Oblikovalnik

WEINIG HYDROMAT 22 BL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, delovna širina: 220 mm, višina skobljanja: 140 mm, premer vretena: 50 mm, širina skobljanja: 220 mm, delovna višina: 140 mm, moč pogonskega motorja podajalnika: 15.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, vrsta nastavitve višine: električni, vrsta vhodnega toka: trifazni, število vreten: 7, vhodna frekvenca: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, Working height: 140 mm, Spindle diameter: 50 mm, Fpodpfx Aeulnr Ashmeh Feed: 15 kW / 6 – 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-Bottom (7.5 kW) with hydraulic clamping 2-Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-Bottom (7.5 kW) with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-Bottom (11 kW) with hydraulic clamping, straight jointer and profile jointer 6 powered feed rollers in the table

Leto izdelave: 1988, stanje: potreben popravila (rabljeno), Mehanizacija za dovod pred skobeljni stroj primerna za KVH/BSH itd. - Za dolžine do ca. 13 m - Idealna KVH+BSH naprava za pred skobeljni stroj - Vzdolžno razstavljanje – posamezno ločevanje kosov - Razrezne žage: 4 krožne žage s stranskim nastavljanjem Fpjdjvbtpspfx Ahmjh - Presek rezanja: 180 x 220 mm, 150 x 300 mm - Ena upravljalna oseba zadostuje

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Skobeljni stroj Weinig Hydromat 22 BL z avtomatskim odvijalnikom Fedpfxjyymqvs Ahmoph Leto: 1992 Podajalna hitrost: 60 m/min Glave: 1. spodnja – 11 kW 2. desna – 7,5 kW 3. leva – 7,5 kW 4. zgornja – 11 kW 5. spodnja – 7,5 kW 6. zgornja – 7,5 kW 6 pogonskih valjev v mizi Motor za podajanje – 15 kW Širina skobljanja – 170 mm Višina skobljanja – 120 mm Stroj na dvignjeni platformi.

Leto izdelave: 1987, stanje: pripravljen za uporabo (rabljen), A four-sided planer Weinig including automation, double crosscut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Automation unit Kellfass consisting of double crosscut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. An on-site inspection is possible. Fpjdpfxsv T Apce Ahmsh

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm Fpodpswvqkljfx Ahmjh • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Fodpfxov Si Szo Ahmjph Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: novo, Leto izdelave: 2022, Premer: 40–140 mm Motor: 2,2 kW Fsdpfx Ajdprvuehmeph Cena za kos

Stanje: pripravljen za uporabo (rabljen), Predmet moje dražbe je tračni transporter dolžine 4,5 m in širine traku 0,6 m. Možnost transporta. Fodsxgndhjpfx Ahmjph

Stanje: dober (rabljeno), Leto izdelave: 2000, Weinig High Mech E6 vnos + A5 iznos + zlagalnik 1. Weinig valjčni transportni trak za dovod paketov. 2. Weinig nagibni sistem za pakete. 3. Weinig prečni transportni trak z ravno verigo in enojnim podajalnikom desk. 4. Weinig sortirna enota za izločanje z valjčnimi tirnicami. 5. Weinig EM814 dovedna enota za skobeljni stroj z ravno verigo za podajanje. 6. Weinig izhodni pasovni pospeševalni transporter, dolžine 3 m. 7. Valjčni transportni trak s prečnimi potisniki na verigi. 8. Weinig prečni pasovni transportni trak z zalogovnikom. 9. Weinig zlagalnik z ravno verigo in dvižno škarjasto valjčno progo. 10. Weinig izhodni valjčni transportni trakovi za pakete. Možna dodatna ponudba z dodatnim Weinig vezalnim sistemom po potrebi. Fpsdpfx Aewgbw Rjhmoh

Leto izdelave: 1990, stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Fpedpfxopqxnxe Ahmoh