Tovornjak za prevoz avtomobilov

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 32.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine and access platform transporter ? FH 500 8x2R ? Rear trailing axle, electro-hydraulically steered, single tires ? Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ? FH safety long-distance driver’s cab ? Cab parking heater, 2 kW ? 33 l cool box with freezer compartment, under bunk ? Air suspension on front axle(s) ? Gearbox / I-Shift operation via control unit on driver’s seat ? I-Shift drive modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic information ? Eco cruise control (cruise control), including brake cruise control ? Manual shifting available in automatic mode (incl. kickdown) Adaptive traction control ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assist Dcjdjw Itmrjpfx Adhen ? Side collision avoidance and turn assist (both sides) ? Driver alert system, warns against fatigue * VEB Volvo Engine Brake * etc. WIESE body for access platform and construction equipment transport with hydraulic loading ramps With 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Approx. 9,050 mm usable length - Outer width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized steel welded construction, box-section design - Short crossmember spacing for high point loads - Rear end bevelled for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN wheel load - Above axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t recessed at rear (left/right/middle/middle) - 4 lashing eyes 8 t recessed in front of bulkhead (left/right/middle/middle) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable ramps, each ramp can be shifted laterally - Ramps can be used as loading ramps as well as drive-over bridges for warehouse technology (extendable part stays closed); fixed ramp section is laid on the loading dock - Sturdy tension bar as transport lock (optionally with strap tension) - 2 hydraulic rear supports with plates, warning buzzer and indicator light in cab - Ramp and supports operated electro-hydraulically - Control via radio remote and emergency operation on control block - Control block mounted in stainless steel toolbox on side of chassis - Superwinch 8.2 t with approx. 20 m steel cable - Access with handles right and left for load area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side cladding see sample pictures (green vehicle) - Body coating KTL - Trailer coupling ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high on front bulkhead - 4 external LED work lights on the frame for area lighting - 2 LED work lights at rear - 1 rotating beacon at rear, removable The stock vehicle has a white cab and body in nova grey (outside frame painting in RAL color of choice available) For more information, please refer to the product details/information.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 9.000 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-Axle Volvo Machine Transporter / Aerial Work Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver’s cab FH - Cab parking heater, 2 kW - 33 l cool box with freezer compartment located under bunk - Air suspension on front axle(s) - Transmission / I-Shift operation via control unit at driver’s seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco-Cruise-Control (cruise control) including brake cruise control - Manual shifting possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assistant - Side collision avoidance and turn assist (both sides) - Driver alert system (fatigue warning) - VEB Volvo Engine Brake - etc. WIESE Body for aerial platform and construction machine transport with hydraulic loading ramps With 2 pairs of wheel wells incl. wheel well covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height (top of floor) approx. 1,050 mm unloaded - Robust, weight-optimized steel welded construction, volume design - Short crossmember spacing for high point loads - Rear end angled for a low approach angle - Outer frame profile 90° - Front wall reinforced version - Storage box inside, below front wall - Grating floor - 5,000 daN wheel load capability - Above axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lash rings, 8 to., recessed in outer frame - Longitudinal beams each with Multi-X contour over full length, numerous lashing points 2.5 to. - 4 lashing eyes 8 to recessed at rear (left/right/center/center) - 4 lashing eyes 8 to recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramp design as 2 single/stretch ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp or as a drive-over ramp for warehouse use (stretch part remains closed), fixed part laid onto dock ramp - Sturdy tension bar for transport safety (alternative with strap tension) - 2 hydraulic rear supports with footplates, warning sound and warning light in cab - Electric-hydraulic drive for ramps and supports - Operated via radio remote control and emergency control on valve block - Valve block mounted in stainless steel storage box on frame side - Superwinch 8.2 to. with approx. 20 m steel cable - Access with grab handle right and left for cargo area access - 5 stainless steel storage boxes in drawer design, incl. lighting - Side cladding as on sample images (green vehicle) - KTL coating on body - Rear tow coupling, ball head, 3.3 to. - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 LED work lights on frame exterior for area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear Dcjdpfxow Itl Uj Adhon Stock vehicle with cab in white, body in nova grey (custom RAL color for outer frame available on request) Further information upon request.