CNC stružnica

VDF-BOEHRINGER DUS 1000 ti

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Fanuc 21iTB control 16-position BT50 tool changer Worktables: 1600 mm diameter, maximum rotation speed 250 rpm, maximum load capacity 8,000 kg Maximum workpiece diameter: 2,000 mm; maximum machining height: 1,250 mm Cross slide: 250 x 250 mm; Z-axis travel: 900 mm Pjdpfswzyndox Agpjrd Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Schiess 80 DF Type: 80 DF 700/900-550/280 Originele CNC-machine van Schiess (geen omgebouwde conventionele machine) Volledig hydrostatisch systeem Gelaste kolomconstructie Siemens-aandrijfmotor Uitgerust met een inspectielift om het werkstuk van bovenaf te bekijken Machine met zeer hoge maatvastheid/tolerantie Tafeldiameter: 7.000 mm Maximale werkstukdiameter: 9.000 mm Maximale tafelbelasting: 315 ton Toerentalbereik: 0,25 – 25 omw/min Maximaal rotatiekoppel: 63.000 kgm Psdpfov Rwdpjx Agpjrd Maximale snijkracht met uitgeschoven ram tot 900 mm: 12.500 kg Gereedschapskop kan van -40° tot +40° zwenken Vermogen: 125 kW Tafelgewicht: 71 ton Ramsectie: 380 x 380 mm Horizontale ramverplaatsing vanaf middelpunt tafel: 5.640 mm Verticale ramverplaatsing: 2.800 mm Maximale hoogte onder de traverse: 5.547 mm Horizontale verplaatsing van de traverse: 4.700 mm Uitgerust met een automatische 3-positie gereedschapswisselaar Totaal gewicht van de machine: 260 ton Unieke eigenschap: de hoofdkolom kan in 3 verschillende posities worden geconfigureerd: 1 - voor maximale zwenkdiameter van 9.000 mm (huidige afstelling) 2 - voor maximale zwenkdiameter van 10.500 mm 3 - voor maximale zwenkdiameter van 13.100 mm Dit wordt bereikt door de hoofdkolom te verplaatsen/herpositioneren op het funderingsframe.

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Pedpfx Ajv A Sqhsgpjrd Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 9.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 1.000 mm, FREZALNI / VRTALNI STROJ S PREMIČNO KOLOMNO CME TEHNIČNE LASTNOSTI CME - MOŽEN OGLED V OBRATOVANJU Znamka: CME Model: MB 9000 Leto: 2007 CNC: Siemens Sinumerik 840D Os X: 9000 mm Os Y (vertikalno): 4000 mm Os Z: 1000 mm Podpju R Rk Hjfx Agperd Os W (Ø 150 mm): 700 mm 2 rotacijsko-translacijski mizi (Linearna pot: 2000 mm) 2500 x 2500 mm, nosilnost 25 t Heidenhain optične letev na vseh oseh Neposredna glava Zamenjava orodja, 90 mest ZF menjalnik Notranje hlajenje Odvzemanje ostružkov

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. Psdpfx Aoulnb Dogpjrd - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: rabljeno, Leto izdelave: 2012, Maximum grinding diameter: 320 mm Grinding length: 1,500 mm Centre height: 160 mm Control: Touch Jones & Shipman Maximum workpiece weight between centres: 100 kg Table: Z-axis travel: 1,645 mm Feed rate: 0.0001 - 12 m/min Swivel range: +5 / -5° X-axis: X-axis travel: 260 mm Feed rate: 0.0001 - 6 m/min Grinding head: Grinding spindle motor: 7.5 kW Cutting speed: 45 m/s Grinding wheel Ø x width x bore: 450 x 50 x 203.2 mm Tailstock: Prjdpstqmrpjfx Agped Swivel range: -15 / +90° Speed range: 0 - 660 rpm Torque: 27 Nm Mount: MT 3 Total power requirement: kW Machine weight: approx. 8.5 t Space required: approx. 5.5 x 2.5 x 2.0 m Cylindrical grinding machine - External JONES & SHIPMAN - Suprema Easy 1500 E - Spare grinding wheel flange - Multi-grain diamond dresser (for peripheral and side dressing, 10 mm, 1 carat) - Tailstock with micrometer adjustment (max. adjustment travel ±0.05 mm) - Pneumatic quill retraction - Two-jaw steady rest (range 8-75 mm)

Stanje: dober (rabljeno), Leto izdelave: 2007, - Siemens 840 D CNC control - Bar capacity: 65 mm - Main and sub spindle with maximum speed of 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Speed of driven tools: 4,000 rpm - Tool holder: VDI 30 with drive according to DIN 5480 TRAVELS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) EQUIPMENT Coolant system Chip conveyor Psdsuw Izvopfx Agpjrd Bar feeder: TOP Automazioni XF 375

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Proizvajalec: Hamba Maschinenfabrik GmbH Tip: 2400 Leto izdelave: neznano, generalno obnovljeno pri Grunwaldu leta 1993 Zmogljivost: do 2.400 lončkov/uro (odvisno od izdelka) Steze: 1-stezna, 12-mestna Polnilni produkt: poltekoči izdelki kot so sveži sir, jogurt, smetana, ayran ipd. Polnilna prostornina: 100 - 500 ml, nastavljivo Format lončka: okrogel, 95 mm Vrsta zapiranja: alu-folija, zatesnitev Predpfxokkglao Agped Priključne vrednosti: 380 V, 50 Hz, 1,7 kW Izstopni trak je vključen Opcijsko: Stroj je mogoče obnoviti

Stanje: dober (rabljeno), Leto izdelave: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Type: Robodrill α-T21iFa Year of manufacture: 2009 Control unit: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse speed (X, Y, Z): 54 m/min Tool magazine: 21 stations Podpfx Agoxflr Hepord Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (list not exhaustive): - CNC Machining Center Fanuc Robodrill α-T21iFa - Rotary indexing table for 4th and 5th axis - Coolant pump and chip tray - Exact scope of delivery according to photo documentation The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an integrated rotary indexing table for 4th and 5th axis machining. This extension enables demanding multi-axis operations and greatly increases production flexibility. With a spindle speed of up to 24,000 rpm and travel ranges of 500 x 400 x 330 mm, the machine provides ideal conditions for precise milling with high productivity. The 21-tool magazine reduces setup times and allows for quick tool changes. Thanks to its robust construction, table load capacity of up to 300 kg, and the powerful Fanuc 31i control, this machine is ideally suited for both series production and complex one-off parts. The integrated coolant unit ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness or timeliness of the information provided.

Stanje: rabljeno, Swing diameter: 3,200 mm Modified swing diameter: 2,400 mm Swing diameter over support: 3,000 mm Max. turning length: 15,000 mm Control system: Sinumerik 840D Siemens Podowtrz Hopfx Agpsrd Max. workpiece weight: 80,000 kg Working accuracy (up to): 0.01 mm Main spindle speed range max.: 50 rpm Approx. machine weight: 154.4 t Required floor space: approx. 20.7 x 6.0 m Heavy-duty lathe ZERBST - DXP 5 / W15x15000 - Measuring accuracy: < 0.01 mm Retrofit 2009 / 2012: - 2009: Conversion of control system to Sinumerik 840D - 2012: New main gearbox including main spindle drive Addition of holding brake, including electrical integration Modification and optimization of cylindrical roller bearing arrangement Modernization of control and safety technology