Rezkalni stroj - vertikalni

WMW FSS 250x1000

Stanje: rabljeno, Pressure: 75 t Stroke: 250 mm Clearance between uprights (length/side): 800 x 215 mm Installation height: 170 - 885 mm Operating pressure: 7.5 - 8.5 bar Machine weight: approx. 0.45 t Dimensions (L x W x H): 1.2 x 0.8 x 2.1 m Hydraulic/pneumatic workshop press Cylinder can be shifted laterally Pneumatic foot pedal Winch for table height adjustment 2 press blocks CE marking Fpsdpfjupxr Uex Abvjd

Stanje: rabljeno, Leto izdelave: 2000, Grinding length: 800 mm Centre height: 150 mm Control system: FANUC Grinding wheel dimensions (max.): 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45° / -15° Workpiece spindle speed: 22–313 / 51–750 rpm Workpiece headstock swivelling range: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed speed: 0 – 7.5 m/min Machine weight: approx. 4.0 t Space requirements (LxWxH): approx. 3.7 x 2.2 x 1.9 m -Including coolant system -Including closed steady rest -Including dressing diamond -Including open steady rest -Including 3 grinding wheels -Including 3 flanges -Including internal grinding spindle adapters Fedou Hag Njpfx Abvjpd

Stanje: rabljeno, Technical Details: Travel path - Y: Slide on beam: 200 mm Spindle mount ISO: SK 40 Spindle head tiltable left and right: 90° each Quill stroke: 80 mm Speed range: 90 - 900 / 5 steps rpm Distance table - spindle bottom end: min./max.: 50 / 400 mm Table clamping surface (mounting area): 760 x 200 mm Table clamping surface (clamping area): 630 x 200 mm Max. table load: 100 kg X travel: table longitudinal: 320 mm Z travel: table vertical: 350 mm Table tiltable +/-: left/right 30° each Distance table - spindle bottom end: min./max.: 50 / 400 mm Feed:: Table: stepless 14 - 71 mm/min Total power consumption: 4.0 kW Approx. weight: 1,200 kg Machine dimensions (LxWxH): 1.3 x 1.5 x 1.8 m Equipped with Heidenhain digital position display for X and Y. Fpjdpfxou Ndb Ae Abvsd Swiveling working spindle. The feed is driven via a variator gearbox. The table is tiltable. Spindle speeds have 3 mechanical gear steps and 2 electrical steps. Coolant system. The milling beam is extendable by approx. 350 mm. The machine vise is a recommendation and is not included in the scope of delivery. It can be purchased optionally.

Stanje: rabljeno, Tenon cutter / Dowel saw LOSER model AA220 - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6–18 mm. Fpsdpfsqpdkcjx Abved

Stanje: rabljeno, Technical Details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table speed: 0.05–4.5 m/min, stepless Spindle speed: grinding spindle 1780, 2050 rpm Spindle speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2200x280 mm Table swivel range: 9° forwards / 10° backwards Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDER without internal grinding attachment - For precision grinding of external (and internal) as well as tapered surfaces. - Infeed of grinding spindle headstock by hand or hydraulically - Table feed hydraulically infinitely variable - Grinding spindle swivels by 60° - Workpiece headstock swivels by 90°, with MK 4 mounting - Tailstock, MK 3 mounting Equipment: - Wheel dressing device Fpsdpfx Asu Ng Dgjbvsd - Coolant tank including pump and supply as per description.

Stanje: novo, Drilling capacity in steel (diameter): 13.0 mm X-travel: 300 mm Y-travel: 130 mm Speed: 100 - 2500 rpm Throat depth: 165 mm Spindle taper: MT 3 Table size: 490 x 120 mm Milling cutter diameter: 30.0 mm Motor: 230 Volt Total power requirement: 0.75 kW Machine weight approx. 50 kg Space requirement approx. 520 x 500 x 740 mm Description: - Brushless DC motor - Ensures optimal torque in the lower speed range - Dovetail guideways on X, Y, and Z axes - Backlash-free adjustable via gib strip - Milling head swivels both sides for angle drilling, bevel milling, etc. - Quill adjustment via handle, fine adjustment via handwheel - Precisely ground cross table with T-slots - Maintenance-free 500 W drive motor runs smoothly - Infinitely variable speed control for adaptation to the workpiece Fedpfx Aexabb Hobvspd - Individually lockable guides ensure a clean milling finish Scope of delivery: - Geared drill chuck 1 - 13 mm / B16 - Drill chuck arbor MT 3 / B16 - Drawbar M12 - Height-adjustable safety guard - Operating wrench

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Fpsdpfevbhv Rjx Abvsd Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Fodpfx Abewhp Dnevepd Machine weight: approx. 5,000 kg

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Fpedpfxsu Sbkge Abved Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: rabljeno, Leto izdelave: 1969, Grinding height: 60 mm Grinding width: 120 mm Grinding wheel diameter: 600 mm Grinding length: [mm not specified] Workpiece height: 60 mm Total power requirement: 50 kW Machine weight: approx. 7,000 kg Space requirement: [not specified] DISKUS vertical double-sided surface grinding machine in C-frame design with rotary table workpiece feed Model: DDS 600 CRA Year of manufacture: 1969 S/N: 6672 Grinding wheels – diameter x bore each: 600 x 150 mm Grinding wheel height approx.: 60 mm Workpiece transport disc external diameter: 810 mm Workpiece: Max. grinding height x grinding width: approx. 60 x 120 mm Spindle adjustment vertically, each approx.: 150 mm Hydraulic infeed impulses for depth feed: 0.0025 – 0.05 mm Outer diameter of transport disc: approx. 810 mm Rotary table feed rate steplessly adjustable: 14 – 145 mm/s Grinding wheel speed each approx. (24 m/s)/765 rpm Grinding spindle drive each: 22 kW Total drive approx.: 50 kW / 380 V / 50 Hz Machine weight: approx. 7,000 kg Accessories / Special features • Workpiece rotary table device for round transport discs with corresponding cut-outs for inserting components and with automatic discharge of finished parts onto a chute into a transport box. • IONIC measuring control No. 9 So with probe for measuring ground workpiece height and, if required, with automatic hydraulic grinding wheel infeed. • Stepless speed adjustment of the rotary device depending on the grinding dimension and workpiece. • Manual grinding wheel adjustment via corresponding buttons • Hydraulically pivoting dressing unit (RA) between both grinding wheels for simultaneous dressing of both grinding wheels with appropriate compensation and automatic return to the effective workpiece thickness after dressing = high time savings, can be triggered manually as well as via timer • Ampere counters for both grinding spindle drives * Central lubrication system, • Mechanical height check of parts with automatic machine shutdown in case of overheight • Separate control cabinet, separate hydraulic unit, separate large belt filter system, various grinding wheels, various transport discs, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in high-volume production. For example: shims, piston rings, hydraulic components, watch parts, stamped parts, etc. Fpjdst Hw N Hspfx Abvod Condition: good – soon ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice