Klasični stružnica

Weiler Matador VS2

Stanje: pripravljen za uporabo (rabljen), Drežna dolžina 500 mm Drežani premer nad ležiščem 297 mm Drežani premer nad podporo 160 mm Vrtina vretena 36,0 mm Pritrditev DIN 55022 Gr. 5 Konica: 3 MK Hod konice 90,0 mm Število vrtljajev 30 - 3550 min⁻¹ Število vrtljajev motorja: 1410 / 2830 min⁻¹ Skupna potrebna moč 3,3 kW Napetost 380 V Teža stroja cca. 620 kg Dimenzije D-Š-V 1420 x 700 x 1200 mm Iz šole za poklice – zelo dobro stanje (!!) Posebej primeren za srednje natančne obdelovance Oprema: Fpjdpfexq Hhysx Aahol - robusten stružni stroj z vodilnim in pogonskim vretenom - RÖHM trikrako vpenjalno glavo Ø 160 mm - preklopni zaščitni pokrov za vpenjalno glavo - ključ za vpenjalno glavo - MULTIFIX nosilec rezila A s 3 novimi vložki - pomičen konjiček - vrtljiva strojna svetilka - upravljalna plošča spredaj levo - avtomatski pomiki za čelni in zgornji suport - strojno podnožje z omaro (prostor za shranjevanje) - zaščitna zadnja stena proti ostružkom - gumb za nujni izklop - navodila za uporabo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, premer struženja nad prečnim suportom: 1.600 mm, stružna dolžina: 6.000 mm, premer struženja: 1.300 mm, moč vretenovega motorja: 100.000 W, skupna višina: 2.875 mm, skupna dolžina: 9.550 mm, skupna širina: 2.950 mm, teža obdelovanca (maks.): 40.000 kg, Premer struženja nad posteljo Ø 1600 mm Premer struženja nad sani 1300 mm Fpjdpfeymk E Ajx Aahjl Dolžina struženja 6000 mm Moč vretena 100 kW Pinola Ø 280 mm Hod pinole 200 mm Teža obdelovanca 40000 kg Poraba 125 A Hitrost vrtenja 250 obr/min Dimenzije (ocenjene): Dolžina 9550 mm Širina 2950 mm Višina 2875 mm Teža 41000 kg Prosimo, upoštevajte: Podatki na tej strani so bili pripravljeni po naših najboljših močeh in, kjer je bilo mogoče, pridobljeni od proizvajalca. Podatki so podani v dobri veri, vendar njihova točnost ni zagotovljena. Posledično ne predstavljajo ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: pripravljen za uporabo (rabljen), WEILER Matador VS 2, vključno z novo digitalno prikazovalno ploščo s tremi osmi. Fedpfozr Rnysx Aahspl Oprema iz šolske delavnice. - Največja višina vretena: 140 mm - Največja razdalja med vreteni: 500 mm - Območje vrtljajev vretena: 15 - 3550 vrt/min - Samodejni vzdolžni in prečni pomiki - Navoji / metrični / palčni itd. - Nova digitalna prikazovalna plošča s tremi osmi - Električni zaščitni pokrov vretena - Delovna luč - Osnovni nosilec Multifix z vložki - Sistem za hlajenje - Tričeljustna glava / stožčasta glava - Podpora vretena MK 3 - Različno orodje - Dokumentacija Dimenzije: D x Š x V 1,5 x 0,6 x 1,5 metra / Teža: 680 kg Pridržana pravica do sprememb in napak.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from Heidenhain ND 780, from a training workshop!! Fodpfxsy T Hqcs Aahepl Technical specifications: - Machine No.: 7702, Year of manufacture: approx. 1990 - Centre height: 140 mm - Centre distance: 500 mm - Spindle speed: 15 – 3550 rpm - Spindle bore: 36 mm - Short taper spindle nose DIN 55022-5 with bayonet lock - Tailstock: Morse taper 3 - Feed rates: 0.012 to 0.9 mm/rev - Thread types: Metric, Inch, Module, and Diametral Pitch - Metric pitch range: 0.25 to 12 mm - Brake motor - Weight: approx. 700 kg - Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: - 3-axis digital readout Heidenhain ND 780 - Quick-clamping system for internal and external collets (see photo) - 1 piece three-jaw chuck, 3 sets of jaws - Multifix size A with 3 tool holders - Spindle guard - 1 piece bed stop - Change gears - Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. Naturally, the machine is fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of this Weiler was a training workshop. The machine comes equipped with comprehensive accessories. Take the opportunity to inspect the machine under power on site and see its very good condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop Fpjdpowrm Dtjfx Aahol >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by Elesta from Training Workshop!! Technical Data: >> Machine No. 88-8115, Year of manufacture: 1988 Fedpfx Aajy Tmkvehjpl >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by Elesta >> Quick-clamping device for internal and external collets (see photo) >> 1 pc. 