changer • Turret: 12 stations • Rapid traverse (X/Z): 30 m/min Additional Equipment • Note: Tools are not included (available at extra cost) Technical Specification Counter spindle: No Driven tools: No

Stanje: zelo dobro (rabljeno), INDEX ABC 65 je CNC stružno-glodalno-bušilni centar proizvođača INDEX, namenjen za visoku preciznost, tačnost i pouzdanost. Kapaciteti: 2 vretena, 2 revolvera; provrt vretena 65 mm; prečnik vretena 140/110 mm; hodovi Z300 X140 Y100 mm; pozicije revolvera 10/9 (zadnja strana 8). Podaci: glavna vreteno sa bessteppen regulacijom 0–6000 min⁻¹, 25/35 kW, obrtni moment 80/120 Nm; protivvreteno 6000 min⁻¹, 5/9 kW; pogonjeni alati 7.5/9 kW; prihvat osovine 45 mm; vreme promene 0,4 s; brzi hod X30/Z50 m/min; priključak 3x400 V 50 Hz; ukupna snaga 41 kW; težina oko 6500 kg; dimenzije 3600×1280×1950 mm. Oprema: rashladno sredstvo 300 l, visok pritisak 80 bar, papir filter, osvetljenje, prihvat za stezne čaure, USB, transportna traka, transporter strugotine, set držača alata. Postiže uske tolerancije; pogodno za automobilske, časovničarske, avio, medicinske i alatničarske aplikacije. Dksdpfxjy S Dfuj Abgjp

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, obratovalne ure: 34.434 h, - Polnilec Iemca MINI BOSS 325 CNC/32 - Transporter za ostružke CONVEYORS IND. ASS. Model: TMPF 1088 - Protipožarni sistem Kraft&Bauer (leto 2021) Dkedpfx Aoy Uffzobgsp Stroj je vedno deloval samo s polnim oljem, nikoli z vodno emulzijo. Delovne ure: 34.434

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 2.896 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 230 mm, pomik po osi Z: 580 mm, skupna višina: 1.700 mm, skupna širina: 1.628 mm, skupna masa: 3.600 kg, proizvajalec krmilnikov: FANUC, model krmilnika: i-series, največja dolžina izdelka: 2.834 mm, število osi: 3, This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min on the X-axis and 30 m/min on the Z-axis. If you are looking for a high-quality lathe, consider the horizontal lathe DOOSAN Puma GT 2100M we have for sale. Contact us for further details. • Swing over bed: 600 mm • Swing over saddle: 390 mm • Recommended turning diameter: 210 mm • Max. turning diameter: 300 mm • Max. turning length: 513 mm • Bar working diameter: 65 mm • Spindle nose: ASA A2-6 • Spindle bearing diameter (front): 110 mm • Spindle bore diameter: 76 mm • Minimum indexing angle of spindle (C-axis): 0.001° • Number of tool stations: 12 • OD tool size: 25 mm • Boring bar diameter: 40 mm • Indexing time (1st rotation): 0.15 s • Rotating tool spindle speed: 5,000 rpm • Rapid traverse (X-axis): 24 m/min • Rapid traverse (Z-axis): 30 m/min • Tailstock quill diameter: 80 mm • Tailstock quill taper (live): MT4 • Tailstock quill travel: 80 mm Dsdpfey Tx S Sjx Abgokp • Electrical power supply: 30.43 kVA Additional Equipment • None specified (no robots, automation, or bar feeder included) • Tooling excluded; available at extra cost Technical Specification Driven Tools: Yes Counter Spindle: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 1.652 h, največja hitrost vretena: 3.400 obr/min, potovalna razdalja osi X: 213 mm, pomik osi Y: 102 mm, pomik po osi Z: 572 mm, število osi: 4, Táto 4-osá HAAS ST-25Y bola vyrobená v roku 2019. Disponuje maximálnymi otáčkami vretena 3 400 ot/min a veľkosťou skľučovadla 254 mm. Stroj je schopný pracovať s poháňanými nástrojmi a maximálny priemer frézy je 298 mm. Ak hľadáte vysokokvalitný sústruh, zvážte nami ponúkaný horizontálny sústruh HAAS ST-25Y na predaj. Kontaktujte nás pre viac informácií. • Stroj je schopný pracovať s poháňanými nástrojmi • Veľkosť skľučovadla: 254 mm • Max. výkyv nad lôžkom: 533 mm • Maximálny priemer frézy (s revolverom BMT65): 298 mm • Maximálna dĺžka frézovania (v závislosti od upnutia obrobku): 572 mm • Kapacita pre podávanie tyčí: 76 mm • Pojezdy (metrické): • X-os: 213 mm • Y-os: ±51 mm • Z-os: 572 mm Doplnkové vybavenie • Náradie nie je súčasťou dodávky (možno dokúpiť za príplatok) Technické špecifikácie Dodpfxjy Txwho Abgskp Kontra-vreteno: Nie Poháňané nástroje: Áno

Stanje: rabljeno, Leto izdelave: 1998, obratovalne ure: 97.593 h, Funkcionalnost: popolnoma funkcionalen, premer struženja: 65 mm, izvrtina vretena: 79 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 25 obr/min, For sale: Gildemeister MF Sprint 65 CNC Lathe with 3-meter bar feeder, as shown in the pictures. The machine was dismantled from our workshop in fully functional condition. A video of the machine in operation prior to disassembly can be provided upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (main spindle side) were renewed, including bearings and belts. A new HMI interface was recently installed. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DETAILS Control: Sinumerik 840C Bar feeder: SIMAG 65.1-3200G, Year 1998 Bar length: 3 m Bar diameter/spindle bore: 65 mm Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Thread cutting rapid feed rate: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool turret Number of tools: 8 Shank Ø according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool turret 1 speed: max. 4,000 rpm Tool turret 2 speed: max. 4,000 rpm Slide 1 Cross travel / longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X: 15 × 25 mm Dsdpfxjwym Nfo Abgskp Ball screw pitch Z: 15 × 32 mm Slide 2 Cross travel / longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Ball screw pitch X/Z: 15 × 25 mm MACHINE DETAILS Dimensions incl. bar feeder and chip conveyor (L×W×H): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Coolant system - Chip conveyor - Documentation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 10.779 h, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 362 mm, pomik po osi Z: 1.250 mm, moč vretenovega motorja: 28.000 W, skupna masa: 6.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D SL, število mest v zalogovniku orodij: 12, število osi: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine is equipped with a 12-position disc turret and can be fitted with driven tools, increasing its versatility. If you are looking for a high-quality lathe, consider the DMG NEF 600 horizontal lathe we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-position disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant system with chip tray • Operating software: ShopTurn • Control panel: ERGOline control panel • CAD reader: Compatible with external PC • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Maximum draw tube diameter: 95 mm • Coolant spray gun: Supplied • Chip conveyor: Right side discharge • Discharge height of chip conveyor: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50-200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: 90° angled, driven tool holder • Tool spindle 2: Straight 0° tool mount • Tool spindle application: Drilling, milling, and thread cutting • Tool holder shank standard: DIN 69880-40 • Cooling unit for control cabinet: Up to 40°C • DMG Netservice onboard: Integrated OPTIONAL Approx. 100 various tool holders (VDI holders) Dkedpey Twc Nefx Abgjp Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: rabljeno, CNC stružnica GILDEMEISTER tip GD 160 z upravljanjem Gildemeister - Fanuc Mate TS - Hidravlična vpenjalna glava BERG Ø 200 mm - Revolverska glava za 12 orodij VDI 40 - 6 kos nosilcev orodij VDI 40, vgrajenih Tloris stroja s transporterjem ostružkov D x Š x V: 4200 x 2200 x 2100 mm Teža ca. 4 tone Delamo prostor Dedoy T R Iropfx Abgokp Ugodna stroj - Idealen za izvoz

