Stanje: rabljeno, Leto izdelave: 1991, Pozicija je sestavljena iz: (1) Tračni brusilni stroj Godpfxjx E Tqye Ab Tskf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta tračna brusilka ERNST 820-2 je bila izdelana leta 2002. Ima nov transportni trak in vakuumski sistem za varno fiksiranje obdelovanca. Glavni brusilni agregat uporablja dvonožni sistem, ki izboljšuje možnosti brušenja. Delovna širina znaša 1350 mm, višina pa 120 mm. Za več informacij o stroju nas kontaktirajte. Vrste uporabe: Gkodpjx D Dp Ujfx Ab Tsf Brušenje

Stanje: delavnici obnovljeno (rabljeno), Stroji za ostrenje rezil Proizvajalec: harich (Deckel) Model: SSM (S0E) prenovljen s CE z garancijo Oprema: - stojalo za stroj - integrirano odsesavanje prahu - brusilni kolut s prirobnico - orodje za oblačenje Godpfx Abjx A U Rgs Tjkf - navodila za uporabo vključuje novo strojno elektriko po najnovejših varnostnih predpisih vključno z novo izdelavo elektro načrta vključno s CE dokumentacijo vključno s CE označevanjem vključno z izjavo o skladnosti CE

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, PLC voden brušenje Gedpfx Ajxywgfeb Tjkf Miza: 1500 x 700 mm, Nosilnost mize: max. 1400 kg, Maks. razdalja med vretenom in mizo: 1000 mm (višina magnetske mize: 60 mm), Prizmatična V-vodila, kombinirana z ravnimi vodili in Turcit-B oblogo, Pogonska moč: 11 kW, Brusilni kamen: D405 x 50 x d127 mm, Teža stroja: 8100 kg. Dodatna oprema: - Elektromagnetna miza 1500 x 700 mm - Samodejna demagnetizacija - Samodejni podajalnik - Prenosno ročno kolo - Hladilni sistem s papirnatim pasovnim filtrom - Magnetni separator - Brusilno vreteno je bilo pred 1,5 let strokovno na novo ležajeno. Dobro stanje. Še v proizvodnji. Nahaja se na Madžarskem.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs classification: 8460.1920 Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum slide travel: 530 x 220 mm Maximum grinding area: 520 x 230 mm Table clamping surface: 600 x 200 mm Gkodpew Ucxqsfx Ab Tsf Table speeds: - Longitudinal direction (normal operation): 0-25 m/min - With slow feed: 5/10 mm - 8 m/min - Cross direction: 0-6 m/min Manual vertical travel: 330 mm - Rapid vertical travel (motorized): 290 mm - Vertical rapid travel speed: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement: - Handwheel (1 division): 0.01 mm - Micrometer device (1 division): 0.001 mm - Automatic: 0.001-0.099 mm - With pulse button: 0.001 mm Transversal feed movement: - Handwheel (1 division): 0.01 mm - Micrometer device: 0.001 mm Grinding wheel: - Diameter x width x bore: 225x25x50/51 mm - Normal speed: 2700 rpm - Variable speed: 3700-1300 rpm All technical data is provided without obligation and subject to errors or omissions.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C210068/9002194, dolžina brušenja: 750 mm, premer brusilnega koluta: 400 mm, skupna širina: 2.750 mm, skupna dolžina: 1.950 mm, skupna višina: 1.750 mm, premer brušenja: 250 mm, Stroj popolnoma opremljen s filtrirno enoto in opisom Gkedpfx Aboxz Tvxe Tsf Premer brušenja (največji premer obdelovanca): 250 mm Razdalja med konicama / največja dolžina brušenja: 750 mm Brusilni kolut (največja velikost): 400 × 40 × 127 mm Moč motorja brusilnega vretena: 5 kW Obrati brusilnega koluta: pribl. 2140 / 2640 min⁻¹ Vpenjanje obdelovanca: med konicami, konjiček; primerno za zunanje cilindrično brušenje Dolžina / širina / višina (približne skupne mere stroja): pribl. 2750 mm / 1950 mm / 1750 mm Teža stroja: pribl. 3,9 t (≈ 3900 kg)

Stanje: rabljeno, Leto izdelave: 2022, Pozicija obsega: (1) Tračni brusilnik Gsdpfjx E Ticox Ab Tjkf