3-jaw chuck, 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler runs smoothly even at high speeds. The original location was a training workshop. The lathe is equipped with extensive accessories. You are welcome to inspect and test the machine under power on site to convince yourself of its excellent condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Leadscrew and Feedshaft Lathe with New K&C 3-Axis Digital Readout, Special Light Grey Finish!!! Technical Data: >> Machine No. 92-027, Year of manufacture 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Speed range: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock Morse taper MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> New 3-axis K&C digital readout, 12-month manufacturer's warranty, supplied with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction toggle >> 1 x 3-jaw chuck, 1 set of jaws >> 1 x 4-jaw chuck, 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The lathe is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis K&C digital readout has been retrofitted. All scales are brand new and equipped with protective covers against dirt. All slides move smoothly and evenly. Take the opportunity to view and test the machine under power on site to verify its condition for yourself. Fjdpfxoyylq Us Aahspl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Premer struženja 410/440 mm Dolžina struženja 950 mm Krmiljenje Siemens / Weiler D2 Največja teža obdelovanca 900 kg Vretenasta glava Gr 6 MK 6 Premer vretenine 54 mm Prečni pomik 230 mm Premer pinole MK 4 mm Hod pinole 120 mm Višina konice 200 mm Največji navojni korak v mm 0,1 - 250 mm Fjdpfxeyrh Apo Aahjpl Vretenaste hitrosti - brezstopenjske 1 - 3000 min⁻¹ Skupna potrebna moč 12 kW Teža stroja pribl. 2,1 t Prostorska potreba pribl. 2,3 x 1,5 x 1,8 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feedscrew Lathe with Brand New K&C 3-Axis Digital Readout in Special Light Grey Paint Finish!!! Technical Data: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds: 0.012 to 0.9 mm/rev >> Thread Cutting Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitch: 0.25 to 12 mm >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> K&C 3-Axis Digital Readout – Brand New, 12 months manufacturer's warranty; user manual included Functions: Metric/inch switch, coordinate selection ABS/INC, value halving function, reference mark setting, tool memory for 200 tools, taper calculation, radius/diameter mode, quick zeroing, count direction toggle >> 1 Three-jaw chuck, 1 set of jaws >> 1 Four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A quick-change tool post with 2 holders >> Motor brake >> Bed stop About the Machine: Fpodpeyylqhofx Aahsl For sale is a Weiler Matador VS-2 in excellent condition. The machine is, of course, fully operational and has been newly repainted in light grey. This lathe is in very good condition. The K&C 3-axis digital readout has been retrofitted. All scales are brand new and fitted with protective covers to safeguard them against dirt. All slides move smoothly and uniformly. Take the opportunity to view the machine under power onsite and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C NEW in Special Light Grey Paint! Technical Data: >> Machine No.: 92-028, Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Fedpeyyb T Sofx Aahepl Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of count switching, >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is of course fully functional and has been newly painted in light grey. A very fine machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and fitted with cover strips to protect them from dirt. All slides move smoothly and evenly. Take the opportunity to view the machine under power on site and convince yourself of its condition.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Table clamping surface: 765 x 400 mm Travel paths x/y/z: 650/410/510 mm Spindle taper: BT 40 Min./max. distance table/spindle: approx. 90/690 mm Spindle speeds: 80 - 8,000 rpm Number of tool stations: 20 units Feed rate: approx. 30 m/min Rapid traverse: approx. 30 m/min Electrical connection: 380 V, approx. 15 kVA Fodpfotwy Dijx Aahopl Required space: 2,300 x 2,100 x 2,650 mm Weight: 4,000 kg