Miza za brušenje

- 1250 x 750

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h Lrsdpfx Ajfyadbel Tjn • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), AL-KO Sanding Table AST 1.5 BASIC The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and bears the seal "Wood Dust Tested according to BGI 739-1". YOUR ADVANTAGES Ljdpfx Alodqzhbj Torn - Accessible from 4 sides - Loadable up to 150 kg - Manual, tool-free height adjustment with scale - Recessed longitudinal sides for edge sanding - Workpiece-friendly beech wood grate (removable) - Funnel-shaped airflow to extraction port TECHNICAL DATA AST 1.5 BASIC - Extraction port: 140 / 160 mm - Required extraction capacity: 1,500 m³/h - Negative pressure at port at 22 m/s: 1,000 Pa at DN140 mm / 700 Pa at DN160 mm - Working height adjustable from: 735–1,015 mm - Working surface (W x L): 946 x 1,500 mm - Dimensions (W x L): 1,000 x 1,600 mm - Weight: approx. 73 kg

Stanje: rabljeno, Dolžina ~ 600 mm Širina ~ 700 mm Višina ~ 1.000 mm Maksimalni premer žaginega lista ~ 300 mm Lrsdeulfftopfx Al Ton Brusilni stroj Trennjäger za brušenje majhnih krožnih žag.

Stanje: pripravljen za uporabo (rabljen), veliko komponent je bilo obnovljenih in prenovljenih Lrjdpexxb Ukjfx Al Tjn

Stanje: zelo dobro (rabljeno), 4 kW motor Transport dimensions Height 310 cm Lrsdpfx Ajup Ulqsl Tsn Width 90 cm Length 180 cm

Stanje: novo, Leto izdelave: 1985, Blow-in diameter: 300 mm Chip bags: 4 Filter bags: 16 Lrodpfx Asurv Hbjl Tsn Filter cleaning: manual Dimensions (approx.): 1900 x 670 x 2800 mm (L x W x H)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Extraction table without rear/side walls Technical data: Working surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2,250 mm (including power strip) Power strip with tool tray: 2x 230 V sockets with hinged cover, 2x compressed air couplings, power cable and main switch Ledpfx Aljuzf Iho Tern Extraction port Ø 160 mm, with rim

Stanje: zelo dobro (rabljeno), odsesovalna naprava IMAS Ledpfjyw Hrbex Al Tsrn

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Oscilirajoča utorni stroj z 2 mizama BALESTRINI mod. 2CAP Ljdjx Rc Urepfx Al Tern

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, delovna širina: 800 mm, višina obdelovanca (maks.): 150 mm, Hello, We are selling production line for hammering stone slabs maximal width 800mm. In the pacage is also Donatoni reinforcement mesh remover from the back of the stone slabs. The line is still working and it is possible to test it. We will dismantle the machine in the January 2026. Loading on truck included. Ljdpfx Alsx Afp Hj Tjrn