Formier

Weinig Hydromat 25R 100m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, working width 250 mm working height 140 mm 8 heads 3 toothed feed rollers on the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom Dedpfjww H Rwox Abvsup variable feed speed up to 100 m/min spindle diameter 50 mm spindles supported on both sides feed via cardan shafts spindle speed 6000 rpm pneumatic pressure on feed rollers head adjustment in two axes cast iron body

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame Duedpfxjd Szf Ne Abvep High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, number of engines: 4+4 Duodpfsw D Nq Tox Abvop opening: 6 metres

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 80 mm, skupna širina: 1.250 mm, skupna dolžina: 40.750 mm, transportna dolžina: 40.750 mm, moč: 1,1 kW (1,50 KM), razmak med vrstami: 160 mm, razmak osovin: 160 mm, višina okvirja: 185 mm, širina okvirja: 85 mm, Pallet Roller Conveyor / Roller Conveyor / Pallet Conveyor Technology Manufacturer: Claus Maschinenbau Condition: Used Drive Type: Chain Drive The system consists of 9 segments: 6 x approx. 5.75 m length Dujdpfetrv Anjx Abvsp 1 x approx. 5.30 m length 1 x approx. 2.00 m length 1 x approx. 0.95 m length Each element is equipped with its own motor. Total length: approx. 40.75 m Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roller diameter: approx. 80 mm Axles / Axle spacing: approx. 160 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: Blue Including pallet guide Including SEW drive motor (1.1 kW) Including height-adjustable feet The conveyor system was operational until dismantling. Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors or telescopes for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on design or assembly questions. Simply let us know your requirements and the site conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in various sectors, such as logistics, the pharmaceutical industry, trade, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981, with walk-in KASCHWIG soundproof cabin – ALMOST NEW, year 2017 Dsdpetkt Tpofx Abvsup - Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW - Hydraulic feed 6–60 m/min - Feed motor 22.0 kW - 4 driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindles 1 + 4 + 5 + 6 with outboard bearing - Spindles 1 + 4 with straight jointer - Feed rollers 170 mm - Approx. 10 hydro planing heads included - Extraction hood above the machine

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences Djdpfx Aewvqklsbvsup • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: dober (rabljeno), Four-side planer WEINIG Model U17N 8 spindles Working width up to 170 mm Working height up to 120 mm Djdpfxsupkc Es Abvsup Feed speed infinitely variable, 6–36 m/min

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), A four-sided planer Weinig including automation, double crosscut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Automation unit Kellfass consisting of double crosscut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. An on-site inspection is possible. Dodjv T Apcopfx Abvjup

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, delovna širina 300 mm delovna višina 140 mm podajalna hitrost 200 m/min diamater vretena 50 mm razporeditev vreten: 1. spodnje - 22 kW 2. zgornje - 22 kW Dujdpjvu Sayjfx Abvop 3. desno - 18,5 kW 4. levo - 18,5 kW 5. desno - 18,5 kW 6. levo - 22 kW 7. zgornje - 22 kW 8. spodnje - 22 kW 9. zgornje - 22 kW 10. spodnje - 22 kW 11. spodnje - 22 kW Brez podajalnika - 125 000 €

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Predmet moje dražbe je tračni transporter dolžine 7,8 m in širine traku 0,48 m. Cena velja za 1 kos. Možnost prevoza. Duodpfx Abjvcl Nqevop