Rezervoar za shranjevanje

Tank Lagertank Stahltank

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Blodpfx Afsw Sy T Hsnsd Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 990 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 3.900 mm, vhodni tok: 63 A, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, moč: 15 kW (20,39 KM), Oprema: dokumentacija / priročnik, Pelletizing plant for a wide range of materials, such as wood, Miscanthus, agricultural by-products and waste products (hay, straw, corn stalks, etc.), and feed. This is a complete plant built on a base frame and consisting of the following components: - Raw material storage bin, 4m³, including agitator. This has been expanded by approx. 3–4m³ using wooden panels. Blsdexv Dkcepfx Afnod - Intermediate auger to the hammer mill - Hammer mill (11 kW) for processing wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing, and level control - Dosing container for pressing aids, feeds into inclined mixer - Dosing screw conveyor for optimal material feed to the press (speed-controlled) - Press, 15 kW, including full indicator, temperature monitoring, and discharge chute - Conveyor belt to the dedusting screen - Dedusting screen with material outlet at 3 m height The system is designed for easy extension with a second press, each 15 kW. The entire plant is centrally operated via Siemens PLC with touch display. All parameters are monitored to ensure the press is safely shut down in case of faults. Remote maintenance allows operation and monitoring of the press from any PC. The chip dryer, shown on photo 2 mounted on the wall with discharge and control unit, is also for sale. Please contact us for further details.

Stanje: zelo dobro (rabljeno), Several 150 m³ steel storage tanks (firefighting water tanks), installed underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are retrofitted as underground firefighting water tanks according to DIN 14230: Each tank is equipped with a firefighting water suction connection according to DIN 14244, featuring a mounted fire brigade coupling/fixed coupling A in accordance with DIN 14319, version Form B, without a dip tube. Additionally, the tank features a vent flange connection (NW/DN 100) with cap, with an overall length of approx. 1,300 mm, suitable for 800 mm earth cover and 500 mm above ground level. - The tanks are emptied, cleaned, and factory-coated on the outside with bitumen by us. - Upon request, we can provide the tank with a full internal bitumen-based corrosion-resistant coating or epoxy resin internal coating. Cost-effective delivery is possible with our own truck. Simply let us know the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. If you require further information, please call us or send an e-mail to b.barth (at) barth-tank.de Bsdjfnh Tgopfx Afneld

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.200 l, skupna višina: 6.000 mm, notranji premer: 2.800 mm, skupna masa: 1.400 kg, TEHNIČNE ZNAČILNOSTI - Posoda z ravnim dnom, naklon 2 % - Blagovna znamka: ALFA LAVAL - Skupna prostornina: 30 200 litrov - Material: nerjaveče jeklo 316 L - Notranja obdelava: hladno valjana - Zunanja obdelava: hladno valjana surova površina - Termoregulirana STREHA - Konična - 1 ekscentrični dimnik spredaj Ø 200 mm - 2 nerjaveča zastavica - 1 termometer - 6 dvigalnih obročev OBROČ - 1 ovalna vrata 310×420 mm - 1 ventil za delno praznjenje DN 65 Bsdpfov I A Nlox Afnold - 1 priključek za sondo za merjenje nivoja DNO - Nagnjena plošča 2 % z odtokom - 1 ventil za popolno praznjenje s pokrovčkom PRILOGE - Rezervoarji, združljivi in primerni za shranjevanje tekočih gnojil - 6-mesečna garancija - V skladu s standardi CE

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), - RABLJEN - REZALNI STROJ S VLAKNENSKIM LASERJEM S PALETNIM IZMENJEVALCEM X-OS POMIK: 3048 mm Y-OS POMIK: 1524 mm Z-OS POMIK: 150 mm HITRI PREMIKI X-Y-Z: 100 - 100 m/min DELOVNO PODROČJE: 3000 x 1500 x 150 mm VIR: IPG Fiber 4000 ; 4000 W KRMILNA ENOTA: PRIMACH 30L TEŽA: 10000 kg Blsdpfx Afjvghb Djnsd SKUPNE MERE: 10500 x 3400 x 2200 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 288, Odluščevalnik z dovodnim trakom, za največji premer hloda do 460 mm ali 600 mm, hitrost do 100 m/min, reducirni rotor in odluščevalni rotor. Odluščevalni rotor z odprtino 620 mm je NOVO IZDELAN, z garancijsko dobo. Vključuje napravo za menjavo reducirnega rotorja. Na spodnjih fotografijah je stroj v trenutnem stanju – demontiran. Dobavni rok je 3 mesece od naročila. Bodpfxstk N Dke Afnjld

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request. Bedpfod Szf Njx Afnjld

Stanje: dober (rabljeno), Leto izdelave: 2000, Zum Verkauf: AXYZ 4010 CNC-Fräse (Baujahr 2000) – Hergestellt in Kanada, zuverlässig & vielseitig Wir bieten eine gebrauchte AXYZ 4010 CNC-Fräse, Baujahr 2000, hergestellt in Kanada, zum Verkauf an. Diese CNC-Fräse ist bekannt für ihre Langlebigkeit, Präzision und Vielseitigkeit und eignet sich ideal für verschiedene Schneid-, Gravur- und Fräsanwendungen. Die Maschine wurde regelmäßig gewartet und befindet sich in einem guten, voll funktionsfähigen Zustand – eine kosteneffiziente Wahl für Unternehmen, die ihre Bearbeitungsmöglichkeiten erweitern möchten. Technische Daten & Ausstattung: Arbeitsbereich: 1220 mm x 2540 mm (48" x 100") Tisch: Vakuumtisch Spindeltyp: 2x Hochgeschwindigkeits-Frässpindeln Steuerung: AXYZ eigene CNC-Steuerung Antriebssystem: Schrittmotorantrieb für präzise Bewegungen Materialverträglichkeit: Geeignet zum Bearbeiten von Holz, Kunststoffen, Aluminium, Verbundwerkstoffen und mehr Bsdpfxovzague Afnsld Softwarekompatibilität: Kompatibel mit gängiger CAD/CAM-Software Hergestellt in: Kanada Zustand: Gebraucht, in gutem, funktionsfähigen Zustand Ihre Vorteile: Kanadische Qualität: Gefertigt nach hohen Industriestandards für Zuverlässigkeit und lange Lebensdauer. Präzision & Effizienz: Für präzise Fräs- und Gravurarbeiten mit hoher Genauigkeit ausgelegt. Vielseitige Einsatzmöglichkeiten: Ideal für Beschriftungen, Holzverarbeitung, Prototypenbau und leichte Metallbearbeitung. Kosteneffiziente Investition: Preiswerte Alternative zur Anschaffung einer neuen CNC-Fräse. Die AXYZ 4010 CNC-Fräse ist die perfekte Ergänzung für Werkstätten, Schildermacher und Metall- oder Holzverarbeitungsbetriebe, die zuverlässige Maschinen zu einem attraktiven Preis suchen.

Leto izdelave: 2019, Stanje: novo, The items for sale are Steritech AV20 autoclaves. Manufacturer: Steritech Year of manufacture: 2019 / New Model: AV 20 Capacity: 6 trolleys Bsdpfxouabr Do Afneld Operating temperature: 158°C Operating pressure: 5 bar Control system: Siemens Simatic

Stanje: zelo dobro (rabljeno), 200m³ stainless steel tanks Number of units: 3 Bledpfofngl Nsx Afnsd 180m³ stainless steel tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Base thickness: 5.1 mm We offer transport to all regions of Europe with our specialized trailer!