Stanje: dober (rabljeno), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, Rotary Table Surface Grinding Machine Kehren Type RS 6B Stock number: 14-10-008 Machine Data: Year of manufacture: approx. 1970 Dimensions (L x W x H): approx. 2700 x 2000 x 2200 mm Weight: approx. 3500 kg Technical Specifications: Grinding area: Diameter: approx. Ø 600 mm Grinding height: approx. 300 mm Magnetic chuck diameter: approx. Ø 600 mm Drive power: approx. 15 kW Grinding spindle speed: approx. 1500 rpm Grinding wheel diameter: approx. Ø 350 mm Accessories: - Segment grinding wheel Price on request Gkjdpfx Aevtz Ukjb Tof

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 250 h, Funkcionalnost: popolnoma funkcionalen, English language For Sale: Guideway Grinding Machine (Converted from Metal Planer Machine) We offer a solid guideway grinding machine, originally a metal planer machine, now professionally converted. The main advantage is the relatively compact size in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required operational space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades and Equipment: • New ball screw spindles and bearings • 2 new motors + 2 refurbished motors Gksdpsxx Uudjfx Ab Tef • 3 new inverters • New Siemens SINUMERIK 802C baseline control system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Includes control cabinet, coolant tank with pump, and wall-mounted inverter for small spindle Machine is available for inspection and test by appointment. Feel free to contact us for more details. German language Zum Verkauf: Führungsbahnschleifmaschine (umgebaut aus einer Metallhobelmaschine) Zum Verkauf steht eine robuste Führungsbahnschleifmaschine, die aus einer ursprünglichen Metallhobelmaschine umgebaut wurde. Der große Vorteil liegt in den kompakten Abmessungen in Relation zur Werkstückgröße. Technische Daten: • Außenmaße (LxBxH): 4.800 x 2.500 x 2.000 mm • Erforderlicher Arbeitsraum: 4.800 x 3.500 x 2.700 mm (+ Schaltschrank, Kühlmitteltank, Zugang) • Tischgröße: 2.000 x 800 mm • Abstand zwischen den Ständern: 1.000 mm • Verfahrwege (X/Y/Z): 2.000 / 1.000 / 600 mm Ausstattung & Überholung: • Neue Kugelumlaufspindeln und Lager • 2 neue Motoren + 2 überholte Motoren • 3 neue Frequenzumrichter • Neues Siemens SINUMERIK 802C baseline Steuerungssystem • Großes Schleifspindel: 2.840 U/min – überholt + neuer Motor • Kleine Schleifspindel: 18.000 U/min – überholt • Schaltschrank, Kühlmitteltank mit Pumpe und separater Umrichter für kleine Spindel (wandmontiert) inklusive Besichtigung und Testlauf nach Vereinbarung möglich. Kontaktieren Sie uns für weitere Informationen.

Stanje: rabljeno, Leto izdelave: 2002, premer brušenja: 515 mm, teža obdelovanca med konicami: 500 g, WORK AREA – CYLINDRICAL GRINDING .. Max. swing diameter: 515 mm .. Max. workpiece weight between centers: 500 kg .. Max. workpiece weight with one-sided clamping: 120 kg WORK AREA – EXTERNAL GRINDING .. Max. grinding diameter: 515 mm .. Grinding length: 1500 mm TABLE – CYLINDRICAL GRINDING .. Swivel range (B-axis): from 8.3° Gkjdpfx Asx Azx Reb Tsf .. B-axis rotation range up to: -4° .. Longitudinal travel: 1680 mm WORKPIECE SPINDLE HEADSTOCK .. Speed range from: 14 rpm .. Speed range up to: 114 rpm .. Number of gear steps: 2 .. Drive power: 1.5 kW .. Tool mounting: MT 6 TAILSTOCK .. Quill stroke: 40 mm .. Quill mounting: MT 5 GRINDING SPINDLE HEADSTOCK .. Swivel range (B-direction): from -10° .. B-axis rotation range up to: 10° .. Drive power: 15 kW GRINDING WHEEL .. Grinding wheel type: Disc .. Max. diameter: 630 mm .. Bore diameter: 203.2 mm .. Width: 125 mm DIMENSIONS / WEIGHTS .. Required space (left/right): 5150 mm .. Required space (front/back): 3700 mm .. Overall height: 2200 mm .. Total weight approx.: 6500 kg ADDITIONAL EQUIPMENT (GRINDING) .. Chuck (quantity): 1 .. Coolant system: yes

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 650341, Year 1999 with Fanuc 18 TB - 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410x220x190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1”: R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper mounting: MT5 Reducing sleeve: MT5/MT4 Short outer taper mounting: DIN 55026 / Size 5 Permissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mounting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Wheel data Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left grinding wheel, max.: Ø 500 x 80 mm Right additional wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers 1000 mm, swiveling 0 to 9° Grinding carriage (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Gkodow T Tb Hopfx Ab Tof Air consumption: approx. 0.6 m³/h Coolant Max connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Except for error or omission, technical data is supplied without obligation.

