Hidravlična stiskalnica z enim stolpcem

ZEULENRODA PYE 63 S 1 M

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. Ffedpfxsfxyhfs Aflet The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: omejena funkcionalnost, prehod palice: 51 mm, skupna masa: 6.000 kg, capacità barra 51 mm - tre torrette - tre assi Y - portautensili fissi/rotanti - caricatore barre LNS Sprint 552 nuovo nel 2011 - controllo Fanuc Ffedpfx Aswvvyrsfljt

Leto izdelave: 1978, Stanje: rabljeno, Pressure 100 t Outreach 380 mm Stroke 400 mm Drive power 22 kW Installation height 600 mm Fsdpfx Afelp U Dpjlsft Ram surface 600x500 mm Table surface 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure shut-off, Pressing time

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Spindle diameter: 100 mm X travel: 1500 mm Y travel: 1450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° Control system: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 - 1,600 rpm / stepless Table load capacity: 4.0 t Fodpou Idqbsfx Aflsft Table size: 1100 x 1400 mm Rotary table: 360° Feed rates (X/Y/W/Z axis): 2 - 2000 mm/min Rapid traverse (X/Y/W/Z axis): 5000 mm/min Total power requirement: 40 kW Switch cabinet dimensions: 2000 x 600 x 2000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC drilling and milling machine with hydraulic power unit Equipment: Measuring probe Electronic handwheel Hydraulic counterbalance Y-axis Universal milling head And a range of accessories – please inquire! Subject to prior sale.

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Ffedov E R E Ajpfx Aflst Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions

Stanje: rabljeno, Leto izdelave: 1997, Pritisk 40 t Razdalja izhoda 300 mm Hod 630 mm Vgradna višina 900 mm Površina mize 620 x 520 mm Prebojna odprtina v mizi 150 mm Višina mize nad tlemi 600 mm Površina batnice 150 mm Skupna potrebna moč 15,0 kW Teža stroja cca 4,5 t Potrebni prostor cca 1,0 x 1,9 x 3,0 m Dovoljeno za ročno upravljanje v skladu s CE standardi Z oljno hidravličnim pogonom, krmiljeno po tlaku/času ali hodu, dvoročno upravljanje Fsdpfxevuucke Afleft Stiskalnico si je mogoče ogledati v delovanju v našem skladišču

Stanje: rabljeno, Leto izdelave: 1983, Technical Specifications: Fedpsu Nfvuefx Afleft Press force: 160 t Throat depth: 360 mm Ram stroke (max.): 500 mm Distance table/ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4 x Ø 62 mm Ram speed forward: 200 mm/s Ram speed return: 125 mm/s Ram surface: 450 x 850 mm Borehole in ram: Ø 49 mm Height above floor: 810 mm Total power requirement: 17 kW Machine weight approx.: 7,200 kg Machine dimensions approx. (LxWxH): 2.1 x 1.4 x 3.4 m Manual counter i.O.

Stanje: dober (rabljeno), Leto izdelave: 1991, Sheet width: 2500 mm Sheet thickness: 4 mm Cutting angle: 1.49° Strokes per minute: 40–80 Ffsdpfjtq S T Nox Aflet Frame throat: 200 mm Number of hold-downs: 13 pcs Backgauge - adjustable: 5–1000 mm Table height: 750 mm Oil capacity: 85 l Required air pressure: 5 bar Machine weight approx.: 3600 kg

Stanje: rabljeno, Leto izdelave: 1986, Tlak 160 t Izvesek 360 mm Hod 500 mm Hitrost dol 200 mm/s Hitrost gor 125 mm/s Najv. razdalja miza - bat 1000 mm Površina mize 900 x 630 mm Površina bata 850 x 450 mm Vpenjalni zatič premer x globina 50 H7 / 85 mm Skupna moč 17 kW Fodpfx Afov Rgwxelsft Teža stroja pribl. 7 t Potrebni prostor pribl. D x Š x V 1,25 x 2,2 x 3,45 m

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, številka stroja/vozila: NEBR-4397, Here are the technical specifications of the offered machine: If this press does not exactly meet your requirements, you can request a customized offer tailored to your needs with just one click: Contact us for a custom offer Fjdpfx Asfhcc Ijflsft HIDROBRASIL manufactures presses exactly to your specifications at surprisingly affordable prices! ##### Technical Details - Pressure: 15 t - Stroke: 160 mm - Machine weight: approx. 330 kg - Oil tank: 10 l - Robust machine frame with sturdy welded construction, built according to DIN 8651 ##### Additional Information - Low-maintenance and reliable thanks to robust technology - Cylinder with induction hardening and chrome plating - Steel quality: construction steel LCG ASTM A36 - Four support feet with M30 bores for floor anchoring ##### Equipment - 1.5 T rotating mandrel attachment, mechanical, with locking device, serrated shaft, brake, and 220 mm travel - Hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring - Throat depth (back wall to center of tool fixture): 280 mm - Assembly table swivels 180 degrees to the right, central bore 60 mm, M12 T-slots - Clearance height between the swivel table and ram/mandrel guide: 450 mm - Clearance height with optional insert table: 650 and 800 mm - Optional insert table, central bore 60 mm, M12 T-slots, size 270x200 mm - Base height with two compartments for insert table: 750 mm - Hardened pressure plate on the cylinder, 10 mm larger diameter than the cylinder - Tool mount in cylinder head: M30 - Pump lever moves from top to bottom - Oil tank for 10 L hydraulic oil AW 46 - Machine frame painted blue, RAL 5012, textured coating - Attachments painted anthracite, RAL 7021 - Hydraulic single-column combination press as a custom machine, 15 tons, manual operation (C-frame press, hydraulic press) ##### Looking for a made-to-measure machine? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds upon these standards. Our core strength lies in special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly affordable prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.