CNC stružnice 0–199 mm premer struženja nakup rabljenega (273)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, največja hitrost vretena: 6.000 obr/min, moč vretenovega motorja: 11.100 W, skupna masa: 3.500 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-T, število osi: 2, Stroj DAEWOO Puma 160 je bil proizveden leta 2004. Robustni horizontalni stružnica je opremljena z upravljalnikom Fanuc 0i-T in omogoča struženje premerov do 160 mm ter dolžin do 250 mm. S hitrostjo vretena do 6000 min⁻¹ in glavno močjo motorja 11,1 kW je idealna za natančno obdelavo. Teža stroja znaša od 3.000 do 3.500 kg. Za več informacij o stroju nas kontaktirajte. Dodatna oprema • V ponudbi je vključena: Izbor orodij. Hjdpfxoyar Eqo Adkoni Prednosti stroja Tehnične prednosti • Premer struženja: do 160 mm • Dolžina struženja: do 250 mm Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 352 mm, pomik po osi Z: 1.105 mm, moč vretenovega motorja: 35.000 W, proizvajalec krmilnikov: FANUC, število osi: 2, This horizontal lathe, DOOSAN PUMA 4100 B, was manufactured in 2019. It offers a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it delivers efficient machining capabilities. If you are looking for a high-quality lathe, you should consider the DOOSAN PUMA 4100 B machine that we offer for sale. Contact us for further details. • Swing over bed: 790 mm • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm • Maximum turning length: 1,042 mm • Bar capacity: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid traverse X axis: 16 m/min • Rapid traverse Z axis: 20 m/min • Quill diameter: 120 mm • Motorised quill taper: MT#6 • Quill travel: 120 mm Hnodpfxjyhdbge Adkoi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 205 mm, pomik osi Y: 30 mm, pomik po osi Z: 340 mm, moč vretenovega motorja: 15.000 W, skupna višina: 1.693 mm, skupna širina: 1.595 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F Plus, največja dolžina izdelka: 2.350 mm, število osi: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. Like new, showroom model. It features a maximum spindle speed of 4,500 rpm and an 8" (204 mm) chuck size. The machine is equipped with a 12-station tool turret and has a bar capacity of 65 mm. If you are looking for a high-quality lathe, you should consider the DN SOLUTIONS LYNX 2100MB horizontal turning center we have for sale. Contact us for more details. • As new, showroom model Hodpoyrt E Njfx Adkeni • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • Y-axis travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: 7 bar coolant pump • Design: High-performance compact turning center in space-saving construction • Productivity: Fast auxiliary times; tool turret with BMT interface • Application: Suitable for the production of small parts with high precision Additional Equipment • Interface for bar feeder • Chip conveyor • Parts catcher • Tool setter (electrical) • Oil skimmer • 3-color signal beacon Technical Specification Counter spindle: No Driven tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, največja hitrost vretena: 3.400 obr/min, število osi: 4, Ta 4-osni horizontalni stružni stroj HAAS ST-30Y je bil izdelan leta 2020. Opremljena je z osmi C+Y, A2-6 vretenom z 3.400 vrt./min in BMT65 revolversko glavo z 12 postajami. Stroj ima avtomatski pripravnik orodij, ukrivljen transporter odrezkov in programirljivo konjiček. Stroj je mogoče ogledati pod napetostjo, preizkusni rezi so možni na zahtevo. Za več podrobnosti nas kontaktirajte. • Delovne ure: 556 h • Os C+Y • A2-6 vreteno z 3.400 vrt./min • 12-postajna revolverska glava BMT65 • Programirljiv konjiček Hnsdpfjyh Hw Iox Adkoi Dodatna oprema: • Ukrivljen transporter odrezkov • Oljni strgalo • Odsesovalna naprava • Avtomatski pripravnik orodij (ATP) • WIFI kamera • Daljinsko upravljan ročaj