Stanje: dober (rabljeno), Papirni tračni filter z veliko netkanega materiala SEITZ, tip PFA 200 Godpfxox Hh Aye Ab Tjkf

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Gkodpfxjw U Ry Ns Ab Tsf Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), številka stroja/vozila: 31.207.011, Datum izdelave Izvor izdelave Švica Napetost 380 V Neto teža 3150 kg Zunanje mere 400x185x175 cm Gkedpfx Aboiwtm So Tjf Carinska oznaka 8460 TEHNIČNI PODATKI Razdalja med konicama 1000 mm Višina konic 175 mm Brusilni kolut: premer/širina/luknja 500 x 80/100 x 203,0 mm Maksimalna širina brusilnega koluta 80 (100) mm Hitrost vretena 1220, 1360–1530 min-1 Miza (postopno nastavljiva) 0,02 do 6,0 m/min Prečni suport, pot 220 mm Vpenjalna glava, kot vrtenja 360° Hitrost (postopno nastavljiva) 20 min-1 do 400 min-1 Maksimalni premer obdelovanca 249 mm Maksimalni hod 1100 mm Konus konjička MK3 Tehnični podatki so informativni, pridržujemo si pravico do napak ali sprememb.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Gksdpfx Abow T Sc No Tsf Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Admissible frequency variation: +/- 3% Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 50 h, številka stroja/vozila: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3,100 kg Overall dimensions: 230 x 155 x 170 cm Installed power: 13 kVA Customs code: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Centre distance: 650 mm Grinding capacity (SpW+bs): 80 Travel: 700 mm LONGITUDINAL SLIDE Max. stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Feed rate: 50–5,500 mm/min Reversal delay: 0–6 sec Max. table swiveling angles: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max. stroke: 300 mm Rapid traverse: 60 mm Plunge depth in diameter: 3.4 mm Feed rate 1: 0.012–6 mm/min Feed rate 2: 0.012–1.2 mm/min Feed per pulse: 0.001–0.05 mm GRINDING WHEELHEAD Left-hand wheel, external grinding: 400 x 80 x 127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s Spindle speed: 1,670 / 2,110 rpm Internal grinding attachment for belt-driven spindles, incl. drive unit: 1.5 kW Gksdpow T Sd Tefx Ab Tef WORKHEAD Swivel range: 0–90° Infinitely variable spindle speed: 30–1,000 rpm Internal taper: Morse 5 Clamping collets: W-25 Drive power: 0.55 kW Max. workpiece weight between centers: 130 kg Air grinding load capacity: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Precision adjustment for cylindricity correction: ±40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of generator over 630 mm: 0.003 mm Roundness for air grinding: 0.0003 mm CONNECTION VALUES Max. absorbed power: 13 kVA Max. permissible voltage fluctuation: -15% / +10% Max. permissible frequency fluctuation: ±3% Required compressed air pressure: 5 bar Technical specifications provided without obligation and subject to change. Errors and omissions excepted.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 176308, Country of Origin: Switzerland Voltage: 400 / 380 / 50 / 3 Net Weight: approx. 350 kg Dimensions: 82x85x156 cm Installed Power: max 2 kVA Customs Tariff Code: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING SPINDLE GROUP Spindle Speed (bi-directional): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding Motor Power (2,800 rpm): 0.4 HP Vertical Slide Travel (linear): 100 mm Micrometer Stop Adjustment Travel: 25 mm Micrometer Stop Readout Accuracy: 0.01 mm Gkjdpfx Ajw T S Sqjb Tjf WORKPIECE SPINDLE GROUP Workpiece Spindle Speed (bi-directional, continuous): 100–900 rpm Motor Power: 0.2 HP Number of Indexing Plate Teeth: 120 Vernier Angular Readout: 20' Collet Type: W-20 Horizontal Travel: 100 mm Rapid Feed per Handwheel Revolution: 2 mm Micrometric Feed per Handwheel Revolution: 0.1 mm Micrometric Feed per Scale Division: 0.001 mm Spindle Head Swivel Range: a) In Main Direction: 165° Fixed Ratchet Indexing: every 3° Indexing with Micrometer Screw: every 2' b) In Grinding Plane: approx. 15° Index at 0° Cross Feed Travel: 80 mm Micrometer Travel: 25 mm Readout Accuracy: 0.01 mm Extraction Motor Power (2,800 rpm): 0.25 HP Technical specifications are provided without obligation and subject to errors or omissions.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7063234, Izvor porekla: Švica Napetost: 380/50/3 Neto masa: 550 kg Carinska številka: 8460.2930 Dimenzije: 150/60/120 cm TEHNIČNE LASTNOSTI Minimalni premer: 0,1 mm Maksimalni premer: 12 mm Maks. dolžina za plunge brušenje: 50 mm Premer delovnega brusilnega kolesa: 150 mm Dolžina delovnega brusilnega kolesa: 50 mm Premer pogonskega kolesa: 100 mm Motor za brušenje: 1,5 kW Hitrost delovnega brusilnega kolesa: 4500 min⁻¹ Pogonski motor: 0,35 kW Pogonsko kolo (spremenljivo): 20-150 min⁻¹ Gsdpfow T Tqnjx Ab Tskf Za diamantno profiliranje: 455 min⁻¹ Tehnični podatki so informativni in brez obveznosti v primeru napak ali izpustov.

Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 2257,

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Grinding Wheel Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings plus adjustment. New paintwork. Workpiece Headstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of components, replacement of worn and defective parts, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal Grinding Attachment Disassembly, cleaning of components, replacement of worn and defective parts, assembly of support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, replacement of hoses, worn and defective parts. Check hydraulic manifold. X Axis Disassembly, replacement of worn components such as O-rings, seals, segments, etc., overhaul of hydraulic cylinder, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor contactors and relay controls. New wiring. New variable frequency drive for workpiece headstock. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance, headstock to overhanging tailstock 1650 mm Centre height, standard 125 mm Centre height with riser block 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with risers 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement, 1 handwheel revolution – coarse 20.006 mm Manual table movement, 1 handwheel revolution – fine 2.457 mm Table speed, stepless, hydraulic –6 m/min Gkedpfxoxt Ilfj Ab Tef Table swivel 6° Stop, return 0–5 sec. Workhead Spindle Workpiece speed, stepless electric 20–400 rpm Swivel 360° Internal taper of workhead spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Quill retraction, manual or hydraulic 30 mm Internal taper for diamond dresser MT0 Universal Grinding Head Transversal slide stroke (grinding wheel) 285 mm Rapid traverse of grinding wheel slide, forward and back 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical movement of grinding spindle, centre height 125–330 mm Grinding wheel for cylindrical grinding, max 400x50x127 mm Grinding wheel for surface grinding, max 250x20x76 mm Swivel angle of grinding head, lockable every 90° 270° Wheel feed 1 division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Workhead spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Internal Grinding Attachment Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless stated otherwise, technical data is provided without guarantee and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: nepreverjeno, številka stroja/vozila: 06.E.400.020, Country of manufacture: CH Voltage: 3x400V - 24(V – DC) Dimensions: 237x206x195 cm Net weight: 5500 kg TECHNICAL DATA Gksdpeiqt S Aofx Ab Tef Control system: Fanuc 21i-MB 3 Axes U: Axis of the working grinding wheel W: Workpiece-to-workpiece / dressing axis X: Axis of the dressing wheel Working range Through-feed grinding Workpiece diameter: Ø 1.5 - 50 mm Working range Plunge grinding Workpiece diameter: Ø 1.5 - 100 mm Max. grinding length: 270 mm Grinding wheel Max. external diameter: Ø 400 mm Internal diameter: Ø 203.2 mm Max. speed: 50 m/sec. Drive power: 11 kW Optional drive power: 29 kW Regulating wheel Max. external diameter: Ø 250 mm Internal diameter: Ø 127 mm Speed: 5 - 1,000 min⁻¹ Tilt angle: +5° / -5° Drive power: 3.7 kW Positioning accuracy All 3 axes: 0.1 µm Glass scale resolution: 0.05 µm Dimensions Length: 2,060 mm Width (door open): 2,370 mm (3,120 mm) Height (safety cover open): 1,950 mm (2,100 mm) Weight: 5,500 kg Compressed air Max. pressure: 16 bar Air consumption: 165 L/min Air consumption with dressing spindle: 250 L/min Temperature: +15° / +40° C Errors and omissions excepted; these technical data are provided without obligation.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 external grinding spindle Country of manufacture: Switzerland Voltage: 380/50/3 Net machine weight: 4000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Max. workpiece weight: 80 kg Longitudinal slide Z Max. travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000 model: 0.001–5,000 mm/min) Resolution: 0.0001 mm Cross slide X Max. travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000 model: 0.001–10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swivel range: -15 to 225° (early 2000 model: -15 to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Godew T Sh Ejpfx Ab Tskf Speed: 1 – 1500 rpm Taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000 model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µ Control: Fanuc 21i-TB Specifications provided are subject to verification and do not constitute a binding offer.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 510-1986, CYLINDRICAL GRINDER JOTES SCHAUDT A440X1500 Specifications Max longitudinal travel: 1500 mm Grinding diameter: 298 mm External grinding: Yes Internal grinding: Yes Dimensions (L x W x H): 5400 x 2400 x 1600 mm Weight: 4800 kg Operating hours: Power-on hours: Condition: Rebuilt Compliant with local norms: ----- Status: Under power Gedpfxow T Ti Ds Ab Tskf Technical Features - Grinding length [mm]: 1500 - Grinding diameter [mm]: 300 - Manual table feed [mm/turn]: 10 - Table speed range [mm/s]: 0.01 – 5 - Minimum table stroke [mm]: 3 - Wheelhead swivel [˚]: ±90 - Tailstock sleeve taper [Morse no.]: 4 - Grinding wheel dimensions [mm]: 500 x 63 x 203 - Spindle speed [rpm]: 32 – 500 - Main wheel drive motor power [kW]: 5.5 - Workpiece drive motor power [kW]: 0.75 - Hydraulic pump motor power [kW]: 1.5 - Grinding attachment drive motor power [kW]: 0.75 - Overall dimensions [mm]: L=5400 / W=2400 / H=1580 - Machine weight [kg]: 4800

