Štiristranski skobeljni stroj WEINIG tip Profimat 23

Weinig Profimat 23

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, število vreten: 5, vhodna frekvenca: 50 Hz, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW Nodsvgnb Rspfx Abksdd 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW Nedpfxjtynpxj Abkodd • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: rabljeno, Planing and profiling machine Weinig Profimat 23, designed for four-sided planing and profiling with a universal spindle, suitable for pre-planed timber or other angular (squared) workpieces such as MDF or plastic parts. The jointer spindle can be retrofitted if required. Spindles: 5 Spindle 1: Right (7.5 kW) Spindle 2: Left (motor shared with spindle 1) Spindle 3: Top (7.5 kW) Nodpfoxu H R Ajx Abkodd Spindle 4: Bottom (5.5 kW) Spindle 5: Universal (5.5 kW) Working width: 170 mm Working height: 120 mm Spindle diameter: 35 mm Feed: 2.2 kW // 5-24 m/min Number of spindles: 5 Jointer table length: 2,000 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Planer and moulder Manufacturer: Weinig Model: Profimat 23 Year of manufacture: 1995 Working width: 230 mm Working height: 120 mm Surfacing table length: 2,000 mm Spindle speed: 6,000 rpm Spindle diameter: 40 mm Feed speed: 4 - 24 m/min Number of spindles: 6 Ndjdpfx Abev Id Ngjkjd Grooving saw: Yes Spindle arrangement: bottom - right - left - right - top - bottom - grooving saw 1st spindle, bottom, 7.5 kW 2nd/3rd spindle, right, left, 7.5 kW each 4th spindle, right, 7.5 kW 5th spindle, top, 7.5 kW 6th spindle, bottom, 4.6 kW Grooving saw: 2.2 kW Dimensions: approx. 4,500 x 2,000 x 1,800 mm Weight: approx. 3.5 t

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 7.792 h, nosilnost: 4.000 kg, dvižna višina: 5.650 mm, težišče tovora: 500 mm, vrsta goriva: plin, Certificirano po DGUV do: 11/2025, dolžina vilic: 1.600 mm, stanje pnevmatik: 95 odstotek, lastna masa: 7.183 kg, barva: rumena, We are offering an absolutely top-class forklift from Jungheinrich. In 2021, it underwent a full 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is original and has not been resprayed or touched up! The forklift has always been kept indoors and is in excellent condition. Maintenance and safety inspection (UVV) are up to date. The manual and keys are of course included. The last major service was in October 2024 Ndjdpfx Aow N Iz Hjbked UVV valid until 10/2025 Operating hours: 7,792 (77,44 since refurbishment) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star overhaul in 03/2021, complete with Kaup fork positioner T466 Load capacity: 4,000 kg Lift height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load centre: 500 mm Mast: Triplex with full free lift Equipment: Solo-Pilot control, road approval lighting (StVZO), LED configuration with two work lights front and rear, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, additional hydraulics with 2 functions Kaup fork positioner NEW 4.8T 466B Since its overhaul, the machine has only operated for 45 hours. All safety inspections and maintenance have been carried out.

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig four-sided planer Profimat 23 window version with glazing bead separation or can be used as a grooving spindle. ATS control and program control ----- In 2024, the machine was factory-refurbished by Weinig. Njdpfx Aexpn T Uobkodd Technical data summary (possibly including additional accessories – please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically activated up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatic up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Additional features ----- > Glazing bead separation or usable as grooving unit > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of the right spindle and glazing bead separator via manual selector switch on the control panel > Spindles with mechanical digital display (technical data as per manufacturer – subject to confirmation!)

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 90816, Tehnične lastnosti: Ndjdpfx Asxp U R Hebkjd 1. vreteno: spodnje vodoravno, 2. vreteno: desna čelilna glava, 3. vreteno: leva čelilna glava, 4. vreteno: zgornje vodoravno, 5. vreteno: spodnje vodoravno, 6. vreteno: univerzalno, ATS nadzor, Poljubna širina, Največja širina: 230, Največja višina: 120.

Stanje: zelo dobro (rabljeno), Heating boiler Loos UT 5200 kW incl. oil burner Ndodpfomn Hpyex Abksd

Stanje: rabljeno, Leto izdelave: 2002, Weinig štiristranski skobeljni stroj maks. širina skobljanja 230 mm maks. višina skobljanja 120 mm Digitalno pozicioniranje Ndsdpfoxg Nbuex Abkjd 5 postaj + 1 izhodna enota za zaokroževanje ali posnemanje robov Skupna moč 43 kW 380 V

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Nodpfx Aerigxyobkedd Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with two-axis control for left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment for upper spindle: electrical Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable up to 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Ndedpfowwwkhjx Abkod Max. planing depth: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control type: PLC control Spindle position display: mechanical numeric indicator Infeed rollers before jointer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with internal light Location: Nattheim

Stanje: zelo dobro (rabljeno), Four-Sided Planer Weinig Profimat 23 Fortec Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle arrangement: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Nedpfxoumxqre Abkodd Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certified

Stanje: rabljeno, Število vreten: 8 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Weinig skobljalna linija ----- Sestavljeno iz naslednjih posameznih strojev: Poz. 1: Weinig Profimat 23 E, štiristranski skobeljni stroj, številka zaloge: 2803 5 vreten + žaga za steklene letve Ndedpfexpn Tuex Abkjd Poz. 2: Weinig Uniplan 23, številka zaloge: 2804 Fini in hidro skobeljni stroj z 2 horizontalnima vretenoma Poz. 3: Weinig RF 15, številka zaloge: 2805 Vzdolžno-prečno-vzdolžni transporter z vračanjem obdelovanca k operaterju Podrobni opisi strojev so na voljo pod navedenimi številkami zaloge. (Tehnični podatki po navedbah proizvajalca, brez jamstva!)

Stanje: rabljeno, Leto izdelave: 2014, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles electronically adjustable for width and height Detailed description: ----- Technical specifications: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 125–145 mm Tool circle rabbet cutter: 130–160 mm Axial adjustment range: 5 mm Rabbetting device MarathonCoatin for table insert in front of the 1st lower tool holder Electronic digital display for radial adjustment 2nd spindle – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Ndsdpowzmu Rofx Abked Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm 3rd spindle – left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle 40 mm below table level: 93–200 mm Tool circle 55 mm below table level: 93–180 mm Max. tool diameter for straight knife heads: 163 mm Max. profiling depth: 35 mm Axial adjustment range: 55 mm Radial spindle CNC controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. tool diameter for straight knife heads: 180 mm Max. profiling depth: 35 mm Axial adjustment range: 40 mm Radial spindle CNC controlled Segmented pressure shoe in front of upper tool holder, adjustable to tool circle and can be swung away from the tool, spring-loaded. Pressure shoe before and discharge after the top spindle with electronic digital displays, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool circle: 93–200 mm Max. profiling depth: 15 mm Axial adjustment range: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller in front of 1st lower cutter pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment path of feed rollers relative to left tool holder, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380-420 V), 50 Hz All spindles in IE2 design Electrical equipment according to DIN VDE 0113, electrical equipment for industrial machines EN60204, IEC-204-1. Other electrical regulations not considered.

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available Nsdpsu Su Husfx Abkjdd (technical data according to manufacturer – subject to prior sale and not guaranteed!)