CNC stružnice 0–199 mm premer struženja nakup rabljenega (330)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 124.706 h, največja hitrost vretena: 6.300 obr/min, potovalna razdalja osi X: 370 mm, pomik po osi Z: 250 mm, moč vretenovega motorja: 10.700 W, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i (64-bit), število osi: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe we are offering for sale. Contact us for further details. TECHNICAL DATA • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment X stroke: 73 mm • Rear attachment Y stroke: ±50 mm • Main spindle C-axis: Yes • Hainbuch quick-change parts: Yes • Hainbuch setup aid base body: Yes • Hainbuch manual quick-change device: Yes • Sub spindle: Motor spindle • Sub spindle C-axis: Yes • Counter pressure device: Yes • Workpiece ejector: Yes Dujdpfx Ajza Ucxjbgew • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 cross-axis for front unit: Yes • Front unit: 5-position • Driven tools at the front unit: Yes • Parting-off side machining station: Yes • Driven tools at parting-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminum, plastic, brass, steel • Wash gun: Yes • Connected load: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Total rated current: 60 A OPTIONAL ADDITIONAL EQUIPMENT • FMB turbo 5-42 XT / 3200 “C” bar feeder • Bar feeder year of manufacture: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live workpiece stop, shank 16 × 16 mm • Brankamp CMS 100 collision monitoring Technical Specification Through-spindle coolant: Yes Counter spindle: Yes Driven tools: Yes

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: 000716, stružna dolžina: 130 mm, največja hitrost vretena: 8.000 obr/min, skupna masa: 1.300 kg, prehod palice: 16 mm, tipo 510 j – dotato di caricatore barre Iemca MiniBoss 325/37 nuovo nel 1996 – sensore utensile – accessori – controllo Fanuc 18-TB Dodpfx Abewrdxbegsuw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 215 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 120 mm, pomik po osi Z: 1.010 mm, moč vretenovega motorja: 22.000 W, število osi: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a bar capacity of 52 mm. The machine is equipped with a motor-driven turret with 12 positions and a Y-axis travel of 120 mm. If you are looking for a high-quality lathe, consider the Okuma LB 3000 EXII horizontal lathe we have for sale. Contact us for further details. - Control: OSP-P300LA - Spindle speed: 5,000 rpm - Spindle power: 22 kW - Spindle nose: ASA 6" (80 mm bore, no drawbar) - Bar capacity: 52 mm (Kitagawa SR1453 cylinder) - Spindle orientation: Electric - Y-axis travel: 120 mm - C-axis rotation: 360° (0.001° increments) - Turret: 12-position radial, driven - Turret motor speed: 6,000 rpm - Turret motor power: 7.1 kW - Tailstock: MT5 (500 kgf thrust, rotating center) - Toolholders: Eppinger live/static toolholders - High-pressure coolant pump: 0.8 kW, 6 bar, 20 l/min - Tool presetting: Manual - Programming: Conversational IGF - Chip conveyor: Enomoto hinge belt chip conveyor with external control panel - Voltage: 400 V Dedpoza E H Usfx Abgeuw - Number of phases: 3 P - Frequency: 50 Hz - Maximum power consumption: 33.1 kVA - Total current consumption: 47.8 A - Max. motor current: 154 A - Switch cabinet short-circuit withstand capacity: 2.5 kA - Machine is a demonstration model Technical Specification: - Counter spindle: Yes - Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Rabljeni CNC stružnica Index C200 z veliko dodatne opreme. Dujdozhdk Hspfx Abgew Tehnični podatki bodo dodani.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 3.500 obr/min, potovalna razdalja osi X: 250 mm, pomik po osi Z: 1.040 mm, moč vretenovega motorja: 18.500 W, skupna masa: 7.200 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-TC, število osi: 2, Torno horizontal de 2006. Este Johnford SL60 dispone de un volteo sobre bancada de 580 mm y un paso de husillo de 76,5 mm. Está equipado con un revólver portaherramientas de 12 posiciones y un motor de husillo de alto par con velocidad de hasta 3.500 rpm. Si busca un torno de alta calidad, considere la máquina Johnford SL60 que tenemos a la venta. Contáctenos para más detalles. • Paso de husillo: 76,5 mm • Guías: robustas guías prismáticas (para la absorción de vibraciones) • Revólver portaherramientas: 12 posiciones • Contrapunto: no (retirado/no montado) • Horas de funcionamiento: 30.713 h • Total de piezas producidas: 234.092 Equipamiento adicional • Plato autocentrante hidráulico Schunk de tres garras Rota 315/86 • Transportador de virutas • Juego de portaherramientas • Documentación completa (Johnford & Fanuc) • Copia de seguridad de parámetros Especificación técnica Dusdpfxozazlms Abgsw Contrahusillo: No Herramientas motorizadas: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 2.500 obr/min, potovalna razdalja osi X: 340 mm, pomik po osi Z: 2.000 mm, moč vretenovega motorja: 20.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 810D, število osi: 2, Horizontal lathe from 2008. This Weiler E50x2000 offers a 2000 mm distance between centers and a swing over bed of 570 mm. The spindle bore is 83 mm, with a maximum spindle torque of 1600 Nm. It will undergo a complete overhaul in 2026, including significant upgrades to enhance performance. If you are looking for a high-quality lathe, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Distance between centers: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed carriage guideway length: 560 mm • Spindle nose: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: Dujdpfx Abey H E Akjgow • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: Machine available soon • Overhaul: complete overhaul scheduled for 2026 • Hardening and grinding of all bed guideways; grinding of tailstock guideways • Overhaul of the complete bed and cross-slide unit (grinding/scraping of all guideways) • Renewal of carriage sliding surfaces • Refurbishment or shimming of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat size 3) • Complete spindle housing assembly overhaul • Regrinding of the main spindle (internal/external tapers and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw incl. bearings • Renewal of Z-axis ball screw incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and inspection of the main spindle motor • Overhaul of existing safety devices • Replacement of faulty rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and inspection of central lubrication system • Renewal of flexible cables and coolant hoses in the work area/to the monitor • Replacement of membrane keypad (monitor) • Renewal of energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage test with test report • Data backup of machine parameters/software • Geometric acceptance according to DIN 8605 Additional Equipment • Optional accessory: Chip conveyor available The machine is being overhauled in July; images are for reference only and indicate what it could look like. Technical Specification Counter Spindle: No Driven Tools: No