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 2.500 obr/min, skupna višina: 1.785 mm, skupna masa: 3.850 kg, število osi: 2, This Weiler E50 was manufactured in 2009. It is a robust horizontal lathe featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. The machine offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Please contact us for more information about this machine. Machine Advantages Qualitative Advantages • Front spindle bearing diameter: 120 mm • Spindle bore: 83 mm • Main spindle taper: Metric 90 • Longitudinal and cross feed range: 0-20 mm/revolution • Longitudinal feed force: 10,000 N • Cross feed force: 7,000 N • Rapid traverse (longitudinal/cross): 10/7 m/min or 5/3.5 m/min • Metric threads: 0.1-400 mm • Inch threads: 1/4" - 56 tpi to 1" • Module threads: – Technical Advantages • Drive power (60% / 100% duty cycle): 20/17 kW • Max. spindle torque: 1,600 Nm • Gear range I: 1-625 rpm • Gear range II: 4-2,500 rpm • Bed width: 350 mm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: MK 5 • Tool cross-section (height/width): 32 x 25 mm • Spindle nose according to DIN 55027: Size 8 Additional Information Machine still connected to power supply/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Travelling steady rest clamping range: 12- mm/ The machine has been running efficiently in single-shift operation since purchase/ A chuck incl. hard and several sets of soft jaws as well as the tailstock can be supplied as accessories/ Related tools can be discussed in the event of an order. The machine’s footprint is 2.8m x 5.2m, which includes a 600mm operator area within the 2.8m depth/ Hodpox D Ibbofx Adkjni All manuals are available. Dimensions Machine Depth: 3,250 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 5.137 h, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 202 mm, pomik po osi Z: 450 mm, moč vretenovega motorja: 12.000 W, skupna višina: 1.730 mm, skupna širina: 1.563 mm, skupna masa: 3.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D powerline, največja dolžina izdelka: 4.000 mm, število osi: 3, This 3-axis Gildemeister CTX 310 was manufactured in 2003. It features a maximum turning diameter of 246 mm and a turning length of 445 mm. The machine is equipped with a spindle power of 12 kW and a maximum spindle speed of 6000 rpm. If you are looking for a high-quality lathe, you should consider the Gildemeister CTX 310 horizontal turning machine we have for sale. Contact us for further details. • Availability: 2 units available • Spindle Hsdpfx Adsympcaskoni • Nose: FL 140 h5 • Maximum torque: 115 Nm (153 Nm at 40% S6) • Bore: 69 mm • Chuck diameter: 170 mm (optionally 210 mm) • Bar capacity: Ø 50 mm • Working area • Swing over bed: 500 mm • Maximum turning diameter: 246 mm • Maximum turning length: 445 mm • Distance between centres: 600 mm • Turret and tools • Turret type: VDI 30 • Tool stations: 12 • Driven tool speed: 4200–5000 rpm (depending on control: Fanuc/Siemens/Heidenhain) • Driven tool power: 3.3–4.4 kW • Feed and axes data • Rapid traverse (X/Z): 24/30 m/min • C-axis rapid traverse: 100 rpm • Feed force (X/Z): 450 daN • Resolution (X/Z): 0.001 mm • Bed • Inclination: 45° • Material: cast iron • Electrical and auxiliary equipment • Supply voltage: 400 V (±10%), 50 Hz • Total installed power: 24 kVA • Hydraulic system pressure: 50 bar • Coolant tank capacity: 175 litres • Control systems (options): GE-FANUC 21i-TB, Siemens 840D, Heidenhain 4290 E Additional equipment • Chip conveyor (both units) • Extraction system (one unit)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 2.084 h, največja hitrost vretena: 4.000 obr/min, moč vretenovega motorja: 25.500 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D SL with ShopTurn, število osi: 3, This 3-axis DMG CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4,000 rpm, and a sub spindle reaching 5,000 rpm. The machine is equipped with a 12-position servo turret with live tooling stations and a Y-axis travel of ±60 mm. If you are looking for a high-quality lathe, you should consider the DMG CLX 450 V6 that we offer for sale. Contact us for more information. Hnsdpfex E D Uvox Adkji • General configuration: CNC turning center with X, Z, and C axes; Y-axis ±60 mm; sub spindle; live tooling • Control panel: DMG MORI SLIMline multitouch, 19″ • Control system: Siemens 840D SL with ShopTurn • Main spindle: A2-8"; 