Tračni brusilnik

ERNST 820 - 2

Stanje: rabljeno, Leto izdelave: 1989, obratovalne ure: 74.900 h, vpenjalna sila: 850 kN, premer vijaka: 40 mm, skupna masa: 3.700 kg, Machine No. 145464 Year of manufacture: 1989 Machine weight: 3,700 kg (without oil filling) Clamping force: 850 kN Heating capacity: 8.31 kW Motor: 18.5 kW Iaoder Hrqrjpfx Adksp Total power: 27.2 kW Machine cycles: 7,112,306 Operating hours: 74,900 h Interfaces: Central computer, handling equipment, blow-off, diverter gate, core pull 1 hydraulic, mould temperature control 3 units. The machine comes with the following accessories, etc.: Complete 50-series thermoplast injection unit, selector valve, hydraulic infeed conveyor (height-adjustable, 3 levels) (integrated in control), external floppy disk drive (original Arburg), documentation and machine service reports from Arburg Service, machine setting CMD training materials (folder), electrical diagram, documents also available in digital form, oil filling (must be pumped into a container prior to transport; pump is available), electronic water manifold.

Leto izdelave: 1997, stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system Iaedpfx Adeidi Ivjkep • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation

Stanje: rabljeno, Skobeljni in debelinski stroj Nikmann FS 41N - širina skobljanja 41 cm - vreteno s 4 noži - 2 mizna valja - motor z zavoro Iedpfsya Drvox Adkjap Stroj v zelo dobrem, odličnem stanju.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1995, delovna širina: 4.100 mm, globina grla: 250 mm, skupna masa: 20.000 kg, stiskalna sila: 200 t, Hämmerle BM200-4100. Stroj je bil leta 2023 demontiran v stari tovarni, v novi pa ni bil ponovno postavljen ali zagnan. Od takrat je stroj v skladišču. Vsa pripadajoča oprema in dokumentacija sta priloženi. Stroj je možno kadar koli ogledati in je takoj pripravljen za nakladanje. Vsi podatki so navedeni na slikah... Iajdpewa S Dnsfx Adkep Orodja niso priložena, saj ustrezajo novi napravi.

Leto izdelave: 2011, stanje: dober (rabljeno), Sušilna peč, temperirna peč Caltherm 200 C Naprodaj v odličnem stanju, večnamenska konvekcijska peč z mešanjem zraka za toplotno obdelavo, proizvajalca CALTHERM. Električno ogrevana enokomorna peč z mešanjem zraka. Proizvajalec: Caltherm J7172 Leto izdelave: 2011 Notranje dimenzije: Širina: 300 cm Višina: 200 cm Dolžina: 185 cm Maksimalna projektna temperatura: 200 °C Testna temperatura: 200 °C Čas dosega nastavljene vrednosti: 45 min Število grelnih elementov: 12 x 3,6 kW Ventilatorski motor: 15 kW Priporočena skupna električna priključitev: 100 A Tip regulacije temperature: West 6400 Zunanje dimenzije: Širina: 430 cm Dolžina: 330 cm Višina: 300 cm Iaodpfx Asvu Hvpodksp Teža: ca. 4800 kg

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, NC-controlled drilling and dowel insertion machine Manufacturer: Weeke Model: Optimat ABD 150 Year of manufacture: 2007 Workpiece dimensions Length: 20 - 1250 mm Width: 100 - 800 mm Thickness: 10 - 60 mm Active center stop: max. length 600 mm Equipment: Iasdpfexdl Raex Adksp - Horizontal drilling unit with 3 individually selectable spindles, spindle pitch 32 mm - 1 dowel insertion tool (positioned 32 mm from the first drilling spindle) - Glue nozzle with adjustable glue quantity - Glue flow monitoring - Mist oiler for glue nozzle - Standard dowel dimension: 8x30 mm / 8x35 mm - Vibratory feeder for automatic dowel feeding 1. BASE MACHINE - Sturdy steel frame construction - Axis movement in X, Y, and Z directions - Ball screw (Y and Z axis) and rack-and-pinion drive (X axis) - Digital AC servo motor - Support table with left and right side stops and rear stop rail - Center stop pneumatically lowerable, manual actuation via selector switch - 6 top hold-down cylinders, manually adjustable - Centralized lubrication system power control PC85T Modern control system based on Windows PC

Stanje: dober (rabljeno), Riello RLS50 oil and gas burner, 581 kW, approx. 15 kg/h Iajdpfx Aepiqiaedkop

Stanje: rabljeno, Leto izdelave: 1976, Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 1000 mm Premer struženja v izrezu: 850 mm Število vrtljajev: 15 - 810 o/min Višina konic: 300 mm Vrtina vretena: 56 mm Skupna potrebna moč: 9,0 kW Teža stroja pribl.: 2,9 t Dimenzije stroja pribl.: 2,8 x 1,45 x 1,65 m Stružnica z vodilnim in vlečenim vretenom - 3-čeljustna glava Forkardt F 315 Iaodpew Tdxcsfx Adksp - Enostavni držalo za orodje - Luneta - Vrtljiva konica - Zaščita glave, nadzorovana s končnim stikalom - Kad za odrezke

Stanje: novo, Leto izdelave: 2025, Working width: 408 mm Cutterhead: Strip knife Iaodewfcqcspfx Adkop Number of knives: 3 Planer table length: 1640 mm Planer fence angle adjustable: yes Planer tables fold up: manual Maximum thicknessing planing height: 225 mm Thickness table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 kg

Stanje: rabljeno, Leto izdelave: 2023, Used machine Year of manufacture: 2023 Condition: in absolutely mint condition, machine is unused Iajdpfx Adow E Ty Uskep Features and technical data: - 2-belt machine; 1st belt: roller, 2nd belt: pad - Usable working width: 1100 mm - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibrating roller: 150 mm - Sanding pad width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Continuously adjustable feed carpet gearbox with speed range: 4–20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation “Eco Gear Patent System” - 1 unit drum brake for belt braking - Swiveling roller for belt tensioning - 3 pressure rollers; rubber-coated - Emergency stop bar at the feed - Electronic display of workpiece thickness - 2 roller conveyors with 2 rollers each at infeed and outfeed - 1 extraction nozzle, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - no valves - no light barrier - not sensitive to dust - energy-saving, environmentally friendly system - Since 2008, this machine model with the mentioned system has operated continuously without any lateral belt drift!!!! - Incl. Unitek belt motor 14.7 kW instead of 11 kW (Promotor) - Incl. Unitek pneumatic sanding pad with application control synchronized to feed speed Availability: short-term Location: Saxony-Anhalt