Kombinirani stroj za krožno žaganje in rezkanje

WINTER KSF-315-2000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems of this series are H3 dust-tested, with residual dust content less than 0.1 mg/m³. High extraction performance with minimal space requirement Maximum performance in this class Very quiet Application area Clean air extraction systems for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with a corresponding extraction port diameter Also suitable for multiple dust sources High-quality, well-engineered construction Sturdy and compact housing made of galvanized sheet steel Extraction port can be easily switched from left to right, enabling flexible use Large service openings Large-volume, mobile chip containers with clamping bracket and chip collection bag System is delivered fully assembled, ready for quick commissioning Mobile Filter Description Ultra-compact with maximum filter surface area Filter material made of polyester fleece, aluminum-coated, washable, and therefore long service life Filter as standard in antistatic version, tested and approved according to category M-BIA Filter resistance monitoring via differential pressure gauge, adjustable with warning lamp at control panel Fan positioned downstream of the filter Features: Ihodpfx Ajcnw U Dsf Tjt With innovative locking device for secure container positioning All systems in this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal fan wheel Service opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed castors and 2 swivel castors with parking brake Pre-fitted for connection of machine detection for up to 8 machines and slide controls Manual cleaning Sound pressure silencer available as accessory Model: RLA 125 M Item No.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal airflow: 1,095 m³/h Max. airflow: Vacuum at nominal flow: Filter surface area: 5.31 m² Filter material: dust class M Residual dust content: 0.1 mg/m³ Chip container volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1,100 x 830 x 1,650 mm Height from bottom of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Saw Saw blade speed: 3000 / 4000 / 5000 RPM Saw blade diameter and bore: 300 – 400 mm, 30 mm Saw blade tilting: 90° – 45° Cutting depth at 90° / 45°: 125 mm / 90 mm Cutting width with parallel fence, version Z400 M, Z400 EL: 1350 mm (option 1000 / 1525 mm) Cutting width with parallel fence, version Z400 X1, Z400 X3: 1250 mm (option 1500 mm) Cutting length: 3500 mm (option 2500 mm / 4100 mm) Cast iron table dimensions: 985 mm x 710 mm Sliding table dimensions: 3200 mm (option 2200 mm / 3800 mm) x 420 mm Cross table dimensions: 1420 mm x 650 mm Length of swiveling cross fence: 2295 mm (telescopic extension up to 3000 mm) Scoring unit Scoring saw blade diameter and bore: 120 mm, 20 mm Cutting depth with 120 mm scoring blade: 3.5 mm Ihedpfx Afoglfv So Tst Scoring blade rotational speed: 8200 RPM Scoring saw motor power: 1.3 kW / 2 HP (S6) Weight: 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Power supply: 400 V 3-phase (option 230 V 3-phase) Motor power (3-phase): 7 kW / 9.5 HP (S6), option 9.2 kW / 14 HP (S6)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 30 h, Funkcionalnost: popolnoma funkcionalen, Avtomatski brusilni stroj za tračne žage – ISELI BAP110 ISELI BAP110 je najsodobnejši, popolnoma avtomatski brusilni stroj za liste tračnih žag, razvit za najvišje zahteve glede natančnosti, učinkovitosti in udobja pri upravljanju. Zaradi avtomatiziranega postopka brušenja BAP110 zagotavlja enakomerno in kakovostno obdelavo žaginih zob – z minimalno potrebo po osebju. 🔹 Popolnoma avtomatsko delovanje 🔹 Natančno nastavljiva oblika in razmak zob 🔹 Prilagodljiva uporaba za različne liste tračnih žag 🔹 Intuitivno upravljanje z uporabniku prijaznim vmesnikom Iodpfx Afov Tltds Toht Stroj je še posebej primeren za žage in brusilnice, ki cenijo stalno visoko kakovost reza in optimizirane pretočne čase.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Piła taśmowa do metalu o optymalnym zakresie cięcia, powszechnie stosowana w zakładach stolarskich, produkcyjnych oraz rzemieślniczych. Ihodewq A Dyepfx Af Tot Opis maszyny CORMAK BS 128HDRC to piła taśmowa do metalu o optymalnym zakresie cięcia, przeznaczona dla profesjonalistów, wyróżniająca się wydajnością i łatwością obsługi. Obracane ramię w obu kierunkach to istotna zaleta podczas cięcia pod kątem. Mimo niewielkich gabarytów, duża masa własna (103 kg) zapewnia stabilność i brak drgań podczas cięcia większych elementów. Cięty element może być podawany ręcznie lub przez podajnik. Posuw grawitacyjny z przepływem oleju w dwukomorowym siłowniku hydraulicznym. Sterowanie opuszczaniem ramienia odbywa się przez zawór regulujący przepływ oleju między komorami siłownika. Za precyzyjne prowadzenie taśmy odpowiada zestaw łożysk prowadzących. Maszyny wyposażone są w wyłącznik krańcowy i wyłącznik główny zgodne z IP54. Przegubowe ramię piły umożliwia cięcie dwustronne w zakresie -45° do +60°. Dane techniczne: Wymiary taśmy tnącej: 1640×13×0,65 mm Prędkość cięcia: 23/34/54 m/min Moc: 0,55 kW/400V Sterowanie opuszczaniem ramienia: płynne, siłownik hydrauliczny Zakres cięcia: -45° – +60° Wymiary: 942×442×548 mm Waga: 103 kg Maksymalny zakres cięcia [mm]: Kąt 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Wyposażenie standardowe: - Siłownik hydrauliczny 3. generacji - Stół do cięć pionowych - Szybkomocujący imadło - System chłodzenia time ogranicznik materiału time wyłączniki krańcowe automatyczne time zabezpieczenie termiczne silnika time mobilna podstawa na czterech kołach time instrukcja obsługi Cena podana jest ceną netto. Do ceny nie doliczono kosztów wysyłki. Po więcej informacji zapraszamy do kontaktu telefonicznego lub mailowego. Szczegóły i pełna oferta dostępne na naszej stronie internetowej.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1974, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 74-4-10, Panel Saw ALTENDORF F90, Year of Manufacture 1974 Machine No.: 74-4-10 Manufacturer: Altendorf, Germany Saw stroke (mm): 2600 Cutting width (mm): 1,300 Max. cutting height (mm): 130 Max. saw blade diameter: 400 mm Main motor: 5.5 kW Ihodpfx Afsipvrbo Tet With scorer unit 4 speed settings Saw blade height adjustment: manual Approx. weight (kg): 780 Technical specifications subject to change

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 – -45 ° Usable spindle length 100 mm Ijdpfxshp Rdle Af Toht Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Iodpfjxl Ha Ssx Af Tsht Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: novo, Leto izdelave: 2025, Planer-Thicknessers and Jointers Offered by Cormak Our shop features a wide range of professional, versatile planer-thicknessers that combine stable operation with precise surface finishing—all at a competitive price point. Unlock tools that accelerate your production and enhance the quality of your wooden products, even for amateur use in home workshops. With Cormak, satisfaction is guaranteed. Construction and Operation of the Planer-Thicknesser - Table: The thicknessing table is made from high-quality, ground cast iron with a polished working surface rated at Ra 1.6. Table height is adjusted using a large, ergonomic handwheel, which can be locked in place with a quick-action eccentric lever. - Knives: The key component of a planer, these are located above or below the table and are responsible for removing excess material from the wood's surface. The knives can be mounted to a rotating cutter block or cutting head. - Motor: The planer is powered by an electric motor that delivers the energy required to drive the cutter blocks or milling head. - Cutter Block Guard: The guard can be adjusted as needed, with settings for height, angle, and extension. - Feed Mechanism: This woodworking machine is equipped with feed rollers (driving and driven), positioned very close to the cutter block, allowing even relatively short pieces to be processed. The feed rollers are chain-driven, ensuring slip-free operation (no ‘stepping’ of the workpiece). Isdpovxh Nxofx Af Tjht - Guides: Guides help to maintain smooth, even movement of the workpiece. The adjustable fence allows for angles anywhere between 90° and 45°. - Stability: The machine’s robust weight delivers excellent stability, providing safe, vibration-free operation thanks to additional anti-vibration feet. - Ease of Use: Adjustments are straightforward, and switching between planing and thicknessing modes takes only a few seconds. Technical Specifications for Woodworking Thickness Planer: - Cutter Block Diameter [mm]: 75 - Cutter Block Speed [rpm]: 4000 - Extraction Port Diameter [mm]: 100 - Tilting Fence Angle [°]: 0 – 45 - Number of Knives: 3 - Knife Dimensions [mm]: 250x30x3 - Maximum Jointing Width [mm]: 254 - Maximum Thicknessing Width [mm]: 254 - Maximum Planing Height [mm]: 180 - Max Thicknessing Depth of Cut [mm]: 3 - Max Jointing Depth of Cut [mm]: 2.5 - Thicknesser Feed Rate [m/min]: 6 - Dimensions (L x W) [mm]: 1080 x 260 - Gross Weight [kg]: 152 - Motor Power: 2.6 kW - Power Supply: 230V

Stanje: rabljeno, številka stroja/vozila: G-KR114450H, Panel saw SCM, good condition, 5.5 kW, approx. 700 kg Prices subject to change without notice. Errors, misprints and typesetting mistakes excepted. Ihjdpfx Afjvw Ec Hj Tjt

Stanje: zelo dobro (rabljeno), Belt Sander LANGZAUNER Ijdpfouxnyuox Af Toht Model LZG Approximate table dimensions: 2500 x 800 mm Approximate sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Sanding belt cover (top) Work area light strip CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Notes on used machines: • Subject to technical changes, errors, and prior sale. • Quoted prices are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, without any warranty entitlement. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)