CNC precizni horizontalni 5-osni obdelovalni center

YASDA YBM-900N

Stanje: dober (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 4.230 mm, pomik osi Y: 1.950 mm, pomik po osi Z: 750 mm, dolžina mize: 4.000 mm, širina mize: 1.250 mm, obremenitev mize: 11.000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double linear guide and flat guideway design Automatic head changer for multi-sided machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance spindle nose to table: 213–1093 mm Distance spindle center to table: 130–… mm Horizontal head indexing: 5° x 72 positions Heidenhain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, Huron type X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg Pgedpoxf E Twsfx Altop X-axis feed rate: 12,000 mm/min Y-axis feed rate: 15,000 mm/min Z-axis feed rate: 12,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer: 30 positions Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is presented in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute any representation or contractual terms. We recommend you verify all critical details.

Stanje: rabljeno, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 900 mm, največja hitrost vretena: 1.200 obr/min, hitrost pomika os X: 900 m/min, Ø vretena: 140 mm Nastavek vretena: ISO 50 Dolžina giba v osi X: 7000 mm Dolžina giba v osi Y: 4000 mm Dolžina giba v osi Z: 900 mm Dolžina giba v osi W: 900 mm Rotacijska miza: 1800 x 1800 mm Maksimalna nosilnost: 10 ton Dolžina giba mize v osi V: 1500 mm Pjdst Rkcuspfx Altjgp Število vrtljajev vretena: 1200 vrt/min Moč motorja vretena: 70 kW CNC ECS 2101 2 glave za obdelavo 2 pritrdilne plošče, velikosti 6000 x 2000

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Pedpfx Alewrzkzetogp Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4304, premer vrtljive mize: 600 mm, višina brušenja: 450 mm, skupna masa: 14.500 kg, Machine is equipped with 3 spindles: face grinding, external grinding, and internal (bore) grinding. Pgsdpfx Asvt A Rtsltjp Turret head on B-axis with 1° indexing. Band filter unit included.

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 1300mm/1100mm/1000mm, table size X/Y: 800mm/800mm, number of pallets: 14, max. table load: 2200kg, table indexing: 0.001°. Spindle speed: 7000rpm, spindle power: 50HP, tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, weight: approx. 24000kg. An on-site inspection is possible. Pgedpfx Ajtx Dn Ujltop

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Distance between centers: 400 mm - Usable diameter: 180 mm LINEAR AXES - Travel X1 and X2 x Z: 220 mm - Travel Z: 850 mm - Resolution X x Z: 0.0001 mm TURRET: - Number of fixed positions: 12 - Tool holder: VDI30 GRINDING WHEEL HEADSTOCK - External grinding right: * Grinding wheel dimensions (Ø x width x bore): 400 x 50 x 127 mm * Drive power: 6.8 kW WORKPIECE SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - Taper type: MT4 - Drive power: 10.5 kW - C-axis: 0.001° SYNCHRONIZED COUNTER SPINDLE STOCK - Max. spindle speed: 7,500 rpm - Synchronous speed: 1 - 5,000 rpm - C-axis: 0.001° Pgjdpfevxw A Usx Altep - Internal taper: MT4 - Micrometric adjustment: +/- 40 micron - Drive power: 10.5 kW POWER SUPPLY - Capacity: 45 KVA DIMENSIONS - Space requirement: 2,800 x 3,960 mm - Machine weight: 7,600 kg OPERATING HOURS - Power-on hours: 57,000 h ACCESSORIES - CN FANUC 310i-modelA - StuderWIN software - RS232 / USB interface - Remote electronic handwheel - Turret head with automatic length calibration Renishaw LP2 - Marposs diameter probe (multi-range) + Z4-axis for positioning - Semi-automatic balancing of the grinding wheel MPM.3 BMT100 M.24 - Coolant tank 480 L * with paper filter * with magnetic filter - Chip conveyor - Mist extraction - Cooling unit for grinding wheel motor - Electronic contact detection Dittel AE6000 - Stationary dressing device on the workpiece spindle stock - Control cabinet air conditioning - Balancing shaft - Interface for automatic loading system

Stanje: rabljeno, Leto izdelave: 2017, potovalna razdalja osi X: 435 mm, pomik osi Y: 465 mm, pomik po osi Z: 560 mm, teža obdelovanca (maks.): 80 kg, skupna višina: 2.755 mm, skupna dolžina: 3.360 mm, skupna širina: 3.870 mm, skupna masa: 8.500 kg, nos vretena: MAS BBT 40, Matsuura MX-330 - PC10 Vertikalni 5-osni obdelovalni center CNC krmiljenje Matsuura G-Tech 31 i Velikost mize: ø 130 mm Nosilnost mize: 80 kg Število palet: 10 Največji premer x višina obdelovanca: 330 x 300 mm Pomik po X-osi: 435 mm Pomik po Y-osi: 465 mm Pomik po Z-osi: 560 mm C-os (vrtenje mize): 360° A-os (nagib mize): -125/+10° Hitrost vretena: 50 – 15.000 min⁻¹ Vreteno MAS BBT 40 Moč vretena: 7,5/5,5 kW Kapaciteta zalogovnika: 90 Psdpfxey Ny Ako Altsgp Za vprašanja o stroju smo vam na voljo po telefonu ali e-pošti. Oglejte si tudi naše druge oglase za popoln pregled naše zaloge.

Stanje: dober (rabljeno), Leto izdelave: 1997, Ref.-Nr.: 10620 Proizvajalec: SKODA Tip: W 200 T Leto izdelave: 1997 Vrsta krmiljenja: CNC krmiljenje Krmiljenje: SIEMENS SINUMERIK 840 Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 16.000 mm Y-hod: 5.150 mm Z-hod: 1.600 mm W-os: 2.100 mm V-os: 2.000 mm B-os: 0 - 360 ° Premer vretena: 200 mm Obremenitev mize: 80.000 kg Vpenjanje orodja: SK 60 / SK 50 Hitrost vrtenja: 1.000 obr/min Premer rotacijske mize: 3.500 x 3.000 mm Dodatne informacije: Vključuje kotno glavo Pgjdpfxeyagide Altsp Stroj je mogoče pregledati pod napetostjo.

Stanje: dober (rabljeno), Leto izdelave: 1990, 4-osni obdelovalni center Dimenzije mize: 1200 x 660 mm Pomiki osi: X 1050 mm, Y 650 mm, Z 660 mm Psdofbml Nopfx Altogp Največja obremenitev mize: 1600 kg Hitrosti podajanja: 15.000 mm/min Orodniška menjava s 31 mesti, delno opremljena s BT 50 nosilci orodij 4. os (krmiljena): NIKKEN CNC 250, premer vpenjalne glave 250 mm Dimenzije (DxŠxV): približno 3000 x 5000 x 2900 mm Teža: približno 13.000 kg

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6860 0007, Please provide us with your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain. ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carriers Technical data of the machine: Podpfxovbgiis Altogp 5-axis grinding center including oval feed belt and loading gantry 12-position tool changer with HSK 63 Maximum travel distance X-axis: 500 mm Maximum travel distance Y-axis: 650 mm Maximum travel distance Z-axis: 650 mm Table size: 500 x 650 mm Cut detection Nordmann dressing spindle Oil supply via central factory supply