Vlečno vozilo

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 9.000 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Safety long-distance cab FH • Cab auxiliary heater, 2 kW • 33 l fridge with freezer compartment, under the bunk • Air suspension on front axle(s) • Transmission / I-Shift operation via driver's seat control module • I-Shift driving modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking • Lane keeping assist • Side collision avoidance and turn assist (both sides) • Driver alert system, warns against drowsiness * VEB Volvo Engine Brake * etc. WIESE superstructure for aerial work platform and construction machinery transport with hydraulic access ramps • With 2 pairs of wheel recesses incl. wheel recess covers Superstructure dimensions: - Length approx. 9,050 mm usable length Crjdpfx Agow Itmlstjh - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Robust, weight-optimized steel welded construction, box body design - Short cross member spacing for high point loads - Rear end chamfered for low ramp angle - Outer frame profile 90° - Front wall in reinforced design - Storage box built in at bottom front, ahead of bulkhead - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet toolboxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal members each with Multi-X profile along the entire length with numerous lashing points (2.5 t) - 4 lashing eyes, 8 t, recessed into the rear (left/right/middle/middle) - 4 lashing eyes, 8 t, recessed in front of the bulkhead (left/right/middle/middle) - Outer frame profile 90° Access ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 individual/slide ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp as well as a crossing ramp for warehouse equipment (sliding part remains closed); the fixed ramp section is placed onto the warehouse ramp - Stable tension bar for securing during transport (alternative with strap tension) - 2 hydraulic rear supports with plate, warning sound and indicator light in cab - Operation of ramp and supports via electro-hydraulic system - Controlled by radio remote control and emergency controls at the control block - Control block mounted in side-mounted stainless steel toolbox - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handholds left and right for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side covering according to example pictures (green vehicle) - Body coating KTL - Tow hitch with ball head at rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted on the front wall at the top - 4 exterior LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle comes with cab in white and body in nova grey (external frame painting in RAL color of your choice possible) Further

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 9.000 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-Axle Volvo Machine Transporter / Aerial Work Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver’s cab FH - Cab parking heater, 2 kW - 33 l cool box with freezer compartment located under bunk - Air suspension on front axle(s) - Transmission / I-Shift operation via control unit at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco-Cruise-Control (cruise control) including brake cruise control - Manual shifting possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assistant - Side collision avoidance and turn assist (both sides) - Driver alert system (fatigue warning) - VEB Volvo Engine Brake Crsdpfx Agjw Itl Uoteh - etc. WIESE Body for aerial platform and construction machine transport with hydraulic loading ramps With 2 pairs of wheel wells incl. wheel well covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, volume design - Short crossmember spacing for high point loads - Rear end angled for a low approach angle - Outer frame profile 90° - Front wall reinforced version - Storage box inside, below front wall - Grating floor - 5,000 daN wheel load capability - Above axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lash rings, 8 to., recessed in outer frame - Longitudinal beams each with Multi-X contour over full length, numerous lashing points 2.5 to. - 4 lashing eyes 8 to recessed at rear (left/right/center/center) - 4 lashing eyes 8 to recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 single/stretch ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse use (stretch part remains closed), fixed part laid onto dock ramp - Sturdy tension bar for transport safety (alternative with strap tension) - 2 hydraulic rear supports with footplates, warning sound and warning light in cab - Electric-hydraulic drive for ramps and supports - Operated via radio remote control and emergency control on valve block - Valve block mounted in stainless steel storage box on frame side - Superwinch 8.2 to. with approx. 20 m steel cable - Access with grab handle right and left for cargo area access - 5 stainless steel storage boxes in drawer design, incl. lighting - Side cladding as on sample images (green vehicle) - KTL coating on body - Rear tow coupling, ball head, 3.3 to. - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 LED work lights on frame exterior for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear Stock vehicle with cab in white, body in nova grey (custom RAL color for outer frame available on request) Further information upon request.