17/25.5 kW (100%/40% DC); max. 4000 rpm; through-spindle clamping; max. bar capacity Ø 80 mm • Sub spindle: A2-6"; integrated motor spindle ISM 52; 13/14 kW (100%/40% DC); max. 5000 rpm; non-through clamping • Turret: 12-position servo turret, VDI 40; 12 live tooling stations (DIN 5480 coupling); possibility to mount 6 BT tool holders on the turret circumference; TRIFIX precision coupling • Measuring systems: Direct measuring systems in X, Y, Z (Z with optional air purge) • Axes and performance: Y-axis stroke ±60 mm; C-axis on both spindles; high-precision 45-mm linear roller guideways; increased rigidity for heavy-duty turning Additional equipment • Chip conveyor (discharge to the right) • Coolant gun, 5 bar • Optional high-pressure coolant system • Optional AFS 600 oil mist extractor, 600 m³/h, filtration class H13 • Manual tool setter (MARPOSS) • Optional direct measuring system for Z-axis with air purge • Option Y-axis grooving cycle (V4/V6) • Pressure-differential clamping for main spindle • External chuck flushing (main and sub spindle) • 4-color signal tower • Setup package included (C-P7223F) • The machine is ready for connection to a bar feeder.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 470 mm, pomik po osi Z: 3.250 mm, moč vretenovega motorja: 75.000 W, skupna masa: 21.500 kg, število osi: 3, Ta 3-osni DOOSAN PUMA 600LM je bila izdelana leta 2007. Opremljena je z 45° nagnjenim ležiščem iz litega železa in prizmatičnimi vodili z drsnim materialom Rulon 142. Vreteno omogoča razpon vrtljajev od 15 do 1.800 min⁻¹ in največji navor 9.025 Nm. S prehodom palice 152 mm in kontinuiranim vrtenjem C-osi ne zamudite priložnosti za nakup tega horizontalnega stružnega centra DOOSAN PUMA 600LM. Za dodatne informacije nas kontaktirajte. Hnjdpsyi Uwbofx Adksi • Vodila: prizmatična z drsnim materialom Rulon 142 • Vreteno: • Priključek: ASA A2-15 • Največji navor: 7.220 / 9.025 Nm • Kapaciteta palice: 152 mm • C-os: kontinuirano interpolirana, ločljivost 0,001° • Osi: • Število osi: 3 (X, Z, C) • Vrtenje C-osi: ±360° neprekinjeno • Podajalne hitrosti: • Hitri pomik X-os: 12 m/min • Hitri pomik Z-os: 10 m/min • Največji interpolirani podajalni pomik: 500 mm/obrat • Premer krogličnih vreten: Ø 50 / 63 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, potovalna razdalja osi X: 300 mm, pomik po osi Z: 3.120 mm, število osi: 2, Horizontalni stružnica iz leta 2016. Ta DOOSAN Puma 3100 ULY je zasnovana za natančnost z največjo dolžino struženja 3.100 mm in maksimalnim premerom struženja 420 mm. Opremljena je z revolverjem za orodja s 12 pozicijami in premerom spindelskega vpenjala 315 mm. Če iščete visokokakovostno stružnico, priporočamo, da razmislite o modelu DOOSAN Puma 3100 ULY, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Največja dolžina struženja: 3.100 mm Hedjyk U A Hjpfx Adkoni • Največji premer struženja: 420 mm • Največji premer prehoda palice: 102 mm • Premer spindelskega vpenjala (glavno vreteno): 315 mm • Revolver za orodja: 12 pozicij • Moč poganjanega orodja: 7,5 kW • Število osi: 2 (X, Z) Dodatna oprema • Visokotlačni sistem: 10 bar • Avtomatska prednastavitev: Da • Transporter za ostružke: tračni tip

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 260 mm, pomik po osi Z: 590 mm, moč vretenovega motorja: 11.000 W, skupna višina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 2.900 mm, število osi: 3, This 3-axis DMG Mori Seiki NLX1500MC/500 horizontal turning center was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, an X-axis travel of 260 mm, and a Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret equipped with 12 driven stations, this DMG Mori Seiki NLX1500MC/500 offers an excellent purchasing opportunity. Contact us for further details. • Operating hours: 11,996 • CNC control: MAPPS M730BL • Max. turning diameter without interference: 366 mm • C-axis: 360,000° • Turning length: 515 mm • Spindle nose: A2-5" • Spindle bore: 61 mm • Bar capacity: Ø 52 mm • Turret: 12 stations (all driven), index time 0.25 sec • Driven tools: 6,000 rpm, 5.5 kW • Programmable tailstock (B-axis), travel 