Vg Machines Edge Master nakup rabljenega (67.585)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.060 mm, najv. debelina pločevine: 150 mm, skupna dolžina: 2.640 mm, skupna širina: 1.905 mm, skupna višina: 2.090 mm, skupna masa: 3.200 kg, širina mize: 1.060 mm, višina obdelovanca (maks.): 150 mm, moč: 25,2 kW (34,26 KM), vhodni tok: 52 A, Cenovno ugoden osnovni model, a vseeno opremljen z vsemi potrebnimi funkcionalnostmi. S širino delovne površine do 1060 mm stroj v enem prehodu združuje odstranjevanje igel, zaobljevanje robov in odstranjevanje laserskega oksida. • Širina mize 1060 mm • Največja višina obdelovanca 150 mm • Odstranjevanje igel in zaobljanje v enem prehodu • Brusni trak • 2 x 2 zgornje ščetke • Pritisni valji pred in za vsakim agregatom Uporabniku prijazno upravljanje prek zaslona na dotik. Fodpfx Aoy Icrrepljpg Razstavni stroj!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 150 mm, hitrost pomika os X: 6 m/min, najv. debelina pločevine: 200 mm, delovna višina: 200 mm, Long sheet parts up to 150 mm wide, box sections, rectangular tubes and flat bars. Deburring, edge rounding and fine finishing. Fpodpfx Ajy D Nh Espleg Sanding belt unit (K) TopBrush unit (2TB) Working width: 150 mm Ex-showroom machine!

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Fsdpfx Ajr A Eq Roplspg Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Fodpohy Tlrofx Aplspg Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Fpodpfx Apec S Di Releg Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) Fpsdol D Rp Espfx Apljg F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Fedjlc Ewiepfx Aplopg Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Fpedewiwnqepfx Aplog Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, max. edgebanding thickness 0.2 - 15 mm Feed speed 12/18 m/min Heating-up time approx. 6 min Automatic magazine (strip magazine) Roll magazine Machine converted for ABS edges Quick heat-up granulate glue pot End trimming shear: 0.2 - 3.0 mm Fodpfx Aofbr S Roplopg Flush milling unit Radius milling unit Operation via selector switch / pushbuttons Extendable roller support table Acoustic enclosure Machine length 3800 mm Used Machinery Information: • Technical data subject to errors and prior sale. • Stated prices are ex-location, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are purchased as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines at the site. • Special agreements are only valid in written form. (We only respond to enquiries that include your full address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating mode: hot/cold process, one-sided left Edging thickness: 0.4 - 8 mm Edging height: max. 51 mm Workpiece dimensions: - Width min. 50 mm - Length min. 180 mm - Thickness min. 6 mm Feed speed: approx. 11 m/min Glue application via slot nozzle End trimming Flush trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Machine length: 3750 mm Fpedpfx Aebahd Ejpleg

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Fpsdpfxeuxqzus Aplsg Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm Fodpfx Ajtt Da Dsplepg CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Fpjdec Tmygopfx Aplog Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Robilni stroj Brandt (skupina Homag) za robni trak v roli in ABS. Popolnoma opremljen z vhodnimi rektifikacijami in vsemi profilirnimi skupinami z zaoblitvijo. Popolnoma delujoč. Fpodpfx Apey N Ukijleg

Stanje: novo, Edge and Contour Milling Machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with clamping nut - Operating manual Fodpfxjbhfzbo Aplopg

Stanje: novo, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap grinding wheel K80-ST Fpodpfx Ajdurxnoplsg - Extraction nozzle - Operating manual

Stanje: novo, Deburring machine Make: Assfalg Fodpsb E Dc Hsfx Aplopg Model: FS 5 Condition: New machine Speed: 2,800 rpm Max. chamfer width: 3 mm Standard equipment includes: - Guide rail 400 x 50 x 10 mm - Cutter head without indexable inserts - Chip drawer - Operating manual

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Fedpfowlbxlsx Aplopg Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, Leto izdelave: 2005, Used machine Year of manufacture: 2005 Features and Technical Data: - Base machine 555 Fedpfjx Enpqox Aplspg - Processing dimensions for edge milling: - X = 3514 mm - Y = 1544 mm - Maximum processing dimensions: - X = 3868 mm - Y = 1746 mm - Z = 325 mm - Workpiece support with 8 consoles, pneumatically clamped - Drilling unit 7968: - 18 vertical drilling spindles with 32 mm pitch - 12 in X-axis and 6 in Y-axis - individually selectable - T-shape arrangement - max. drilling diameter 35 mm (depending on panel thickness) - spindle stroke: 70 mm - rotation direction: alternating clockwise/counterclockwise - speed: 4725 rpm, infinitely variable - 2 horizontal drilling units in X-direction, 1 horizontal drilling unit in Y-direction - Saw unit 7946: - Motor: 3.5 kW - 90° pneumatic swivel - speed: 5300 rpm - Tool holder A Ø = 200 mm, I Ø = 30 mm, B = max. 3.5 mm - sawing/grooving in X and Y directions - Milling unit 7935: - with 6 kW spindle, water-cooled - Milling unit 7982: - for mortise lock case milling - Tool changer 7996: - 18-position magazine (carousel) - Vacuum pump with 140 m³/h - Hand-held control device - PC control with TwinCAM WOP system - Siemens control Availability: short-term Storage location: 63934 Röllbach

Stanje: novo, Leto izdelave: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edging: 0.4 - 3 mm Solid wood edging: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: granulate / quick-change glue pot kit End trimming unit: yes Flush end trimming unit: yes Corner copying unit: yes Flush radius milling unit: yes Fpedol D Rx Uopfx Aplog Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3774 mm Machine width: 1546 mm Machine height: 1337 mm Weight: 842 kg

Stanje: rabljeno, Leto izdelave: 2016, Industrial Automatic Edge Banding Machine SOLUTION XD MAIN FEATURES "E TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: OPERATE THE MACHINE WITH JUST ONE "TOUCH" STANDARD PRESSURE UNIT WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES, AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand configuration for processing roll material and strip edges using all conventional hot-melt adhesives. The base frame consists of a robust welded steel stand with increased rigidity, providing optimal support for the processing units. The top pressure ensures a stable hold with a thick-walled steel profile and dual trapezoidal drive belt, which is automatically positioned according to panel thickness. Height adjustment with indicator at the top pressure and on the operator surface. Fjdpfx Apjxy Tm Islspg Manual workpiece infeed system with large-scale work line and enlarged support area facilitates the insertion of large workpieces. Adjustable infeed fence with two positions and automatic selection for processing with or without pre-milling. Working units attached to the pressure beam and mechanically linked to ensure automatic setting when changing panel thickness. Lower working units attached to the machine frame or longitudinal beam for precise reference to the panel. All high-frequency motors are equipped with frequency inverters for optimal flexibility and improved production times; each unit is equipped with its own inverter. Extraction hood for all units positioned after the gluing station. Polycarbonate viewing windows provide a clear view of the units during processing. Interior lighting with sound-absorbing material for reduced noise emissions. Spacer at the infeed fence allows material to be fed into the machine at the correct distance. The distance adjusts automatically to the selected feed speed. Swiveling control panel, positioned at the infeed, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal enclosure mounted on the machine frame, equipped with doors for convenient access during maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide rubberized nylon chain plates for optimal guidance and high precision. The chain runs on two guides made of hardened and ground steel – one round and one flat – to ensure straight feeding and prevent lateral displacement. Automatic lubrication of the chain; the control system adjusts the amount of oil according to the number of processed panels. External roller conveyor positioned along the entire machine length; equipped with a retractable system extendable up to 650 mm (for panels up to 1200 mm maximum width). E-TOUCH PC control system enables fast and easy execution of main functions, including: – Processing of programs in "Just in Time" mode – Possibility of management via parts lists – Management options through ...