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 190 mm, pomik po osi Z: 640 mm, skupna masa: 4.500 kg, proizvajalec krmilnikov: FANUC, število osi: 2, Horizontal lathe from 2022. This Feeler FTC 350 LMC features a maximum turning diameter of 235 mm and a turning length of 600 mm. It offers rapid traverse rates of 30 m/min on both the X and Z axes, as well as a spindle speed of 4,500 rpm. If you are looking for a high-quality lathe, consider the Feeler FTC 350 LMC, now available for sale. Contact us for further details. • Maximum turning diameter: 235 mm • Maximum turning length: 600 mm • Rapid traverse (X/Z): 30/30 m/min • Chuck diameter: 210 mm • Spindle bore: 52 mm (optionally 66 mm) • Number of turret stations: 12 Dedjzar Rgspfx Abgsuw • Spindle motor power (continuous / 30 minutes): 7.5/15 kW • Live tooling power (continuous / 30 minutes): 2.2/3.7 kW • Tailstock travel: 610 mm • Quill diameter: 70 mm • Condition: As-new machine; only 6 months of use in single-shift operation Technical specification Counter spindle: No Driven tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, število osi: 2, Ta DOOSAN PUMA 2100MS je bila izdelana leta 2011. Ima motoriziran prehod palice premera 65 mm in protivreteno, popolnoma opremljena s priborom in LNS podajalnikom palic. Idealna za vodoravno precizno struženje. Za več informacij o stroju nas kontaktirajte. Dodatna oprema • Motoriziran prehod palice s protivretenom • Kompletno z dodatki in LNS podajalnikom palic Dusdpezaripsfx Abgjw Dodatne informacije Stroj je še vedno pod napetostjo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Premer struženja 100 mm Dolžina struženja 75 mm Duedoy T R Rtopfx Abgjw Krmiljenje FANUC Oi-TF Skupna potrebna moč 15 kW Opis sledi!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, največja hitrost vretena: 3.000 obr/min, potovalna razdalja osi X: 275 mm, pomik po osi Z: 1.283 mm, moč vretenovega motorja: 5.500 W, skupna višina: 2.000 mm, skupna širina: 1.195 mm, skupna masa: 8.000 kg, proizvajalec krmilnikov: FANUC, največja dolžina izdelka: 2.950 mm, število osi: 3, Ta 3-osni YCM GT-300LMB je bil izdelan leta 2010. Ima največjo hitrost vretena 3000 obr/min in velikost vpenjalne glave 12 palcev. Stroj ponuja pomik po osi X 275 mm in po osi Z 1283 mm, zato je primeren za različne stružne aplikacije. Če iščete visokokakovosten stružni stroj, razmislite o horizontalnem stružnem stroju YCM GT-300LMB, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Premer vretena: Ø100 mm • Velikost vpenjalne glave: 12 palcev Dsdpfx Aeyv E Irebgsuw Tehnične specifikacije Protivreteno: Ne Pogonska orodja: Da