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 18.955 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 203 mm, pomik osi Y: 82 mm, pomik po osi Z: 585 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.852 mm, skupna širina: 1.935 mm, skupna masa: 6.000 kg, Premer palice (maks.): 65 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TF, največja dolžina izdelka: 2.716 mm, število mest v zalogovniku orodij: 12, število osi: 4, Ta 4-osna stružnica NAKAMURA-TOME AS-200L je bila izdelana leta 2017. Ima maksimalni premer struženja 320 mm in dolžino struženja 570 mm. Stroj je opremljen z 12-pozicijskim revolverjem ter glavno vreteno z največjo hitrostjo do 4500 min⁻¹. Če iščete visoko kakovostne stružne zmogljivosti, razmislite o naši naprodaj horizontalni stružnici NAKAMURA-TOME AS-200L. Za več informacij nas kontaktirajte. Serijska oprema • Revolver: 12-pozicijski bobnasti revolver • CNC krmilje, 4 osi (vključno s C-osjo), Fanuc 0i-TF • Sistem za zaščito pred trkom (mehanski "zračni mehurček") • Y-os Djdjytqpnspfx Abgjkp • 15" LCD zaslon z USB priključkom • Pogonska orodja – 12 pozicij • Avtomatski centralni mazalni sistem • Osvetlitev delovnega območja • Črpalka za hladilno tekočino – 180 W • Prvo polnjenje s hladilnim sredstvom (Blaser) Vključene možnosti • Transformator • Luck-Beil II (NT Manual Guide – grafični uporabniški vmesnik za krmiljenje) • Povečana vretena odprtina na 71 mm (4500 min⁻¹; A2-6) • Zmogljivejši glavni vretenasti motor Fanuc 15 / 11 kW (258 Nm) • Visokotlačni hladilni sistem s črpalko Brinkmann • Zaporni ventil za visokotlačni hladilni sistem • Senzor nizkega nivoja hladilne tekočine • Izmetalni cilindri za obdelovanec na pomožnem vretenu (hod cilindra 100 mm) • Signalni stolp za status stroja (3 barve) • Odlagalna polica pod upravljalno konzolo • Posoda za sprejem kosov tip A (Ø 71 mm / L 150 mm / 3 kg) • Priprava za LNS podajalnik palic • Prepih zraka skozi glavno in pomožno vreteno • Ročni sonda za nastavljanje orodij (Renishaw, ena roka za obe vreteni) • Sistem hlajenja vretena za glavno in pomožno vreteno • Priprava za odstranjevanje oljne megle • Orodja ali držala za orodja niso vključeni v ponudbo Tehnične specifikacije Pomožno vreteno: Da Pogonska orodja: Da

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 2.322 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 235 mm, pomik po osi Z: 1.144 mm, skupna masa: 6.300 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P300L, število osi: 3, This 3-axis Okuma Genos L300E-M was manufactured in 2015. It features a maximum turning diameter of approximately 300 mm and a center distance of 1060 mm. The machine is equipped with driven tools and a C-axis, which enhances its versatility for various turning applications. If you are looking for a high-quality lathe, you should consider the Okuma Genos L300E-M that we are offering for sale. Please contact us for further details. • Control: OSP-P300L • Main spindle: Yes Dksdpoy S Sh Refx Abgsp • Driven tools: Yes • C-axis: Yes • Y-axis: No • Maximum turning diameter: approx. 300 mm • Distance between centers: 1060 mm • Coolant through driven tools • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50/60 Hz • Rated power: 22.4 kVA • Full load current: 33.5 A • Maximum motor power: 89 A • Short-circuit withstand: 2.5 kA • Chip conveyor: Yes • Oil mist extraction: Yes • Optional: possible accessories, including driven tools (5 pieces), all chucks, holders • Spindle operating hours: 2322 h Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Lathe TRAUB TNX 65/42 Year of Manufacture: 2009 Control System: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle installed since 04/26 Dkjdpfx Abjyw H Szogop ACCESSORIES - 3-color status lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts ejector - Parts belt conveyor

Stanje: dober (rabljeno), Deli, ki jih oseba kaže z roko, niso vključeni. Tehnični podatki so prikazani na sliki. Dkedpfswb Em Ssx Abgjp Orodja v leseni škatli so priložena stroju.

