Univerzalni stroj za rezkanje orodij

MAHO MH 1000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1985, obratovalne ure: 29.192 h, največja hitrost vretena: 4.000 obr/min, skupna višina: 2.988 mm, skupna širina: 4.288 mm, skupna masa: 9.000 kg, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, največja dolžina izdelka: 4.152 mm, število osi: 3, This 3-axis MAHO MH 1000 C/A was manufactured in 1985. It has approximately 29,192 operating hours and comes with manuals and documentation. The safety doors are partially disassembled but included. If you are looking for high-quality machining options, you should consider the MAHO MH 1000 C/A universal machining center we offer for sale. Contact us for further details. Tool interface: ISO 50 Ram travel, vertical spindle: 100 mm Dsdpfx Aoy Hizqspljkl Spindle speed range: 20-4000 rpm Spindle speed override: 80–120% Feed rate X/Y/Z: 1–4000 mm/min Feed force X/Z: 8000 N Feed force Y: 24,000 N Rapid traverse: 10 m/min Feed and rapid traverse override: 0–140% Table diameter: 1250 mm Table length: 800 mm Center bore: 42 mm H7 T-slots: 7 T-slot spacing: 100 mm Manual cross adjustment: 275 mm Table transmission ratio: 1:120 Table rotation per handwheel revolution: 3° Table rotation per index: 2° Positioning resolution: 0.001° Step width per index: 0.026 mm Table tilt X-axis: ±30° Table tilt Y-axis: ±30° Table rotation: 360° Table clamping pressure: 80 bar Max. table load: 800 kg Table weight: 1100 kg Voltage: 220/380 V Frequency: 50 Hz Total connected load: 36 kVA Total power with coolant: 41 kVA Total power with coolant and tool changer: 46 kVA Positioning accuracy: 0.001 mm Approximate machine hours: 29,192 h Condition: currently idle, not in operation Documentation/manuals: available Safety doors: partially disassembled, included Accessories: none Tool holders: not included Table axis: only one axis, cannot reference manually, error present

Stanje: rabljeno, Leto izdelave: 1994, Swing diameter: 570 mm Turning length: 2000 mm Dksdou Sbkgjpfx Aplsl Control: Sinumerik 805 Siemens Max. swing diameter over cross slide: 365 mm Main spindle speeds: 3–2,500 rpm Main spindle drive power: 15/19 kW Spindle bore: 62 mm Spindle nose: DIN 55027 No.8 Tailstock quill taper: MK 5 Quill stroke: 190 mm Quill diameter: 80 mm Feed range – longitudinal and cross: 0.01–50 mm/rev Total power requirement: 50 KVA Machine weight approx.: 5 t Space requirements approx.: m Includes Forkardt chuck F315 Includes 6 pcs. Multifix tool holders Includes 1 pc. closed steady rest Includes 1 pc. open steady rest

