Chopsaw

WINTER RACS

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1989 Isdsivaryepfx Abxoau SN: 1989-02-08 In good condition The SP700 series by Randek is a reliable saw designed for manufacturers of roof trusses and houses worldwide. The SP700 saw is efficient, easy to operate, and precise. It has been on the market for a long time and has been continuously improved in close collaboration with many customers. This semi-automatic saw features a tilting saw blade, allowing for all required cuts. With its large saw blade diameter (700 mm), it is possible to cut multiple sections of wood stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, up to three boards can be cut per cycle - PLC programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line length: 11.5 m Technical data subject to correction.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Number of spindles: 5 pcs. Working width: 230 mm Planing height: 160 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000–6,000 rpm - Width and height are motor-positioned: left spindle: radial upper spindle: axial - Feed carriage motor-positioned DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15–230 mm Working height (with tool diameter 125 mm): 10–160 mm (with tool diameter up to 163 mm): 10–160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Grooving device: diameter difference 20–25 mm to planing head Iaedpfxewgwmhe Abxou Important: The system cannot be operated without jointing cutter Extraction nozzle D = 125 mm Tool clamping system: quick clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled...

Stanje: novo, Circular saw blade diameter: 500 mm Max. cutting height: 120 mm Motor power: 5.5/7.5 kW Working length: 4100 mm Salvapush 2000 optimizing cross-cut saw For complete wood optimization and defect cutting Version 4100 (working length) ----- Technical specifications: - Cutting range: min. 30x12 mm, max. 270x120 / 300x95 mm. Optional special cutting ranges on request. - Plate length before cutting: min. 500 mm, max. 4100 / 5100 / 6100 mm, depending on version - Possibility of a single cut in the last 40 mm of the board. Minimum final trim length: 5 mm. - Maximum wood weight: 120 kg (optional special solution on request) - Feed with pusher, directly controlled by an innovative computer-controlled and servo-driven system, digitally connected via EtherCAT. - Special working table inclined at 25 degrees for easy loading and to hold the workpiece securely clamped - Double steel frame construction, highly robust, reinforced and painted. - Special rear safety locking device for appropriate occupational safety. Pusher speed up to 60 m/min in compliance with current safety regulations: Carriage travel speed can be set directly from the computer depending on cutting area. Faster version optionally available. - Very sturdy pusher carriage: extended dimensions approx. 300x345x25 mm. - The aluminum support is large and solid: height 135 mm, width 120 mm. - Special transmission system with 50 mm wide toothed belt with 33 hardened steel bands inside, ensuring high precision and performance - Electronic brushless servo motor with constant torque and digital EtherCAT connection - Photoelectric laser cell for wood detection, and a luminescence reader for fluorescent markings. System is fixed-position, eliminating manual adjustments when wood thickness changes. - Electronic operating system S-OPTIM - Complete management of up to 5 cutting grades - Robust discharge table for collecting the cut workpieces, made of hard steel, length 3000 mm. Inclined at 25 degrees, same as rest of the conveyor, and complete with guide ----- Price of the machine as listed: on request! ----- Optional extras (at surcharge): - Extended discharge (outfeed) table - Gravity preloading system - Zebra label printer - Saw motor upgrade from 5.5 kW to 7.5 kW - Extension of cutting range to 140x240 – 100x300 with circular saw blade diameter 550 mm - Horizontal side discharge - Wide pusher plate Optional alternatives to discharge (outfeed) table: - Version TT: rotary discharge table for full discharge of all cut parts in one cycle - Floor flap for discharge table with rotary function to remove end pieces from trimmed lumber - Version LS: electronic sorting unit For sorting cut pieces by size and grade with 3 high-speed ejectors ----- Ijdpfjwhf Ipsx Abxjau Prices for the above options: on request! ----- (Technical data as per manufacturer's specifications – subject to change without notice!)

Stanje: dober (rabljeno), premer žaginega lista: 600 mm, največja višina reza: 200 mm, dolžina podajanja os X: 6.000 mm, največja hitrost vretena: 4.000 obr/min, zunanji premer: 600 mm, moč vretenovega motorja: 11.000 W, glavni premer žaginega lista: 600 mm, Krovska krožna žaga z nagibom od 0 do -45° in +45° ter z možnostjo obračanja od 0 do -45° in +45° Iajdpfxjykmrts Abxsu

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 1.100 h, Still a very nice longitudinal saw with only 1,100 operating hours, almost like new. Manufacturer: Irion, Model: HFS 170, Year of manufacture: 1993 Iaedpfx Aov T Rc Debxou Maximum cutting length: 6,200 mm Maximum cutting width: 600 mm Maximum cutting height: 170 mm Equipped with digital width display and laser.