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, CNC stružnica z 2-osmi, letnik 1995, v skladu s CE standardi CNC FANUC 0-T ravna vodila ASA 6" Djdpfxoy S R Ays Abgsuw premer prehoda palice 62mm največji premer rotacije nad posteljo 600mm največji obdelovalni premer 250mm največja obdelovalna dolžina 630mm največja moč vretena 15kW teža približno 5.000 kg Vključuje: hidravlična samozapirna glava kontra konica avtomatski revolverski nosilec za orodja s 12 pozicijami odvajač odrezkov

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Swing diameter over bed: 180 mm Turning length: 490 mm Swing diameter: 450 mm Cross travel: Z-axis travel: 168 mm Dedpfju Ix N Sjx Abgouw Control: Traub TX8D Spindle speed: 20 - 4000 rpm Spindle bore: Ø 60 mm Operating hours / Power-on hours: 23,495 h Tool turret: 12 tools Total power requirement: 38 kW Machine weight approx.: 4.2 t Machine dimensions approx. (LxWxH): 3.6 x 2.5 x 2.2 m Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63 Röhm power chuck Ø 200 mm hydraulic clamping Operation via double foot switch and control panel/operator console. Coolant system The Traub has an integrated chip conveyor with a discharge height of 1,100 mm (currently not functional). Accessories: various small parts 8 various machine feet without tailstock i.D.

Stanje: rabljeno, Leto izdelave: 2008, STRUŽNICA HAAS SL - 20 LETO PRVA INŠTALACIJA: 2008 DOLŽINA STRUŽENJA: 508 mm PREMER STRUŽENJA: 262 mm Dedpfsyzzw Tex Abgjuw HODI: X: 203 mm Z: 508 mm PREHOD PALICE: 51 mm REVOLVERSKA GLAVA: 10 POZICIJ HITROST VRETENA: 4.000 OBR/MIN ODVAJALNIK OSTRUŽKOV

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, največja hitrost vretena: 4.500 obr/min, potovalna razdalja osi X: 250 mm, pomik po osi Z: 1.000 mm, skupna masa: 3.000 kg, proizvajalec krmilnikov: FAGOR, število osi: 2, Horizontalni stružnica iz leta 2000. MICROCUT SF 48/1000 omogoča maksimalno dolžino struženja 1000 mm in premer vrtenja nad sani 240 mm. Opremljena je z revolversko glavo z 8 pozicijami za orodja ter omogoča hitrost vretena do 4500 min⁻¹. Če iščete kakovostno stružnico, razmislite o MICROCUT SF 48/1000, ki je na voljo v naši ponudbi. Za dodatne informacije nas kontaktirajte. • Premer vrtenja nad sani: 240 mm • Maksimalna dolžina struženja: 1000 mm • Vreteno: D1-6 • Premer prehodne odprtine vretena: 65 mm • Revolverska glava z 8 pozicijami za orodja • Prerez orodja: 25 x 25 mm • CNC: Fagor 8055 TC • Avtomatsko mazanje • Dimenzije: 3030 x 1935 x 2022 mm • Stanje: stroj pod napetostjo, v delovanju in redno servisiran Dodatna oprema • Multifix (hitromenjalni držalo orodij) Tehnične specifikacije Dusdpfoy Uuurox Abgew Kontra vreteno: Ne Pogonska orodja: Ne

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, 1 CNC stružnica NAKAMURA-TOME TW20 z dvojnim vretenom in dvema revolverskima glavama Leto 2000 1 robot STAUBLI RX130 s kontrolnim centrom Duodpfxoy Ta R As Abgow

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 1.000 h, potovalna razdalja osi X: 360 mm, pomik po osi Z: 980 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D Solution Line, število osi: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial tool turret and is equipped with a Siemens control system, ensuring reliable operation. With approximately 1,000 operating hours, this machine has seen very little use. If you are looking for a high-quality CNC lathe, you should consider the SPINNER TC800 horizontal turning machine that we are offering for sale. Contact us for further details. • Control: Siemens 840D Solution Line • X-axis travel: approx. 360 mm • Z-axis travel: approx. 980 mm • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A8 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz Dedpfx Abeyv Epvogjuw • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Hardly used, approx. 1,000 operating hours Technical Specification Counter Spindle: Yes Driven Tools: Yes