Stanje: rabljeno, Leto izdelave: 1985, številka stroja/vozila: 11429, Prodajam rezkalni stroj MAHO MH 1000c Serijska številka 11429; BKW GmbH model S..05ES Leto izdelave: 1985; 18 bar; Prostornina 1,6 m3/h; 3000 obr/min; Moč 0,36 kW; 50-60 Hz; Napetost 190-240 V; Tok 2,85 A; Dkodpfx Asyuwr Soplol Neto cena: 9000 EUR.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.000 mm, dolžina pomika po osi Y: 750 mm, dolžina podajanja os Z: 600 mm, Prodam na fotografijah vidno nemški rezkar MAHO model MH 1000. Stroj je delujoč, priključen in pripravljen za uporabo. Stanje stroja ocenjujem kot zelo dobro. Stroj lahko na mestu priključite in preizkusite. Nakladanje stroja je vključeno v ceno. TEHNIČNI PODATKI: - Hitri pomiki v vseh oseh - Orodje se vpenja mehansko - X 1000 mm - Y 750 mm - Z 600 mm - Stožec vretena ISO 40 - Vrtalna pinola z avtomatskim podajanjem - Obrnjena glava - Dimenzije mize 740 x 1250 mm, trojno obračljiva - Dodatno ima ročni pomik v osi Y +-200 mm - Miza obračljiva za 360 stopinj - Miza vzdolžno in prečno obračljiva plus/minus 30 stopinj - Obrati od 32 do 1600 - Dimenzije stroja 3500x2500x2500 mm - Teža cca 5500 kg Dsdevmhtyjpfx Apljkl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Max. front drilling diameter: 12 mm Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Djdpfxsydaade Aplskl Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 30216 & 30277, dolžina podajanja os X: 1.000 mm, potovalna razdalja osi X: 1.000 mm, Univerzalni rezkalni stroj za kov Dsdpfsp S Schsx Aplokl Proizvajalec: MAHO Model: MH 1000 Na voljo 2 kosa! x-hod 1000 mm Vpenjalna glava SK 40 Digitalni prikaz. Glava nagibna +/-. Miza nagibna in vrtljiva +/-. Pomik pinole. - 3-osni digitalni prikaz - Univerzalna miza 1.250 x 740 mm (T-utori 16 mm) - Vertikalna rezkalna glava SK 40 z navojem S 20 x 2 - 6 avtomatskih pomikov pinole 0,02/0,03/0,05/0,08/0,12/0,20 mm/obrat - Centralno mazanje, ročni pogon Stroj je mogoče ogledati. Takoj pripravljen za uporabo. Prosto naloženo, prevoz ni problem.

Stanje: rabljeno, Leto izdelave: 1991, X-axis travel: 1000 mm y-axis travel: 500 mm z-axis travel: 700 mm Table clamping surface: 1250 x 700 mm Spindle taper: ISO 50 Spindle speeds: 20 - 3200 rpm Quill stroke: 100 mm Control system: semi-automatic Phillips 432 Operating hours: 62,340 h Main drive motor: 22 kW Total power requirement: 27 kVA Machine weight: approx. 7.7 t Dkedpfetv Ii Ijx Aplol Footprint: 3.8 x 4.1 x 2.4 m Accessories: Hydraulic vice X-axis, longitudinal: 1,000 mm Y-axis, vertical: 500 mm Z-axis, transverse: 700 mm Min/Max distance vertical spindle to table top: 138 / 600 mm Max. arm reach: approx. 800 mm Spindle taper: SK 50, with internal coolant supply, Stepless spindle speeds (2 ranges): 20 - 3,200 rpm Feed rates XYZ = 1 - 3,000 mm/min Rapid traverse XZ = 6,000 mm/min, Y = 5,000 mm/min Indexing device as 4th axis With full enclosure of the work area

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Djdpfx Apowi Ty Aolokl Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Stanje: rabljeno, Leto izdelave: 1996, Konzolni rezkalni stroj - univerzalni Znamka: MAHO Tip: MH1000 Tehnične specifikacije: - Motor vretena: 5,5 kW - 1500 vrt/min - Motor za pomik: 3 kW - 1500 vrt/min - Motor črpalke: 0,18 kW - 3000 vrt/min - 70 l/min Dkodpfx Apoxn Rkgelel - Število vrtljajev vretena: (18) 32-1600 vrt/min - Vpenjalni konus vretena: ISA40 - Hod pomičnega vretena: 125 mm - Dimenzije mize ob stolpu: 570x600 mm - Hod X: 1000 mm - Hod drsnika: 750 mm - Hod Z: 600 mm - Pomik X: 10–5000 mm/min - Hitri pomik: 1,4 m/min - Dimenzije univerzalne mize: 1250x740 mm - 360-stopinjsko vrtljiva miza - Miza se nagiba vzdolžno in prečno približno 30 stopinj - Teža stroja: 5500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Dkedpfx Apog Ufvboljl Drive type: HYDR (hydraulic) Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!