Stroj za krtačenje in poliranje

WINTER RUSTOMAX OPTIMAT 400

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. Nedpfx Aetmqi Djbbjkt The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: novo, Leto izdelave: 2025, skupna širina: 2.000 mm, skupna višina: 2.000 mm, skupna dolžina: 1.620 mm, delovna širina: 1.100 mm, skupna masa: 1.000 kg, moč: 12 kW (16,32 KM), vhodni tok: 20 A, najv. debelina pločevine: 120 mm, najv. debelina jeklene pločevine: 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm working width. Nkedotzfpkepfx Abbot The DM1100 Z refines and deburrs light metal sheets that have been cut by laser, punching, or shearing. This machine is equipped with a single wide-belt station, which can be used for deburring parts from 50×50 mm up to a maximum width of 1100 mm. The DM1100 Z is also suitable for surface finishing, and can be operated with both standard abrasive belts and non-woven/Scotch belts. DM1100 Z Working capacity (mm): 1100x120 Number of belt stations (Z): 1 Abrasive belt dimensions (mm): 1100x1850 Abrasive roller specifications: Ø186mm Abrasive belt speed (m/s): 8-22 Feed speed (m/min): 1.5-10 Abrasive belt motor per head (kW): 11 Feed motor (kW): 0.18 Total power (kW): 12 Current consumption (A): 20 Dust extraction connection per head (Ø mm): (1x) 152 Dimensions (mm): 1620x2000x2000 Weight (kg): 1000

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, najv. debelina pločevine: 102 mm, skupna dolžina: 1.300 mm, skupna širina: 3.100 mm, skupna višina: 2.600 mm, skupna masa: 2.600 kg, prehodna širina: 1.500 mm, višina obdelovanca (maks.): 102 mm, One machine for everything: Removal of slag, burrs, and oxide Reliable and clean slag removal with slag hammer brushes The EdgeRacer the Grinder easily removes slag formed on the underside during plasma or oxy-fuel cutting. The disc brushes are calibrated to nearly touch the underside, allowing the steel pins to efficiently knock off the slag. Powerful deburring and precise edge rounding EdgeRacer® the Grinder effortlessly removes persistent punching burrs and laser beads/spatter. By adjusting the brush feed, you can also precisely control the degree of edge rounding. Deburring and edge rounding of sheet metal and 3D components Deburr thin sheets or plates with cut-outs. The grinding brushes can be set to reach below the transport level, ensuring complete processing of the entire workpiece edge. The oxide disc enables removal of oxide layers from both inner and outer contours. Nodjwzybkjpfx Abbskt Full working width or double performance – optimally adapted to your requirements Depending on the width of the parts to be processed, you can choose between two processing modes. Select the single-row mode to utilize the full working width, ideal for wide parts or parallel loading. For optimal tool wear management, the brushes automatically alternate their positions. For narrower workpieces, choose the double-row operation for double the processing in just one pass.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Surface grinding device on the left, roller diameter: 100 mm Sanding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180 / 10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, sanding belt dimensions: 50 x 2000 mm Nedpfxewvt I Hs Abbjkt 2 spindle speeds via pole-changing motor: 11,450 / 2,900 rpm Drive motor: 380 V, 0.9 / 1.3 kW Space requirement: 1,000 x 400 x 1,800 mm Weight: 140 kg