Tovornjak s ploščadjo

VOLVO Arbeitsbühnen Baumaschinentransporter mit Rampen

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 3 osi, skupna masa: 32.000 kg, dolžina tovornega prostora: 9.000 mm, širina tovornega prostora: 2.550 mm, emisijski razred: Euro 6, barva: bela, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine and access platform transporter ? FH 500 8x2R ? Rear trailing axle, electro-hydraulically steered, single tires ? Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle ? FH safety long-distance driver’s cab ? Cab parking heater, 2 kW ? 33 l cool box with freezer compartment, under bunk ? Air suspension on front axle(s) ? Gearbox / I-Shift operation via control unit on driver’s seat ? I-Shift drive modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic information ? Eco cruise control (cruise control), including brake cruise control ? Manual shifting available in automatic mode (incl. kickdown) Adaptive traction control ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assist ? Side collision avoidance and turn assist (both sides) ? Driver alert system, warns against fatigue * VEB Volvo Engine Brake * etc. WIESE body for access platform and construction equipment transport with hydraulic loading ramps Dwsdpfow Itmrsx Ag Noc With 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Approx. 9,050 mm usable length - Outer width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized steel welded construction, box-section design - Short crossmember spacing for high point loads - Rear end bevelled for low ramp angle - Outer frame profile 90° - Bulkhead in reinforced design - Storage box inside at bottom in front of bulkhead - Grating floor - Designed for 5,000 daN wheel load - Above axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed in outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 t lashing points - 4 lashing eyes 8 t recessed at rear (left/right/middle/middle) - 4 lashing eyes 8 t recessed in front of bulkhead (left/right/middle/middle) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable ramps, each ramp can be shifted laterally - Ramps can be used as loading ramps as well as drive-over bridges for warehouse technology (extendable part stays closed); fixed ramp section is laid on the loading dock - Sturdy tension bar as transport lock (optionally with strap tension) - 2 hydraulic rear supports with plates, warning buzzer and indicator light in cab - Ramp and supports operated electro-hydraulically - Control via radio remote and emergency operation on control block - Control block mounted in stainless steel toolbox on side of chassis - Superwinch 8.2 t with approx. 20 m steel cable - Access with handles right and left for load area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side cladding see sample pictures (green vehicle) - Body coating KTL - Trailer coupling ball head at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high on front bulkhead - 4 external LED work lights on the frame for area lighting - 2 LED work lights at rear - 1 rotating beacon at rear, removable The stock vehicle has a white cab and body in nova grey (outside frame painting in RAL color of choice available) For more information, please refer to the product details/information.

Stanje: novo, prevoženi kilometri: 100 km, moč: 375 kW (509,86 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.550 mm, dolžina tovornega prostora: 9.000 mm, Leto izdelave: 2025, Oprema: ABS, klimatska naprava, navigacijski sistem, parkirni grelec, 4-axle Volvo machine transporter / aerial work platform transporter • FH 500 8x2R • Trailing axle, electro-hydraulically steered, single tires • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Safety long-distance cab FH • Cab auxiliary heater, 2 kW • 33 l fridge with freezer compartment, under the bunk • Air suspension on front axle(s) • Transmission / I-Shift operation via driver's seat control module • I-Shift driving modes: Standard, Performance, and Economy • I-See with map-based topography and traffic information • Eco cruise control (cruise control), including brake cruise control • Manual shifting possible in automatic mode (incl. kickdown), adaptive traction control • Adaptive cruise control (ACC) with collision warning and emergency braking • Lane keeping assist • Side collision avoidance and turn assist (both sides) • Driver alert system, warns against drowsiness * VEB Volvo Engine Brake * etc. WIESE superstructure for aerial work platform and construction machinery transport with hydraulic access ramps • With 2 pairs of wheel recesses incl. wheel recess covers Superstructure dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen Dsdpew Itmlefx Ag Newc - Robust, weight-optimized steel welded construction, box body design - Short cross member spacing for high point loads - Rear end chamfered for low ramp angle - Outer frame profile 90° - Front wall in reinforced design - Storage box built in at bottom front, ahead of bulkhead - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet toolboxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal members each with Multi-X profile along the entire length with numerous lashing points (2.5 t) - 4 lashing eyes, 8 t, recessed into the rear (left/right/middle/middle) - 4 lashing eyes, 8 t, recessed in front of the bulkhead (left/right/middle/middle) - Outer frame profile 90° Access ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps designed as 2 individual/slide ramps, both ramps laterally adjustable - Ramp can be used as a loading ramp as well as a crossing ramp for warehouse equipment (sliding part remains closed); the fixed ramp section is placed onto the warehouse ramp - Stable tension bar for securing during transport (alternative with strap tension) - 2 hydraulic rear supports with plate, warning sound and indicator light in cab - Operation of ramp and supports via electro-hydraulic system - Controlled by radio remote control and emergency controls at the control block - Control block mounted in side-mounted stainless steel toolbox - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handholds left and right for loading area access - 5 stainless steel toolboxes in drawer design, incl. lighting - Side covering according to example pictures (green vehicle) - Body coating KTL - Tow hitch with ball head at rear, 3.3 t - 4 LED work lights - 2 LED tail lights mounted on the front wall at the top - 4 exterior LED work lights on frame for area lighting - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle comes with cab in white and body in nova grey (external frame painting in RAL color of your choice possible) Further