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Dkodpowb Eptsfx Abgep Orodja v leseni škatli so priložena stroju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 15.845 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6E182501, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 22 W, Stroj je zelo dobro ohranjen, 90% proizvodnje v uporabi ene osebe. Servisiran po priporočilih proizvajalca. Djdpfeyvtugox Abgskp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Krmiljenje MITSUBISHI M 700 Prehod palice 37,5 mm 2 x 12-pozicijski revolver z gnanimi orodji 2 x C-os Dkjdpfxey I Dilj Abgep 2 x Y-os Glavno / protivretensko vreteno FMB polnilnik palic turbo 3-36 Sistem za pripravo hladilne tekočine Knoll KF 10 Transportni trak za odrezke Renishaw merilna sonda Lovilec delov Transportni trak za končne izdelke Zračni filter 2 x vpenjalna glava za vpenjalne tule Nosilci orodja in vpenjalne tule

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 180 mm, pomik po osi Z: 42 mm, skupna višina: 1.650 mm, skupna masa: 1.200 kg, proizvajalec krmilnikov: FAGOR, model krmilnika: 8055tc, število osi: 2, Stroj Pinacho Smart Turn 180/42 1000 je bil izdelan leta 2012. Gre za robusten horizontalni stružni stroj z dolžino struženja 1000 mm, prehodom vretena 42 mm in stružnim premerom 360 mm. Opremljen je z 8-pozicijskim revolverjem in krmilnikom Fagor 8055tc. Dimenzije znašajo 2,5 x 1,15 x 1,65 m, teža pa približno 1,2 t. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Pinacho Smart Turn 180/42 1000. Za dodatne informacije nas kontaktirajte. Dkedpfx Asx D Ivfjbgop • Stružni premer: 360 mm • Dolžina struženja: 1000 mm • Revolver: 8-pozicijski vdi20 • Stroj je še pod napetostjo • Vpenjalna glava: premer 200 mm. Dimenzije Globina stroja: 2500 mm Tehnične specifikacije Pogonska orodja: Ne Proti-vreteno: Ne

Stanje: rabljeno, Leto izdelave: 2015, obratovalne ure: 24.952 h, CMZ TA 20 Y-400 Oscillationa peste pat / sanie: 760 / 600 mm Diametru maxim de strunjire: 460 mm Distanța ax – set roți: 473 mm Deplasări X / Y / Z / B: 310 / +70 / −50 / 640 / 640 mm Avans rapid X / Z / B: 30 m/min Avans rapid Y: 15 m/min Broșă principală: Viteză maximă: 4.000 rpm Putere: 22 / 15 kW la 366 / 286 Nm Rulment exterior/interior: 150 / 100 mm Alezaj ax: 73 mm Trecere bară: 66 mm Diametru mandrină: 210 mm Contra-punct: Cursă: 400 mm Revistă port-scula: 12 posturi, toate acționate Viteză maximă: 12.000 rpm Putere: 11,3 / 8,1 kW Cuplu max.: 75 Nm Control CNC: FANUC 32i TB Tensiune: 400 V / 50 Hz Dksdpfxoymc U Aj Abgjp Putere instalată: 45 kVA Dimensiuni: aprox. L x l x h 2,5 x 1,8 x 2,1 m Greutate: aprox. 6 t Ore funcționare: aprox. 24.952 ore Livrare: Încărcător bare IEMCA KID 80/16, an 2018 Unitate răcire

