Dvostranski skobeljnik WEINIG UNIPLAN

WEINIG uniplan

Stanje: delavnici obnovljeno (rabljeno), Working width: 230 mm Working height: 15–120 mm Number of spindles: 2 pcs. Weinig Hydro Planer Type Uniplan 23 ----- Machine factory-refurbished by Weinig in 2024. Description: For double-sided horizontal wood processing with 2 working spindles. Njdpfx Alexpn Tzotjwi Spindle arrangement: horizontal, bottom and top. Both horizontal spindles are equipped with hydraulically tensioned counter-bearings without axial adjustment. Integrated straight jointers on both spindles with automatic stone feed, remotely operable with closed hood. Machine with continuous, chainless feed system equipped with rubber rollers. Electric height adjustment of spindles according to mechanical digital display (SIKO). Limit switch for height adjustment. Feed roller pressure pneumatic. Stops and table plates non-adjustable. Machine with steel table plates. Machine fully enclosed with integrated sound and dust protection, including internal lighting. Electrical execution according to DIN VDE 0113, electrical equipment for industrial machines EN 60204, IEC - 204 - 1. No other electrical regulations considered. Machine includes operating tools, but no processing tools. The spindles of the Weinig Uniplan operate at a speed of 7,200 revolutions per minute. Please check before using existing tools whether they are suitable for this speed. Please also take this into account when ordering new tools. Technical specifications: Working width max.: 230 mm Working height min.: 15 mm, max.: 120 mm Feed motor: 3 kW (4 HP) Each horizontal spindle: 7.5 kW (7.5 HP) Feed speed, stepless: 6–36 m/min Spindle speed: 7,200 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool diameter: 163 mm Fixed clamping offset below: 0.5 mm (Technical data according to manufacturer – subject to change!)

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives Nwodpfxohuthys Altei immediately ready for operation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Weinig hidro-fina skobeljna Uniplan 23 Letnik: 2004 Delovna širina: 230 mm Delovna višina: 120 mm 1. vreteno spodaj: 7,5 kW 2. vreteno zgoraj: 7,5 kW Nwsdpfxezg Euqo Altji

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Njdpfoxpn Tusx Altowi Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: kot nova (razstavni stroj), Število vreten: 6 kosov Delovna širina: 250 mm Višina stroja: 150 mm Dolžina strojne mize: 2500 mm Moč motorja za podajanje: 4 kW Hitrost podajanja: 6-24 m/min Nwjdovnv Ubopfx Altsi Teža: 4770 kg Dimenzije (dolžina/širina/višina): 4722x1860x1776 mm Kuper SWT XL-6, štiristranska strojna glodalica, izvedba za okna z elektronsko aksialno in radialno nastavitvijo vreten. ----- Robustno podvozje stroja, odporno na torzijo in z nizkimi vibracijami. Število vreten: 6 Delovna širina: 250 mm Višina stroja: 150 mm Dolžina strojne mize: 2500 mm Število vrtljajev vreten: nastavljivo s frekvenčnim regulatorjem, 4.000 - 8.000 vrt/min Hitrost podajanja: 6-24 m/min Podrobno opis najdete v priloženi datoteki PDF! ----- (Tehnične specifikacije po navedbah proizvajalca – brez jamstva!)

Stanje: zelo dobro (rabljeno), Two-sided planer Weinig Uniplan Planing width: 220 mm Planing height: 15–120 mm Horizontal spindle power: 2 x 5.5 kW Spindle speed: 6,000 rpm Spindle diameter: 50 mm Spindles supported on both sides Feed speed: 6–32 m/min Nwodpfjrxuvqex Altsi Feed motor: 3 kW

Stanje: rabljeno, Število vreten: 4 + 2 kos. Delovna širina: 230 mm Višina skobljanja: 120 mm Hitrost podajanja: 5–24 m/min. Skobljalna linija Weinig tip Unimat 23 E + Uniplan 23 ter vključno z vračalnim transporterjem. NC-krmiljena linija za skobljanje in profiliranje okenskih letev z izrezom steklenih letvic ali drugih skobeljnih nalog, z avtomatskim vračanjem obdelovancev k upravljavcu. Vreteno 1: 7,5 kW / 50 mm / 8.000 obr/min Vreteno 2: 11 kW / 50 mm / 8.000 obr/min Vreteno 3: skupni motor z vretenom 2 / 50 mm / 8.000 obr/min Vreteno 4: 7,5 kW / 50 mm / 8.000 obr/min Vreteno 1 Uniplan: 5,5 kW / 50 mm / 7.200 obr/min Nwjdox An R Tspfx Altsi Vreteno 2 Uniplan: 5,5 kW / 50 mm / 7.200 obr/min Upravljanje: PC-krmiljenje Nexus NC-osi: Unimat 2 & 3, Uniplan 1

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure Nodpfx Alsu Agh Sjtswi 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: rabljeno, Available: No. 1 and No. 2 Nwsdet Snzwepfx Altji Used control cabinet from a Weinig Uniplan type, suitable as a source for spare parts or for building a new control cabinet with operator panel.

Stanje: rabljeno, Delovna širina: 230 mm Delovna višina: 120 mm Število vreten: 2 kos. Nwjdpfst Rmbmjx Altsi Kontra ležaj: Da Jointer: Da Paket za kratke kose: Da Razporeditev vreten: Spodaj (7,5 kW) – Zgoraj (7,5 kW) Hitrost vretena: 7.200 obr/min Premer vretena: 50 mm Podajalnik: 3 kW // max. 36 m/min Hidravlični fini skobeljni stroj Weinig Uniplan 23 za obojestransko površinsko obdelavo, kot alternativa brušenju (npr. v izdelavi oken), z visokozmogljivimi vreteni. - Zelo dobro originalno stanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, ser. št. 2603-624, letnik 1981 z pohodno zvočno zaščitno kabino KASCHWIG – SKORAJ NOVA iz leta 2017 • Kratka dovajalna miza s težkim 6-valjnim podajalnikom 1. Vreteno spodaj 11,0 kW 2. Vreteno desno 11,0 kW 3. Vreteno levo 11,0 kW 4. Vreteno zgoraj 15,0 kW 5. Vreteno spodaj 11,0 kW 6. Vreteno spodaj 11,0 kW • Hidravlični podajalnik 6-60 m/min. • Podajalni motor 22,0 kW • 4 x pogonski mizni valji • Premer vretena 50 mm Nsdpstkt Tpefx Altjwi • Avtomatsko mazanje mize • Vreteno 1 + 4 + 5 + 6 z nasprotnim ležajem • Vreteno 1 + 4 z direktnim ravnalom • Podajalni valji 170 mm • 4 kosi hidro skobeljnih glav 150 mm • 6 kosov hidro skobeljnih glav 250 mm • Odsesovalni nastavek nad strojem