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, automatic edge banding machine model BIESSE AKRON 245 Used machine CE-compliant: Yes including operating manuals for edge processing of wood, PVC, veneer, melamine, ABS for furniture, furnishings, kitchens, bathrooms, doors, panels and more NC 321 electronic positioning unit Technical specifications: Min. panel height to be glued: 10 mm Max. panel height to be glued: 45 mm Min. edge tape thickness (coil): 0.4 mm Max. edge tape thickness (coil): 3 mm Max. solid wood edging thickness: 8 mm Min. panel width: 50 mm Min. panel length: 150 mm Feed speed motor power: 2 HP Electric pressure beam lift Telescopic support for large panels Soundproof enclosure Fpjdpfxsgipk Ao Apleg Configuration: Gluing unit with glue pot Pressure rollers Edge feed unit End trimming unit for vertical cutting of excess edging front and rear (2 motors) Top/bottom trimming unit to trim the upper and lower surplus edge (2 motors) Tilting top/bottom trimming unit for final upper and lower trimming of surplus edge (2 motors) Glue scraper unit for removing glue residues Overlapping buffing unit for brushing and polishing the applied edges (2 tiltable motors) Compressed air: 7–8 bar Weight: 1700 kg

Stanje: rabljeno, Lokacija skladišča: Sonnefeld Fsdpfx Aeway Dcepljpg

Stanje: rabljeno, Leto izdelave: 1996, Debelina roba: 0,4 - 12 mm Rob valja: 3 x 45 mm oz. 0,8 - 60 mm Minimalna širina obdelovanca: 65 mm Minimalna dolžina obdelovanca: 160 mm Debelina obdelovanca: 10 - 55 mm Podajanje: 13 m/min Predrezkanje (spajanje) Lepilna kad Quickmelt Lepilni del Obarjanje Poravnalno rezkanje Poševno rezkanje Polmerno rezkanje Kopiranje robov Ravno strgalo Polirni agregat Dimenzije stroja: 7450 x 1220 x 2400 mm Teža: 3000 kg Lokacija skladišča: Nattheim Fpsdpfx Aovvkd Tepljg

Stanje: rabljeno, Leto izdelave: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speeds: Infinitely variable feed from 12–30 m/min (depending on equipment) Features: - Adjustable infeed table in magazine area (max. adjustment range 30 mm) - Height-adjustable magazine plate for lower edge overhang adjustment - Large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm - Transport chain including automatic central lubrication - Motorized, position-controlled bridge height adjustment - Pneumatic locking roller for processing shortest workpiece intervals - Extendable workpiece support (extension up to 1600 mm) - Space-saving, pneumatically controlled sliding hoods over the complete machine (deviations possible for certain units) - Motorized infeed fence - Lubrication injector for all joints and pins (including hour counter) - Central extraction connection (2x Ø 200 mm) - Integrated chip collection box at machine end (in conjunction with radius scraper unit) Control PPC 231 - Power PC for efficient setup and changeover - 15" SVGA touchscreen display - CF memory card 128 MB - On-board USB port - Ethernet network interface - On-board keyboard connector - Windows-like user interface - Plain text and/or graphic information - Rotatable, tiltable control panel at eye level - Dust-proof membrane keypad with softkeys (push buttons) - LED indicator for unit preselection - Program list with program names and numbers - Comprehensive program memory - Individual unit selection with basic settings for setpoints, positions and tool corrections as well as fixed position points - Setup processes for units and axis adjustments centrally and clearly via fine adjustment (depending on equipment) - Interval display for shortest workpiece distance Fjdpfx Apsvvkfdelopg - Integrated distance control; positions controlled globally and/or program-specific - Comprehensive and complete operating data acquisition - Service messages in plain text - Diagnostic system - Integrated synchro-bus system for high-precision unit control - Individual management for up to ten users including password protection - Online maintenance (optional), data exchange with HOLZ-HER service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 - belt bridge Options and accessories for the base machine: Spray unit 1856 for entry and exit section: For infeed: Electronically controlled parting agent spray unit with Riepe-LPZ/II parting agent For outfeed: Electronically controlled cleaning agent spray unit with Riepe-LP163/93 cleaning agent (only in conjunction with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) With two electronically controlled cutter units - 1 unit counter-rotation - 1 unit co-rotation - 5 mm plunge depth - Static frequency inverter 200 Hz - Without router tool - With ProLock quick-change tool holder Tooling for 1803 (workpiece height up to 60 mm) Diamond cutters PRO UT, 2 pcs (front and rear), incl. protect. hoods Ø 100–63, Ø 30 mm, Z = 3 + 3 + 3, 1 left-hand, 1 right-hand Noise-reduced cutters with integrated chip guidance DFC technology (Leitz system) Max. chip removal: 2 mm at 60 mm workpiece height [Text continues] If you need the rest of the translation or a tailored summary, please let me know.