564 mm • Coolant pump • Oil cooler • Electronic handwheel • 3-color status beacon • Air-conditioned electrical cabinet • Condition/Availability: Machine in excellent condition; outstanding appearance; very good; videos available; immediately available Additional equipment • Chip conveyor • Bar loader interface • Bar feeder magazine: SAMSYS MULTI-3000 (short bar, 1,000 mm) • Hydraulic chuck: KITAGAWA BB208, Ø 165 mm • Collet chuck: HAINBUCH COMBI TOPlus size 65 • HAINBUCH collets: Ø 6.5 - 10 - 16 - 18 - 20 - 25 - 26 - 30 - 40 mm • Square collets: 20×20 - 35×35 - 40×40 mm • Hex collet: 14 mm • Tool-setting probe arm • 7 driven tool holders (3 axial, 4 radial) • 15 static tool holders • Parts catcher • Automatic door opening/closing • Isolation transformer • Documentation and CD-ROM • Clamping brackets for transport and handling Hnedeyg Iclepfx Adkoi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, največja hitrost vretena: 16.000 obr/min, moč vretenovega motorja: 46.000 W, skupna višina: 2.700 mm, skupna masa: 11.000 kg, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 640, največja dolžina izdelka: 5.200 mm, število osi: 2, Ta WAGNER WDE 800x2000 je bila izdelana leta 2010. Gre za robusten horizontalni stružni stroj, ki nudi zanesljivo delovanje za različne obdelovalne naloge. Idealna izbira za vse, ki želijo razširiti svoje zmogljivosti struženja. Za več informacij nas kontaktirajte. • Revolverska glava: 30 pozicij za orodje • Prednosti stroja: • Visokonatančne možnosti obdelave • Robusna in zanesljiva konstrukcija za konstantno zmogljivost Hsdpsybv Dtsfx Adkoni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 265 mm, pomik po osi Z: 680 mm, skupna višina: 1.755 mm, skupna masa: 5.800 kg, proizvajalec krmilnikov: FANUC, model krmilnika: Series, največja dolžina izdelka: 3.400 mm, število osi: 2, This Hyundai Wia HD 2600 horizontal lathe was manufactured in 2025. It offers a swing over bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports speeds up to 3,500 rpm and motor power of 26/18.5 kW. It is equipped with a 10-position turret and rapid traverse rates of 24/30 m/min. If you are looking for a high-quality lathe, you should consider the Hyundai Wia HD 2600, which we are offering for sale. Contact us for further information. • Original packaging Capacity • Swing over bed: 630 mm • Swing over carriage: 460 mm • Max. turning diameter: 460 mm • Max. turning length: 659 mm • Bar capacity: 80 mm • Chuck size: 10" Spindle: • Spindle bore: Ø91 mm • Motor (max/cont.): 26/18.5 kW (35/25 HP) • Torque (max/cont.): 734/522 Nm (541/385 lbf-ft) • Additional torque spec: (828/748 Nm) • Spindle type: Belt drive • Spindle nose: A2-8 • C-axis indexing: 0.001° Feed: • Rapid traverse rate (X/Z): 24 / 30 m/min (945 / 1,181 ipm) • Slide type: Box guideway Turret / Tooling • Number of stations: 10 (12) • Tool size (OD): 25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.15 sec Tailstock • Type: MT#5 (Built-in tailstock – MT#4) • Quill diameter: Ø100 mm • Quill stroke: 120 mm • Travel: 680 mm Hnsdpfeycvwcjx Adkei Tank Capacity • Coolant tank: 180 L (47.6 gal) • Lubrication tank: 18 L (4.75 gal) Power Connection • Electrical supply: 27 kVA • Power cable thickness: Over 16 mm² • Voltage: 220/60 (200/50)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 57.600 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 210 mm, pomik po osi Z: 550 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 828D, število osi: 2, Ta Hyundai Wia L210LA je bila izdelana leta 2013. Ima hitrost vretena 4000 min⁻¹, X-hod 210 mm, Z-hod 550 mm, največji stružni premer 350 mm in največjo stružno dolžino 530 mm. Opremljena je s transporterjem za ostružke. Izkoristite priložnost za nakup tega horizontalnega stružnega stroja Hyundai Wia L210LA. Za več informacij nas kontaktirajte. • Najvećji stružni premer: 350 mm • Največja stružna dolžina: 530 mm • Na voljo: 2 Dodatna oprema Hsdpfeyffptsx Adkoni • Transporter za ostružke

