WEILER - stružnica

WEILER Matador VS 2

Stanje: pripravljen za uporabo (rabljen), Drežna dolžina 500 mm Drežani premer nad ležiščem 297 mm Drežani premer nad podporo 160 mm Vrtina vretena 36,0 mm Pritrditev DIN 55022 Gr. 5 Konica: 3 MK Hod konice 90,0 mm Število vrtljajev 30 - 3550 min⁻¹ Število vrtljajev motorja: 1410 / 2830 min⁻¹ Skupna potrebna moč 3,3 kW Napetost 380 V Teža stroja cca. 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm Iz šole za poklice – zelo dobro stanje (!!) Posebej primeren za srednje natančne obdelovance Oprema: - robusten stružni stroj z vodilnim in pogonskim vretenom - RÖHM trikrako vpenjalno glavo Ø 160 mm - preklopni zaščitni pokrov za vpenjalno glavo - ključ za vpenjalno glavo - MULTIFIX nosilec rezila A s 3 novimi vložki - pomičen konjiček - vrtljiva strojna svetilka - upravljalna plošča spredaj levo - avtomatski pomiki za čelni in zgornji suport - strojno podnožje z omaro (prostor za shranjevanje) - zaščitna zadnja stena proti ostružkom - gumb za nujni izklop - navodila za uporabo Psdpexq Hhyjfx Andegn

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Heidenhain ND 780, from a training workshop!! Pgedoy T Hqcjpfx Andsn Technical specifications: - Machine No.: 7702, Year of manufacture: approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: Morse taper 3 - Feed rates: 0.012 to 0.9 mm/rev - Thread types: Metric, Inch, Module, and Diametral Pitch - Metric pitch range: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping system for internal and external collets (see photo) - 1 piece three-jaw chuck, 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 piece bed stop - Change gears - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. Naturally, the machine is fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of this Weiler was a training workshop. The machine comes equipped with comprehensive accessories. Take the opportunity to inspect the machine under power on site and see its very good condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: >> Machine No. 88-8115, Year of manufacture: 1988 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor Psdpfsy Tmkvjx Andogn >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with New K&C 3-Axis Digital Readout, Special Light Grey Finish!!! Technical Data: >> Machine No. 92-027, Year of manufacture 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> New 3-axis K&C digital readout, 12-month manufacturer's warranty, supplied with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders Pgjdpfx Aeyylq Uondjn >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The lathe is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis K&C digital readout has been retrofitted. All scales are brand new and equipped with protective covers against dirt. All slides move smoothly and evenly. Take the opportunity to view and test the machine under power on site to verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feedscrew Lathe with Brand New K&C 3-Axis Digital Readout in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Cutting Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> K&C 3-Axis Digital Readout – Brand New, 12 months manufacturer's warranty; user manual included Functions: Metric/inch switch, coordinate selection ABS/INC, value halving function, reference mark setting, tool memory for 200 tools, taper calculation, radius/diameter mode, quick zeroing, count direction toggle Pedpfx Ajyylqhendogn >> 1 Three-jaw chuck, 1 set of jaws >> 1 Four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A quick-change tool post with 2 holders >> Motor brake >> Bed stop About the Machine: For sale is a Weiler Matador VS-2 in excellent condition. The machine is, of course, fully operational and has been newly repainted in light grey. This lathe is in very good condition. The K&C 3-axis digital readout has been retrofitted. All scales are brand new and fitted with protective covers to safeguard them against dirt. All slides move smoothly and uniformly. Take the opportunity to view the machine under power onsite and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C NEW in Special Light Grey Paint! Technical Data: >> Machine No.: 92-028, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg Pedpoyyb T Sefx Andogn >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of count switching, >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is of course fully functional and has been newly painted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and fitted with cover strips to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Stružnica Weiler Matador VS2, letnik 1992, trivrata glava, hitromenjalni sistem Multifix, zadnja zaščita proti škropljenju, električna zaščita glave. Stroj je v dobrem, delujočem stanju in ga je mogoče po dogovoru predstaviti pod napetostjo. Pjdex Sqvgjpfx Andjgn