Stanje: novo, Leto izdelave: 2015, Two-spindle machine with two turrets, maximum spindle speed 6,000 rpm, equipped with a vibratory feeder, robotic handling unit, and post-process measuring unit. Fanuc control system. Dimensions: 2400 x 1650 x 1790 mm (main unit). Duedpfx Aelgy U Esbgew

Stanje: dober (rabljeno), Leto izdelave: 1999, 1 CNC stružnica Muratec MT12 z dvojnim vretenom in dvojnim revolverjem CNC Fanuc Leto: 1999 Dusdpfx Aey Ta Stsbgow Dobavljeno z vsemi orodji in nosilci orodij

Stanje: dober (rabljeno), Leto izdelave: 2008, 1 CNC dvovreteni, dvorevolverski stružni stroj MW120 MURATEC iz leta 2008, ki vključuje: 2 integrirana manipulatorja Dodpfxjy Ta Eys Abgjuw

Stanje: dober (rabljeno), Leto izdelave: 2005, 1 CNC stružnica z dvojnim vretenom, dvojnim revolverjem MW120 MURATEC iz leta 2005, vključno z: 2 integrirana manipulatorja Dedpjy Ta Egofx Abgjuw

Stanje: rabljeno, Leto izdelave: 1996, Swing diameter 530 mm Turning diameter 150 mm Spindle bore 65 mm Control unit SIEMENS 840 C Travel path x1 175 mm Travel path y1 +/- 70 mm Travel path z1 433 mm Travel path x2 175 mm Travel path y2 +/- 70 mm Travel path z2 433 mm Spindle speeds 38 - 4000 rpm Dodpfxevh Nbnj Abgeuw C-Axis 2x Tool turret 2x 12 positions Number of driven tool stations 2x 12 Tool holder cylindrical shank (DIN 69880) VDI 30 Total power requirement 33 kW Machine dimensions L x W x H 3.95 x 2.49 x 2.6 m Accessories: Collet chuck for main and sub spindle, one collet each for main and sub spindle, various tool holders (also for driven tools), various spindle reducers, chip conveyor, coolant unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Dusdpoy Ti Siofx Abgow Year of manufacture: 2013 Condition: used, very good, as new, no signs of wear, including new maintenance and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guide length: 350 mm Bed width: 205 mm Turning tool section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight, without packaging and accessories: approx. 1150 kg Length / width / height, net: 1720 x 890 x 1700 mm Headstock / rear panel / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: used, very good, as new, incl. new service and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guide length: 350 mm Bed width: 205 mm Tool cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN 55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: 50 metric Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Duodpfx Aey Ti Nusbgow Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight, without packaging and accessories: approx. 1150 kg Dimensions (L x W x H), net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety guard: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 250 mm, premer struženja: 150 mm, izvrtina vretena: 45 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 60 obr/min, potovalna razdalja osi X: 150 mm, pomik po osi Z: 285 mm, moč vretenovega motorja: 7.500 W, hitro pomikanje X-os: 20 m/min, hitri pomik na osi Z: 25 m/min, vrtljajska hitrost (min.): 60 obr/min, največja hitrost vrtenja: 6.000 obr/min, premer nihanja nad prečnim premičnikom: 150 mm, premer struženja nad ležiščem sani: 250 mm, vrsta vhodnega toka: trifazni, prehod palice: 45 mm, zunanji premer vpenjalne glave: 203 mm, nos vretena: A2-5, Oprema: dokumentacija / priročnik, Teža pribl. 4.000 kg Dimenzije pribl. 2000 × 1700 × 2000 mm Duodpsy T Hakjfx Abgow

Stanje: pripravljen za uporabo (rabljen), Vrsta stroja CNC stružnica Dujdpoza Anpofx Abgjw Proizvajalec WEILER Tip UD 24 Leto izdelave Stanje rabljeno Vrsta krmiljenja CNC Krmiljenje BOSCH CC 200 Premer struženja 190 mm Dolžina struženja 190 mm Krmiljenje BOSCH CC 200 Skupna potrebna moč 12 kW Teža stroja cca 1,6 t Potrebni prostor cca 2 (9) x 1,5 x 1,8 m