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 14.129 h, CMZ TA 20 YS-640 Swing over bed / slide: 760 / 600 mm Maximum turning diameter: 460 mm Distance from main to sub spindle: 649 mm Axis travel X / Y / Z / B: 310 / +70 / −50 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing diameter outside / inside: 150 / 100 mm Spindle bore: 73 mm Dkedpfxeymc Sbo Abgep Bar capacity: 66 mm Chuck diameter: 210 mm Turret: 12 stations, all with drive Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Sub spindle: Maximum speed: 4,500 rpm Power: 14 / 8 kW at 292 / 153 Nm Bearing diameter outside / inside: 150 / 100 mm Spindle bore: 61 mm Bar capacity: 52 mm Chuck diameter: 175 mm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions: approx. L x W x H 2.5 x 1.8 x 2.1 m Weight: approx. 6.3 t Operating hours: approx. 14,129 hours Scope of delivery: Bar feeder BREUNING IRCO SiMag 80.1-R-3000 II, year of manufacture 2015 Coolant unit

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 380 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP‑P200LA‑R, število osi: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-position turret with live tooling, enabling milling and drilling operations on the C-axis. If you are looking for high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we are offering for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C-axis; no Y-axis • Tailstock: Equipped • Tool presetting device: Automatic tool presetting device installed • Turret: 12-position turret with live tooling (milling and drilling on the C-axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2-6 • Spindle bore diameter: approx. 50 mm Dodpfx Aey Rrwvebgjkp • Electrical connection: 380 V, 3 phase, 50/60 Hz • Apparent power rating: 17.7 kVA • Full load current: 26.7 A • Maximum motor current: 45 A Technical Specification Counter Spindle No Driven Tools No

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 901, vrsta vhodnega toka: trifazni, Premer palice (maks.): 40 mm, vrtina vpenjalnega tuleca: 42 mm, Ponujamo rabljeni CNC stružni stroj Mori Seiki SL-150S/500 s podvretenom, letnik 1998. proizvajalec: Mori Seiki model: SL-150S/500 serijska številka: 901 faze: 3 nazivna moč: 32 kVA datum proizvodnje: 9/1998 Vključen podajalnik palic LNS Quick Load Servo 65 (leto 2007). Dodezdd Dyepfx Abgjkp Vključene redukcijske cevi. Vključen Hainbuch vpenjalni sistem (glavno in podvreteno imata enako dimenzijo vpenjalne glave za hainbuch BZI 42). Vključenih 120 vpenjalnih tulec. Vključeni vpenjalni bloki za revolversko glavo. Orodja niso vključena. Stroj je še vedno v proizvodnji in mora narediti prostor za novega. Stroj je dobro vzdrževan. Pozor, to je stroj brez pogonskega orodja! Za dodatna vprašanja ali več informacij nam pišite.