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 32461/2384, Country of Manufacture: Switzerland Voltage: 380 V / 50 Hz / 3-phase Net Weight: 2,200 kg TECHNICAL DATA Nominal centre distance: 600 mm Maximum centre distance (workpiece spindle head to tailstock extended): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plates (workpiece spindle + tailstock): 175 – 250 mm Maximum swing diameter (125 mm centre height): 250 mm Maximum swing diameter with intermediate plates: 350 – 500 mm Swivelling range of work table (left/right): 10° each Gksdpfxsd Amifs Ab Tjf Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically infinitely variable: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding (diameter x width x bore): 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding (diameter x width x bore): 250 x 13 x 76 mm Grinding spindle speeds: 1,500 / 1,700 / 2,200 / 3,600 rpm Swivelling range of grinding spindle head: 270°, lockable every 90° Vertical traverse of grinding spindle head (centre height): 125–350 mm Cross traverse of grinding slide: 285 mm Hydraulic rapid infeed and retraction of the grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev. Plunge grinding stock removal: 0–0.9 mm/rev. Micrometer stop for infeed per division: 0.001 mm/rev. Swivelling range of workpiece spindle head: 360° Workpiece speeds, steplessly adjustable, standard/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5 / Morse 3 Grinding spindle motor approx.: 4 hp Errors and omissions excepted. Technical data provided subject to confirmation. Inventory no. 2170089, Machine accessories list: - 1 Workpiece spindle head, Morse Taper 5 - 1 Sine bar without comparator - 1 Grinding spindle head with 4 drive pulleys - 1 Tailstock, Morse Taper 3 - 1 Collet clamping system with extractor and reduction sleeve B32 - 1 Internal grinding attachment with Fischer UJ50x250 arbor, drive pulley Ø 48 mm for 14,000 rpm - 1 Rotatable wheel dressing unit with 50 mm base - 1 Table swing stop without comparator - 1 Coolant system with decantation - 1 Ejector - 1 Balancing bar

Stanje: dober (rabljeno), številka stroja/vozila: 7351,