Prečna rezalna linija

Weinig Dimter Opticut S-50

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm Cgjdpow Sy T Hjfx Afnop (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Cgodpfx Aevupm Defnep Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: rabljeno, Cut Thickness Calculator for Band Sawmill Cutting Thickness Computer Alternative to Mudata control system with option for individual customization Industrial Touch PC Siemens Simatic S7 Compatible with rotary encoder or other measurement systems Cutting programs can be easily modified Cutting programs can also be grouped Software is customized according to customer requirements Operation possible via touch display or keyboard Next step in the cutting program can be triggered by button on the joystick All relevant values can be displayed individually on the display (e.g. total distance, next cut, complete cutting program, value of previous cut, feed rate, and more) All parameters can be displayed and modified on a dedicated parameter page or on the main screen The sensor for blade deviation monitoring can be evaluated (possible linkage with feed rate) Positioning via proportional valve and hydraulic motor or via stepper motor Inspection during operation is also possible on request Cgedpfjiwaxnsx Afnop Currently in operation on Primultini SGA 1300 CEB Suitable for any carriage size and any make For an appointment or further details, please just call.

Stanje: rabljeno, Popolnoma sestavljena in delujoča linija za proizvodnjo peletov s kapaciteto do 3 ton na uro je naprodaj. Tovarna je zelo malo rabljena – proizvedla je le 16.000 ton in je v zelo dobrem tehničnem ter vizualnem stanju. Idealno za profesionalno proizvodnjo peletov iz lesne biomase, agrobio mase ali drugih surovin. Za montažo obrata niso potrebni dodatni prostori, saj je peletirni stiskalnica že vgrajena v kontejner. Linija vključuje: Cgjdpfx Afjx S Egmjnop - Stiskalnico in mlin Salmatec Maxima 700 – zanesljiva nemška kakovost z visoko učinkovitostjo in dolgo življenjsko dobo. - Transportna in dozirna oprema Rematec – robustna in natančna dobava materiala v vseh fazah. - Šotorsko pokritje. - Dodatna oprema: cikloni, sita, hladilnik, kontrolna plošča itd. Na voljo so vsi DWG načrti in risbe za temelje opreme. Glavne prednosti: - Velika proizvodna zmogljivost – do 3 t/h. - Komponente visoke kakovosti evropskih proizvajalcev. - Možnost prilagoditve za različne vrste surovin. - Linija je v obratovalnem stanju – možen je prikaz delovanja. - Takoj dobavljivo.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 2.050 mm, vrsta nastavitve višine: pnevmatičen, višina skobljanja: 300 mm, 4-sided planer, working width: 2200 mm mounted on a rotary table for curved workpieces Cjdpew A A Ebsfx Afnegp machine is enclosed

Stanje: novo, Leto izdelave: 2025, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve the perfect foundation. The T54 was developed precisely with this goal in mind. It enables you to easily plane workpieces at the most modern standards and safely fit them with accurate angled edges. The machine comes as standard with a TERSA solid steel cutter block. The Xplane cutter block with shear-cut action is available as an option. Chamfering is effortless, as the user-friendly single-handed adjustment allows any angle between 90° and 45° to be quickly set. The robust cast iron tables of the T54 provide a secure platform, even for large and heavy workpieces. If additional support surface is required, both the infeed and outfeed tables can be extended by 380 mm each—also made of cast iron, of course. Cgedepq If Djpfx Afnjp Technical Data Table width: 500 mm Table length: 2840 mm Maximum cutting depth: 8 mm Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 Rotation speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Electrically driven table adjustment Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel Xplane cutter block with 3 spiral knife rows (each row with 26 domed carbide knives; 2 counter knives), includes full knife set and a Torx T20 T-wrench; spindle speed 6,000 rpm included. The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex-stock 54634 Bitburg - immediately available -

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Cjdpjh Ayyqsfx Afnogp Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Stanje: rabljeno, Leto izdelave: 2021, premer žaginega lista: 800 mm, vrtljajska hitrost (min.): 1.450 obr/min, moč: 5,5 kW (7,48 KM), Cut-off Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm Sturdy steel tube base frame Cgodpfx Asd Szf Nefnjp High-performance saw motors Pneumatic material clamps (3 units, vertical) Two-hand safety controls Coolant system Protective cover Optional with length measuring system or automatic positioning system Available as a saw-drilling automatic machine or saw-punching automatic machine on request.

Stanje: rabljeno, Leto izdelave: 2010, Chalet Construction Machine used, good condition, low hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 Cgjdpovwfqqsfx Afnep CE type-tested Up to 140 mm round timber corner joints Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Sale in "as-is" condition as inspected, without guarantee or warranty

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Leto izdelave: 1998 Lokacija: Francija, Savoja Codpfewmm Alex Afnjgp