Stanje: rabljeno, Leto izdelave: 2013, Maximum turning diameter: 20 mm Maximum turning length: 80 mm Control: Fanuc 310is Maximum usable bar diameter: 20 (25) mm Draw tube internal diameter: 28.5 mm Maximum spindle speed: 10,000 rpm Spindle drive power: 3.7 kW Maximum torque: 9.4 Nm C-axis C1: 360° Draw tube internal diameter: 28.5 mm Maximum spindle speed: 10,000 rpm Spindle drive power: 3.7 kW Maximum torque: 9.4 Nm C-axis C2: 360° X-axis travel 1: 50 mm / 2: 240 mm Y-axis travel 1: 350 mm / 2: 120 mm Z-axis travel 1: 80 mm / 2: 300 mm Number of tool stations: 17 positions Internal machining: 6 positions External machining: 6 positions Driven tool stations: 5 positions Tool shank diameter: 20 mm Tool shank cross section: 12 x 12 mm Collet diameter ESX / ER: 16 Driven tool speed: 3x 3,450 / 2x 6,000 rpm Drive power for driven tool stations: 5x 0.98 kW Maximum torque: 3x 4 / 2x 2.3 Nm Number of tool stations: 13 positions Internal machining: 4 positions External machining: 4 positions Driven tool stations: 5 positions Tool shank diameter: 20 mm Tool shank cross section: 12 x 12 mm Collet diameter ESX / ER: 16 Driven tool speed: 3x 3,450 / 2x 6,000 rpm Drive power for driven tool stations: 5x 0.98 kW Maximum torque: 3x 4 / 2x 2.3 Nm Rapid traverse (X / Y / Z): max. 40 m/min Djdpfx Aotqmnnsbgskp Max. feed force: 2.5 kN Maximum acceleration: 5 m/s² Total connected load: 56 kVA Machine weight: approx. 4.8 t Required space: approx. 8.0 x 2.5 x 2.0 m CNC Short-Turning Lathe GILDEMEISTER - Sprint 20-8 - 8 axes (2x X / 2x Y / 2x Z / 2x C) - Main and counter spindle - Bar loading magazine FMB turbo 3-36/3200A - DELTATHERM coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 230 mm, pomik po osi Z: 520 mm, skupna masa: 4.100 kg, število osi: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It offers a maximum X-axis travel of 230 mm and a Z-axis travel of 520 mm. The machine is equipped with a hydraulic clamping system, a chip conveyor, and several driven tool holders to enhance machining capabilities. If you are looking for high-quality turning operations, consider the MORI SEIKI SL-153 SMC horizontal lathe we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Includes foot pedal • Interface for automatic bar feeder likely installed • Tooling and supplied holders • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for sub-spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for hydraulic clamping accessories Schunk TendoTurn DSE (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with bores Ø25 mm and Ø32 mm • Accessories for direct mounting of square shank tools to the turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 Dkedpfey N Shlox Abgjp • Suitable for BA and BD collets size 52 • Suitable for main and sub-spindle • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor rated current: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported to be functional prior to removal • Available for inspection Additional Equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year of manufacture: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: According to the seller, compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never used with this lathe • Condition: Reported as functional Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, največja hitrost vretena: 3.800 obr/min, potovalna razdalja osi X: 280 mm, pomik po osi Z: 500 mm, moč vretenovega motorja: 22.000 W, število osi: 5, This 5-axis Okuma LB 300M X 500 was manufactured in 2012. It offers a maximum turning diameter of 340 mm and a turning length of 480 mm. The machine is equipped with a powerful spindle speed range of 45 - 3,800 rpm and a robust 12-station turret. If you are looking for a high-quality lathe, consider the Okuma LB 300M X 500 horizontal turning center we have for sale. Please contact us for further details. • CNC: OSP U100L • Maximum turning diameter: 340 mm • Maximum turning length: 480 mm • Distance between centers: 500 mm • C-axis: 360° (0.001° increments) • Rapid traverse: X 20,000 mm/min; Z 25,000 mm/min • Spindle nose: ASA 6 • Bar capacity: 65 mm • Driven tools: 45–4,500 rpm; 3.3 kW • Turret: V 12 NCM (12 stations); VDI 40 • Tool section: 25 mm (square) / 40 mm (boring bar) • Tailstock: Quill Ø 90 mm; travel 120 mm; taper MT5 • Certification: CE certified with manuals Additional Equipment • Kitagawa B208 chuck • Chip conveyor • High-pressure coolant pump • Robot interface • Automatic door • Air blower • Driven tool holder • 4 radial driven tools • 4 axial driven tools Technical Specification: Taper size: VDI 40 Dkodpfx Asy N Sabsbgop Counter spindle: No Driven tools: Yes

Stanje: dober (rabljeno), EMCOTurn 120 CNC lathe. 160 mm between centers, complete with EMCOTronic T1 control system. Swing diameter: 180 mm, swing diameter over cross slide: 75 mm, spindle bore: 21 mm, speed range: 150–400 rpm, 8-station tool turret. Ex-college machine. Dkedpeu Rd S Rjfx Abgsp