Leto izdelave: 2019, obratovalne ure: 100 h, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: oms 08 RP-TR1400, The machine originally cost €125,000. Iedjiypynopfx Abxeau As good as new, barely used. Make an offer!!! You can load pallets up to 6 meters in length for strapping.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Schmidler S4 Joinery Machine - 4-strand transverse infeed conveyor (upward inclined) - Infeed roller conveyor - Edge-flipping device integrated into the infeed roller conveyor - Zero-point detection - Electronically controlled under-table mitre saw Saw blade diameter: 710mm Swivel angle: 360 degrees Inclination: 0–65 degrees - Waste wood pusher - Horizontal marking pen (from below) and vertical marking pen (from behind) - Universal milling unit incl. finger joint cutter and dovetail cutter head Iaedpfxjya Dc Ij Abxeu - Horizontal drilling unit – rafter nail drilling device - Vertical drilling unit - Vertical profiling cutter (bottom) for inside radii - Powered outfeed roller conveyor - Pneumatic push-off ruler - Transport and measuring system - Control system incl. color monitor Maximum workpiece dimensions: Height: 300mm Width: 400mm Length: approx. 12,000mm 4-sided planer – Schmidler Minimum workpiece dimensions: Height: 30mm Width: 50mm Feed speed: 9/18 m/min Planer shaft diameter: 140mm Chamfering unit on 4 sides Infeed roller conveyor Outfeed roller conveyor with push-off ruler and stacking rods Machine in good used condition, fully operational and currently in use. Viewing by arrangement possible at any time. Immediate sale or by arrangement.

Stanje: novo, Leto izdelave: 2026, A700 Popolnoma Avtomatska Kotna Žaga za Masivni Les, 3 m Popolnoma avtomatsko rezanje velikih aluminijastih profilov s preprosto avtomatizacijo. Položite kateri koli aluminijasti profil – stroj ga samodejno zazna in odreže glede na naloge z visoko-natančnim pozicioniranjem materiala preko servo motorja. Vnos obsežnih listo izreza je poenostavljen z uvozom excelovih seznamov preko WIFI povezave. Za vsak kos aluminija, ki ga položite za rezanje, ne glede na dolžino, laserski senzor izmeri dolžino. Naš zmogljiv optimizacijski algoritem v realnem času izračuna najboljši vrstni red delov za minimalne odpadke. Stroj samodejno reže izračunan seznam brez ustavljanja. Ni potrebnih dodatnih vnosov – samo vstavite nov material. Enostavna, hitra alternativa dvojni žagi. Preprosto vnesite (ali uvozite) želene dolžine in kote, nato pritisnite GO. Stroj neprekinjeno proizvaja vaše kote, natančno in hitro. • Popolnoma avtomatsko podajanje in dolžinsko rezanje materialov. • Uporabniku prijazen vmesnik za samodejno delovanje – vnos naloge in rezanje v nekaj sekundah. • Poenostavljeno rezanje po kosih, serijah ali velikih excelovih seznamih. • Razrez več palic hkrati ter štetje kosev. • Oddaljen WIFI vnos seznamov iz excela z naprednim preslikovanjem podatkov. • Popolnoma nastavljive hitrosti rezanja in podajanja lesa za največjo produktivnost. • Samodejni optimizacijski način z laserskim merjenjem dolžine in optimizacijo odpadka (opcijsko). Isdpfemdq Icox Abxoau • Samodejni izpis nalepk za dele na podlagi seznamov (ročna aplikacija nalepk, opcija). • Neposredno označevanje materiala v liniji brez potrebe po upravljavcu (opcijsko). • Izpis ali skeniranje črtnih kod/QR kod za vnos nalog (opcijsko). • Avtomatizirano servo pozicioniranje kota žaginega lista do ±75° (opcijsko). Izjemno primerno za: • Proizvodnjo okvirjev in strešnih konstrukcij • Izdelavo konstrukcij iz lepljenega lesa pod kotom • Serijski razrez lesa • Proizvodnjo pohištva • Izdelavo korit in škatel Model: A700 Dolžina: 3 m Največja dolžina materiala: 1680 mm Potisna zmogljivost: 20 - 40 kg Programska oprema: Optimizator KVALITETNI AUSTRALSKI STROJI.

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence Isdpfov A Htkjx Abxeau - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: rabljeno, Leto izdelave: 2021, skupna masa: 200 kg, vhodna napetost: 400 V, skupna širina: 800 mm, skupna dolžina: 1.350 mm, skupna višina: 1.500 mm, volumenski pretok: 216 m³/h, potrebna višina: 1.500 mm, potrebna širina: 800 mm, zahteva za prostor dolžina: 1.350 mm, filtrirna površina: 2 m², negativen tlak: 31.500 Pa, moč: 3 kW (4,08 KM), transportna višina: 1.500 mm, transportna dolžina: 1.350 mm, transportna širina: 800 mm, kapaciteta rezervoarja: 80 l, No. 04520 Mobile Extraction System / Portable Dust Extractor ESTA WHISPERSOG 3.0 FM Unused, year of manufacture 2021, in as-new condition Industrial vacuum cleaner for cleaning tasks and machine extraction The high-vacuum cleaners WHISPERSOG operate more quietly than conventional industrial vacuum cleaners, while offering the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction from machines. The use of permanent filter cartridges can significantly reduce operating costs compared to disposable filters. The collected dust can be easily disposed of using the patented tilting device. Application areas: Removal of coarse, fine, and free-flowing dust during cleaning tasks / direct extraction from machines in continuous operation Drive power 3 kW Electrical connection 400 V Maximum negative pressure 31,500 Pa Maximum air flow rate 216 m³/h Extraction nozzle diameter 50 mm Filter area 2 m² Dust collection container 80 liters Potential-free contact for automatic start when the machine is switched on Ijdpfx Aoylb Ixsbxeau Including power cable with 16 A plug, cable for potential-free connection, and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm (LxWxH) Weight approx. 200 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines any warranty is excluded; it applies: "purchased as inspected" Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock