Parni kotel 6000 kW

WEISS

Stanje: zelo dobro (rabljeno), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity 100 Liters Compressor has been replaced!! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This device is ideally suited for material testing, climate testing, as well as temperature and humidity simulation in industrial settings, laboratories, or R&D departments. The test chamber enables precise testing conditions ranging from extreme temperatures to high humidity levels. Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in workspace center: ± 0.3 to ± 1 K Spatial temperature uniformity (reference to set value in range tmin to +150°C): ± 0.5 to ± 2 K Temperature change rate Heating: 3.5 K/min Cooling: 3.5 K/min Heat compensation: max. 700 W Specifications for climate testing: Humidification system data: Tank capacity: approx. 13 l Water quality: demineralized pH value: 6 – 7 Conductivity: max. 20 μS/cm Water consumption at constant temperature +40°C, 92% RH: 2 l / 24 h Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature fluctuation in workspace center: ± 0.3 to ± 0.5 K Spatial temperature uniformity (to set value): ± 0.5 to ± 1.5 K Temporal humidity deviation in workspace center: = 1 to ± 3 % RH Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical loading data: Maximum load of chamber floor: 10 kg Per shelf: 10 kg Total shelf loading capacity: 50 kg Operational data: Chamber illumination: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230V ±10% 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Fuse (external): 16A slow Protection category: Control cabinet IP 22 and control panel IP 54 Heat dissipation for air-cooled test chambers: Max. heat output to environment: 2,500 W Noise measurement: Sound pressure level (free-field measurement at 2 m from front and 1.0 m height): approx. 59 dB(A) Port: Feed-through: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerant: R404A / R23 Chamber volume: approx. 100 liters Weight: 210 kg Nodpfx Afoyw Nnfegecp Important information for you as a buyer for your safety! The following steps are performed in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) For further questions, we are happy to assist you by phone.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta 3 vedra po 800 kg Ncedpfjxd H Itjx Afgep

Stanje: dober (rabljeno), Leto izdelave: 2013, Schleifdurchmesser 390 mm Schleiflänge 650 mm Spitzenhöhe 200 mm Gesamtleistungsbedarf 46 kW Maschinengewicht ca. 6 t Raumbedarf ca. 3x3x2,4 m Universal-Rundschleifen - Typ WUG21 (W27) Schleiflänge 650 mm EMAG Weiss steht für High-End-Technologie beim Universal-Rundschleifen zwischen Spitzen. Von der CNC-gesteuerten Maschinen WUG 21 bietet EMAG Weiss die passende Lösung für nahezu jeden Anwender. Ncjdpfx Afsw Inr Njgep --> Technische Daten Schleiflänge max.: 650 mm --> Spitzenhöhe: 200 mm --> Schleif-Ø außen: 1-390 mm --> max. Gewicht fliegend MK4: 100 kg --> max. Werkstückgewicht zw. Spitzen: 250 kg --> Zustellung: --> X-Achsenweg: 480 mm --> Z-Achsenweg: 1.150 mm --> Werkstückspindelstock --> Reitstock --> Schleifspindelspindelstock --> Kühlmitteleinrichtung, Fabr. HYFRA --> Bandfilter, Fabr. Knoll, Typ KF 200/1600 - Baujahr 2012, --> Ölnebelfilter, Fabr. Cobaron

Leto izdelave: 1978, stanje: rabljeno, številka stroja/vozila: 5181, Temperature range: +10 to +80°C Ncjdo Dq Adjpfx Afgop Usable space dimensions: Width 1200 mm, Depth 1600 mm, Height 1750 mm Electrical connection: 220 V Required space (WxDxH): 1550 x 1900 x 2200 mm Weight: 500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, pritisk: 13 letvica, 1 used steam boiler ----- Manufacturer : LOOS, Gunzenhausen Model : U-HD Heating surface approx.: 31 m² Max. output : 2,000 kg/h Max. permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Year of manufacture : 2001 Nedpfx Afowub Hbsgjcp Equipped with Weishaupt gas burner, gas control section, control cabinet, feedwater pump, water level gauge, steam and safety valve, and all existing coarse and fine fittings.

Stanje: zelo dobro (rabljeno), Weiss Type: WK 27'/50-150 Climatic Chamber Water-Cooled Technical Data: Test Chamber Designation: WK 27'/50-150 External Dimensions: Height 3500 mm, Width 3400 mm, Depth 6000 mm Control Cabinet Dimensions: Height 2000 mm, Width 2400 mm, Depth 400 mm Internal Dimensions: Height 3000 mm, Width 3000 mm, Depth 3000 mm Floor Load Capacity: 30000 N/m² (Surface Load) Test Chamber Volume: Approx. 27,000 Litres Sample Mass: 1000 kg Cooling/Heating Operation: -50°C to 150°C Nodpfevx Nfbox Afgocp Heating Rate: 1.0 K/min Cooling Rate: 1.0 K/min Temperature Stability: ±0.3 to 1.0 K (Over Time) Temperature Stability: ±0.1 to 0.5 K (Over Time) Climatic Operation: 10 – 90°C Humidity: 10...98% rH Temperature Stability: ±0.1 to 0.5 K (Over Time) Dew Point Range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7000 kg Refrigerants: R23 and R404A With additional base plates to increase floor load capacity Important Safety Information for Buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) Further questions gladly answered by phone.

Stanje: dober (rabljeno), Weiss Type: Walk-in Climate Simulation Chamber WK 50 / 40-120 Technical Data Climate Chamber: Temperature range: -40...+120 °C Temperature tolerance: +/- 0.5 °C Temperature change rate: 1 K/min Humidity range: 15...approx. 95 % r.h. Humidity tolerance: +/- 5.0 % r.h. Dimensions: Test chamber volume: 50 m³ External dimensions (W x D x H): approx. 4800 mm x 6100 mm x 2640 mm Test chamber (W x D x H): approx. 4500 mm x 5000 mm x 2200 mm Door opening (W x H): approx. 3000 mm x 2200 mm Condition: used Scope of delivery: (See picture) Ncsdpfouvi R Aex Afgop (Subject to changes and errors in technical specifications. All data provided are subject to confirmation!) For further questions, please feel free to contact us by phone.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: Na voljo je tipska ploščica, 100,000-liter tank, used, double-walled, in good condition, immediately ready for use, cleaned – certificate from certified specialist company available. Length: 15.74 m Diameter: 2.90 m Ncodpfx Afouzvyujgop Height: 3.10 m (transport height) - Access ladder - Platform with guardrail - Welded saddle supports - Ventilation - Overfill prevention device - Dipstick - Leak detector Loading and transport can be arranged. Only serious and legitimate inquiries will be answered. Please provide your name, email address, and phone number.

Leto izdelave: 2019, stanje: dober (rabljeno), Weiss Model: WK 10/40-80 Modular Climate Test Chamber Weiss WK 10/40-80 Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and accumulator testing (e.g., lithium-ion): • Pressure relief flap for controlled pressure discharge in the event of a fault • Gas warning system for early detection of critical gas concentrations • Fire suppression system with SalgroMAG aerosol extinguishing generators This equipment considerably increases safety during battery tests and supports use in development and test environments (subject to the customer’s safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, model WK 10/40-80, year of manufacture 2019. The system is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system enables temperature and humidity testing over a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: • Functional and endurance tests • Material and component testing • Pre-aging and climate simulation • Conditioning of samples • Testing of batteries and accumulators (e.g., lithium-ion) under defined environmental conditions (with appropriate customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and run automatically. The unit was in operation until recently and is fully functional. General: Manufacturer: Weiss Umwelttechnik GmbH Model: WK 10/40-80 Nsdeygvw Repfx Afgocp Year of manufacture: 2019 Condition: used, fully functional CE marking: available Made in Germany Control system: S!MPAC® control Webpanel / touch operation Program and time control possible Temperature & Climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10% to 95% RH Humidity accuracy: ± 5% Dimensions: External (W×D×H): approx. 3300 × 5000 × 2500 mm Internal (W×D×H): approx. 3000 × 2200 × 1500 mm Media & Systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10%, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating manual (German) Type plate & documentation Condition: used Scope of delivery: (see pictures) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Razpršilnik prahu je sestavljen iz lijaka in vibracijskega podajalnika, ki razporedi granulat v širini 130 cm in enakomerno premaže tiskani transfer papir na spodnjem transportnem traku z mrežastim pasom širine 140 cm ter dolžine 150 cm. Stroj je nastavljiv po višini od 88 do 100 cm in ima skupno dolžino 150 cm. Podajalnik prahu kot tudi transporter sta individualno nastavljiva za optimalno obdelavo. Odvečen prah se učinkovito odstrani s kombinacijo zračnih tokov, razpršilnega mehanizma in ščetkanja. Tihi, avtomatski samočistilni filtrirni sistem reciklira granulat nazaj v lijak za ponovno uporabo ter odvaja filtriran zrak. Da bi zmanjšali vpliv statične elektrike sta čez transporter nameščeni dve antistatični palici. Njdpfxox R N Uro Afgocp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, moč: 600 kW (815,77 KM), 1 used Weishaupt oil burner ----- Model : WM-L20 / 2-A Version : R Njdpsuugwcefx Afgjcp NOx Class : 2 Output : 600 - 2,100 kW Oil throughput : 50 - 176 kg/h Year of manufacture : 2010 with WFM 100

Stanje: zelo dobro (rabljeno), Weiss Model: WT11-340/40 Weiss Temperature Test Chamber, Air-Cooled Temperature range: -40°C to +180°C Temporal temperature fluctuation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (heating): 2.3 K/min Temperature change rate (cooling): 1.6 K/min Heat compensation: max. 1000 W Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1800 mm, Width 895 mm, Depth 1810 mm Ncodpfxjytqnqe Afgjp Test chamber volume: approx. 335 liters Rated voltage: 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.9 kW Rated current: 9.0 A Refrigerant: R404A Weight: approx. 490 kg Important information for your safety as a buyer! The following steps are carried out on our listed chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and details subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Leto izdelave: 2013, stanje: rabljeno, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Useful volume: nominal 1200 liters Interior dimensions: 1310 x 675 x 1410 mm (W/D/H) External dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 by Weiss Technik is a highly flexible plant growth chamber, specifically designed for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable space while requiring minimal footprint. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touchscreen panel. Humidity: Optional humidification up to 80% r.h. (relative humidity) available. Dehumidification: For seed storage, the system can lower the humidity to as little as 15% r.h. at 4°C. Useful volume: The chamber has a nominal volume of approx. 1200 liters. Maximum growth height: Without intermediate shelves, the maximum growth height is up to 1275 mm (dependent on specific LED or lamp configuration). Footprint: Thanks to its shallow depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Ncodeyu Svlspfx Afgop Item condition: Used item as shown in the pictures. If you have any questions, please contact us.

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Please contact me for further information. Ncedpjk Nn Ilofx Afgjp

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, največja hitrost vrtenja: 18.000 obr/min, WEISS / SPL motorizirana vretena HSK-A63 175389A 18000 obr/min Proizvajalec: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Tip: motorizirano vreteno Tip vretena: 175389A Nosilec orodja: HSK-A63 SPL tip: DR-WE-175-M-W-18-46 Serijska številka: 60201670 Leto izdelave: 2008 Nedpfxoyrz Ryj Afgecp Maksimalno število vrtljajev: 18000 obr/min Motor: AC135/200/4 Stopnja zaščite: IP54 Hlajenje: vodno hlajenje Pretok hladilne vode: 8 l/min Senzor temperature: KTY 84-130, PTC Premer D1: 179,7 mm Premer D2: 262 mm Premer LB: 285 mm Skupna dolžina L: 1026 mm Številka rezervnega dela: 90010000013