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, število osi: 2, Ta Gildemeister MF twin 65 je bila izdelana leta 1996. Opremljena je z dvema revolverskima glavama, vsaka z 12 orodnimi postajami, ki so vse lahko motorizirane. Vključuje 14 pogonskih orodij in 14 držal za orodje. Stroj ima obe vreteni v zelo dobrem stanju in prehodnost palic 65 mm, dopolnjeno z avtomatskim podajalnikom palic Cucchi Pietro. Za več informacij o stroju nas kontaktirajte. • 2 revolverski glavi (12 + 12 orodnih postaj), vse motorizirane • Prehodnost palic: 65 mm Hedpoyaqr Aefx Adkeni • Obe vreteni v zelo dobrem stanju • Nova hidravlična/pogonska črpalka Dodatna oprema • Avtomatski podajalnik palic Cucchi Pietro • 14 pogonskih orodij • 14 držal za orodje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, proizvajalec krmilnikov: FANUC, število osi: 2, Ta Pinacho STH 400-105×3000 je bila izdelana leta 2017. Gre za robusten horizontalni stružni stroj s premerom obrata nad posteljo 400 mm in razdaljo med konicama 3000 mm. Opremljena je z vretenom z visokim navorom in CNC krmiljenim pomikom za natančno težko struženje. Idealna za obdelavo gredi, cevi in prirobnic. Razmislite o možnosti nakupa tega horizontalnega stružnega stroja Pinacho STH 400-105×3000. Za več informacij nas kontaktirajte. Hedjybbiuepfx Adkeni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, moč vretenovega motorja: 35.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, Ta 4-osni SPINNER TC 110 je bil proizveden leta 2007. Kot horizontalni stružnica ponuja robustno zmogljivost za precizna opravila. Idealna izbira za vse, ki iščejo zanesljive stružne funkcije. Za več informacij nas kontaktirajte. TC110 ima Profi-Bus napako, ki jo je povzročila okvarjena dodatna oprema • Število pogonskih orodij: 12 Prednosti stroja Tehnične prednosti stroja • Maksimalna dolžina struženja: 1000 mm Hnsdpfsx D H Akex Adkei • Maksimalni premer struženja: 300 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, proizvajalec krmilnikov: MITSUBISHI, število osi: 3, Ta 3-osni stroj MORI SEIKI NL 2000 SY/500 je bil izdelan leta 2005. Gre za horizontalni stružni stroj z BF-vmesnikom in pogonskimi orodji ter menjalnikom orodij na obeh vretenih. Če iščete visoko kakovostne stružnice in rezkalne stroje, razmislite o stroju MORI SEIKI NL 2000 SY/500, ki ga imamo na voljo za prodajo. Kontaktirajte nas za več informacij. Prednosti stroja Tehnične prednosti stroja Hjdpfeyaim Ejx Adkeni • Pogonska orodja so priložena • Nastavitev orodij na obeh vretenih Dodatne informacije Stroj je še vedno priključen na električno omrežje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 4.200 obr/min, moč vretenovega motorja: 22.000 W, skupna masa: 6.200 kg, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP P200-L, število osi: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a 22 kW main spindle motor. The machine is equipped with a hydraulic and programmable tailstock, a 250 mm chuck, and a bar capacity of 75 mm. If you are looking for a high-quality lathe, you should consider the Okuma LB 3000 MY we offer for sale. Contact us for more information. Additional Equipment Hnodpfx Adoyaiq Dsksi • Includes oil cooler for the spindle • Side-mounted chip conveyor (hinged belt type) • Dual foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and wiring diagrams Machine Advantages Technical Machine Advantages • Torque: 620 Nm • Spindle nose: A2-8 • Bar capacity: 75 mm • Chuck: 250 mm SMW Autoblok with quick jaw change • Swing diameter: 520 mm • Maximum turning diameter: 380 mm • Maximum turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0.2 seconds • Equipped with static and driven tool holders Additional Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tools speed: up to 4,000 rpm Currently in operation

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 40.396 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D powerline, Ta DMG Gildemeister CTX410 je bila izdelana leta 2006. Opremljena je z maksimalnim številom vrtljajev vretena 5.000 vrt/min, revolverskim držalom z 12 pozicijami ter pogonskimi orodji na 3 pozicijah. Premer prehodne izvrtine je 65 mm. Razmislite o nakupu tega horizontalnega stružnega stroja DMG Gildemeister CTX410. Za dodatne informacije nas kontaktirajte. • Revolverski nosilec orodij: 12 pozicij • Pogonska orodja: 3 pozicije • Tip držala orodja: VDI 40 Hnsdpfxjx U S Ens Adkei • Prehodna izvrtina: 65 mm • Dobavni rok po dogovoru

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 22.491 h, največja hitrost vretena: 1.800 obr/min, potovalna razdalja osi X: 410 mm, moč vretenovega motorja: 37.000 W, skupna višina: 1.930 mm, skupna širina: 2.120 mm, skupna masa: 5.500 kg, največja dolžina izdelka: 4.250 mm, število osi: 2, Horizontal lathe from 2008. The Weiler E70 / 2000 features a swing-over bed of 720 mm and a maximum workpiece weight of 2,500 kg. It is equipped with a steady rest, tailstock, and faceplate, making it highly versatile. With a spindle speed range of 1 – 1,800 rpm and a robust main drive power of 37 kW, this machine is designed for precision. If you are looking for a high-quality lathe, you should consider the Weiler E70 / 2000 that we are offering for sale. Contact us for further details. • Working area and capacities: Hodjyn Nxkopfx Adkeni • Swing over bed: 720 mm • Swing over cross slide: 430 mm • Centre height: 360 mm • Distance between centres: 1,000 / 2,000 / 3,000 / 4,000 / 6,000 mm • Bed width: 480 mm • Maximum workpiece weight (unsupported): 2,500 kg • Maximum workpiece weight (with steady rest): 3,800 kg • Spindle and headstock: • Spindle bore (standard): 106 mm • Spindle bore (options): 128 / 165 / 216 / 262 / 317 mm • Spindle nose: DIN 55027 size 11 • Maximum spindle torque: 3,150 Nm • Feeds and travels: • Z-axis rapid traverse: 10,000 mm/min (10 m/min) • X-axis rapid traverse: 5,000 mm/min (5 m/min) • Feed force (Z): 20,000 N • Feed force (X): 10,000 N • Tailstock: • Quill diameter: 115 mm • Quill stroke: 225 mm • Taper: MK 6 (Morse taper) • Thread cutting capabilities: • Metric threads: 0.1–400 mm • Inch threads: 1/4–56 TPI • Module threads: 0.125–28 mm • DP threads: 1–224 DP • Operating hours: 22,491 h Additional equipment: • Steady rest • Tailstock • Faceplate

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 12.244 h, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 230 mm, pomik po osi Z: 740 mm, moč vretenovega motorja: 11.000 W, skupna višina: 1.620 mm, skupna masa: 4.200 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D-SolutionLine, število osi: 2, This 2-axis horizontal lathe SPINNER TC 600-65MC was manufactured in 2015 and is equipped with a Siemens 840D control system and a 16-position tool turret. It features a main spindle with speeds up to 4,000 rpm and an output of 24 kW. The machine offers a swing over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to purchase this horizontal lathe SPINNER TC 600-65MC. Please contact us for further information regarding this machine. Additional Equipment • Full splash guard enclosure + coolant system • Work area lighting + pneumatic equipment • Panoramic window for optimal view of the work area Machine Advantages Technical Machine Advantages • Axis distance: approx. 600 mm • Maximum turning diameter: 310 mm • Torque: main spindle (Fanuc, S6 40%) 178 Nm, main spindle (Siemens, S6 40%) 301 Nm • Quill stroke: 120 mm • Travel: 475 mm • Rotating tools speed: 6,000 rpm • Driven tool power: (Fanuc, 30 min) 3.7 kW, (Siemens, 40%) 6.0 kW Additional Information Media Hnsdpfox D E Hnsx Adkoi Pneumatics max. operating pressure: 10 bar Nominal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Control system: Standard Siemens 840D, option Fanuc 21i Operating voltage: 400 V Network frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feeder (electric)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 4.500 obr/min, skupna masa: 3.120 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TC, This Monforts TNC 300 SingleTurn was manufactured in 2009. It is a robust horizontal lathe equipped with a Fanuc 0i-TC control system, 10 tool stations, and a Kitagawa 8'' three-jaw power chuck. The machine features a hydraulic hollow clamping device and a chip conveyor, making it ideal for high-quality turning operations. Contact us for further information about this machine. Additional Equipment • Kitagawa 8'' (200 mm) three-jaw power chuck • Hydraulic hollow clamping device (diameter 52 mm) • Hinged belt chip conveyor • Coolant system: 10 bar • One handwheel • CRL-42-A6 collet chuck (diameter 42 mm) • Automatic tool measurement • Short bar loader for bar length: 1200 mm Machine Advantages Technical Machine Advantages • Max. torque: 124 Nm • Rapid traverse X-axis: 30 m/min / rapid traverse Z-axis: 30 m/min • Positioning accuracy: ±0.005 mm / repeatability: ±0.002 mm • Swing diameter over bed: 480 mm / turning diameter over cross slide: 320 mm / turning length: 500 mm • Number of tool stations: 10 / VDI size: 30 / shank diameter: 30 mm • Tailstock quill diameter: 65 mm / quill stroke: 50 mm / tailstock traverse: 425 mm / quill internal taper: MT4 • Quill internal taper: MT4 / max. bar capacity: 52 mm • Spindle diameter in front bearing: 100 mm / spindle center height: 900 mm Hnodsx D D U Djpfx Adksi Dimensions Machine depth: 2780 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, obratovalne ure: 11.111 h, največja hitrost vretena: 4.000 obr/min, proizvajalec krmilnikov: HAAS, model krmilnika: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal lathe featuring a 210 mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum workpiece size of 330 x 572 mm and bar stock diameters up to 64 mm. Ideal for precision turning applications. Contact us for further information about this machine. Additional Equipment • Additional options: Driven tools with 4,000 rpm and C-axis, 12-station BMT65 turret, automatic tool presetter Hedpfjx D Ezfsx Adksni • Features: Hinged belt chip conveyor, part catcher for turned parts • Cooling system: 208 l coolant tank, variable coolant flow • Further features: Visual part programming system (1GB), hydraulically actuated 210mm chuck A2-6, power failure detection module, synchronized threading, safe mode, touchscreen control, Ethernet, HaasConnect, HaasDrop, M130, WiFi • Additional functions: Macros, SOM Machine Benefits Technical Advantages • Maximum work capacity: 330 x 572 mm / bar capacity: 64 mm • Type: VDI turret with 12 tool stations • Type: programmable hydraulic tailstock • Prepared for robot integration / driven tools

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, število osi: 2, Ta DOOSAN PUMA 2100MS je bila izdelana leta 2011. Ima motoriziran prehod palice premera 65 mm in protivreteno, popolnoma opremljena s priborom in LNS podajalnikom palic. Idealna za vodoravno precizno struženje. Za več informacij o stroju nas kontaktirajte. Dodatna oprema • Motoriziran prehod palice s protivretenom • Kompletno z dodatki in LNS podajalnikom palic Dodatne informacije Stroj je še vedno pod napetostjo Hnjdpsx D Drvjfx Adkei

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, največja hitrost vretena: 3.000 obr/min, pomik osi Y: 60 mm, moč vretenovega motorja: 5.500 W, število osi: 5, This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features an MSX-850 controller, a 300 mm chuck, and a 10-station turret. With a maximum spindle speed of 3,000 rpm and a live tool speed of 6,000 rpm, it is ideally suited for complex turning operations. Additional features include a Y-axis travel of +/- 60 mm and a fully programmable NC tailstock. Contact us for further details about this machine. • Control: MSX-850 (MAPPS II software) • Chuck: 300 mm with 90 mm bore, A2-8 spindle nose • Increased main motor power/torque: 25/30 kW, 1,000/1,300 Nm Hodpfsx Sz Dbjx Adkjni • Turret: 10 stations • Driven tools (C-axis, Y-axis) • Maximum live tooling speed: 6,000 rpm • Live tool motor power: 5.5/5.5/3.7 kW • Y-axis travel: ±60 mm • Turning capacity: • Turning diameter: 420-500 mm • Turning length: 1,250 mm • Tailstock: NC, fully programmable with separate motor • Increased Z-axis power • Integrated manual tool presetting device • Chip tank • Coolant system: 325/520 W • Standard tool holders • Leveling blocks • Integrated work area lighting • Automatic shutdown system • Supplied with standard accessories Additional equipment: • New LNS chip conveyor (year of manufacture: 2025)