Stroj za odstranjevanje robov iz pločevine

VG Machines Edge Master

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Gsded Ev Upepfx Agwjip Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Gsdponah Taefx Agwjip Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Leto izdelave: 1998, stanje: skoraj kot novo (rabljeno), Type of Laser: Q-switched pulsed solid-state laser Laser Medium: Nd:YAG Wavelength: 1064 nm Beam Diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam Divergence: 5 mrad multimode, 2 mrad TEM00 Giedpfxod Dhw Ne Agwsp Pulse Duration (Time): CW / 90 ns Max. Output Power: 65 W (130 W optional) multimode, 16 W single mode Pulse Energy: 16 mJ (30 mJ optional) at 3 kHz Operating Modes: CW, Q-switched from 0.1 to 100 kHz Beam Deflection System: Galvanometer system Line Width in mixed mode: approx. 0.12 mm

Stanje: dober (rabljeno), Leto izdelave: 1985, Megamat Vertical Carousel Type: 130-225-42 Device No.: 4492 Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Giodevc Hk Njpfx Agwjp Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Compartment load: 100 kg Total load: 4,200 kg Colour: beige/green

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 80 mm, maks. debelina medeninaste pločevine: 80 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 1.550 mm, pomik osi Y: 3.050 mm, pomik po osi Z: 290 mm, teža obdelovanca (maks.): 1.400 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, skupna dolžina: 9.100 mm, skupna širina: 3.120 mm, skupna višina: 2.200 mm, trajanje garancije: 24 meseci, delovno območje: 3.015 mm, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, Brandneue Full-Cover-Faserlaserschneidemaschine | GS-CE/ GS-CE PRO-Serie | 3000–60000 W MACHINE IN STOCK - AVAILABLE This FULLY COVERED FIBER LASER CUTTING MACHINE from the GS-CE series provides maximum safety for metal cutting. Thanks to the full enclosure and the observation window made from protective glass, you can monitor the process and avoid hazards such as laser radiation, sparks, etc. It also features an exchangeable table with rapid changeover—table can be swapped within 10 seconds. It is the ideal solution for safe and efficient metal cutting! Working area sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm; Laser power: 6 kW - 80 kW CNC controller: FSCUT Max. acceleration: 4G BOCI cutting head Intelligent anti-collision function Automatic lubrication Schneider relay Laser fault alarm Gisdpfx Aoub Nwdsgwjp Cooling system fault alarm Laser safety glass Water chiller TÜV CE certificate Optional: automatic loading and unloading system The control unit supports graphic formats: AI, BMP, Dst, Dwg, DXF, DXP External programming System is delivered complete including chiller, extraction unit, and safety light barriers Demo machine - as new condition

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Gijdpfx Agehigmbowep Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation Gjdpfjgg Nv Iox Agwoip - 400V

Stanje: dober (rabljeno), Kljukasta stroj za peskanje, 250 kg TOSCA TS-250 Tip: Kljukasta Največji premer obdelovanca: 1000 mm Največja višina obdelovanca: 1500 mm Največja teža obdelovanca: 500 kg Širina odprtine stroja: mm Število turbin: 2 Tip turbine: 360 Premer kolesa turbine: 360 mm Moč turbine: 7,5 kW Maksimalni pretok turbine: 105 kg/min Tip transportne tirnice: Y Tip čistilca: zračno čiščenje Temelj: ne potrebuje Zaščita ohišja: Mn + guma Potreben pretok zraka: 3.000 m³/h Največja instalirana moč: pribl. 19 kW Skupna teža stroja: 0 kg Skupna širina stroja: mm Gisdpfxovpgq Nj Agwep Skupna višina stroja: mm Skupna dolžina stroja: mm Stroj je v postopku celovite obnove. Vsi poškodovani deli bodo zamenjani z novimi, turbine popolnoma obnovljene. Novo barvanje v odtenku RAL 7037/2000. Stroj bo dostavljen v stanju PRIMERLJIVEM Z NOVIM! !!! STANJE KOT NOVO !!!

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Gisdpfjd Ixadsx Agwsp Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.274 h, število osi: 6, stiskalna sila: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electrohydraulic upper drive, and 2D graphic control DA 69 on a 10.4" colour display. The machine is equipped with a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending operations. Regularly serviced as part of a TRUMPF maintenance contract. Contact us for further details on this machine. • Free column gap: 3680 mm Giedpfox D D Hyox Agwjp • Installation height: 535 mm • Control: 2D graphic control DA 69 on window with 10.4” colour screen • Electrical equipment: for 400 V / 50 Hz three-phase current • The machine has undergone annual maintenance • Maintenance contract in place • Rigid machine frame, welded all-steel construction • Press beam with high bending resistance • High-dynamic direct electromechanical drive (torque motor) • Electrohydraulic upper drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3 axes (X1, R1, Z1) and 6-axis options • Rack-and-pinion drive for X and R axes • Safe, front-accessible movement of backgauge fingers • Upper tool holder system Modufix, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Integrated operating system Windows XPe, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network capable, teleservice via modem • Control cabinet air conditioning • Side-mounted safety doors and rear safety cover • 2-button foot switch for standing or seated operation • LED lighting in rear work area • LED lighting in front work area • Ergonomics package: comfortable front work surface and footrest • 2 storage consoles and 2 document compartments • 24,000 operating hours, brakes renewed in 2024 • TRUMPF tools maintained, all within tolerance Additional equipment • Backgauge system with 5 axes and control cabinet cooling • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC crowning • BendGuard safety device • Foot switch • 2x front support consoles • 1x bending aid with 900 mm park position • Table extension for base table / auxiliary table Technical Specification Bending length: 1020 mm