Preizkusna komora za udarni test –80 °C do +220 °C

Vötsch VT 7012 S2

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Kodpfxjzd Rzke Abxelu Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Kedpfju Egp Isx Abxolu Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Leto izdelave: 2000, obratovalne ure: 104.382 h, stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test evaluates the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature levels under varying load conditions. Through these cyclic stresses and temperature-change-induced accelerated aging, potential weaknesses in the specimen can be identified. - Vertical arrangement of test chambers - Ball screw drive for secure carriage guidance - Carriage load capacity: 50 kg (VT3 7012 S2) - All-around mesh baskets secure the test specimens - High air circulation rate for short temperature change times and even temperature distribution in the test chamber - Warm chamber can be used as a temperature storage unit; cold chamber can be used as a temperature cycling unit - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Rated Voltage: 400 V Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452A Cooling Unit: Water-cooled Shock Cooling (nitrogen cooling) via customer-supplied liquid nitrogen feed External Dimensions: Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions: Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class: Device: IP 42 Control unit: IP20 Switch cabinet: IP 54 Key Parameters for Temperature Tests in Single-Chamber Operation: Temperature Range: Warm chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K (in steady state) Temperature deviation spatially: ±2 K (in steady state within carriage) Warm chamber heating rate: 11 K/min Cold chamber cooling rate: K/min Cold chamber heating rate: 2 K/min Warm chamber cooling rate: K/min Observation window: 355 x 355 mm Cable port: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Kjdpsx Exmtsfx Abxslu Financing through our partner bank is available. komplett-konzept.leasingo.de More articles—new and used—can be found in our shop! International shipping rates upon request!

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-Cooled Two-Chamber Design Ksdpfxowxc I Ue Abxjlu Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change (heating): 11 K/min Cold Chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at center of usable space: ± 1 K Spatial temperature deviation: ± 2 K Rate of temperature change: Heating: 2 K/min Cooling: 3 K/min Test Chamber Volume: 125 liters Temperature Range Hot Chamber: +50°C to +220°C Temperature Range Cold Chamber: -80°C to +70°C Internal Dimensions (W x D x H): 470mm x 650mm x 410mm External Dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port Diameter: ∅ 67mm Power Supply: 3/N/PE AC 400V +10% 50Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: R452-A / R23 Weight: 1000 kg For your security as a buyer, please note the following information: The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna dolžina: 2.700 mm, Ponujam novo napravo za velikofromatne termoplastične rešitve za 3D-tisk. Krmiljenje: Stäubli / Cead – Profinet popolno krmiljenje. Robot: Stäubli TX200L – doseg 2700 mm, nosilnost 100 kg. Ekstruder: Cead E25 s pretokom 12 kg/h. Sušilnik VIZMATEC 100 l z avtomatskim dozirnikom za neprekinjeno proizvodnjo. Za generiranje robotske poti se uporablja G-CODE/NC-koda. Klsdpfx Aourvzrsbxou

Stanje: zelo dobro (rabljeno), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: Kedpfx Absx Hhfhoxjlu The temperature range of the cold chamber is from -74.5°C to +70°C Temperature deviation over time at center of usable space: ±1 K Temperature deviation spatially: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Internal dimensions (W x D x H): 470 mm x 650 mm x 410 mm External dimensions (W x D x H): 930 mm x 2115 mm x 1970+ mm Access port: ∅ 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg For your security as a buyer, please note the following information! The following steps are carried out in advance for our offered chambers: 1. Function test and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and details!) We will be happy to answer further questions by phone.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Kjdpfxorpi E Aj Abxelu

Stanje: dober (rabljeno), Leto izdelave: 2011, Internal flange dimensions: 2340 x 1340 mm Maximum panel size (thickness 20 mm): 2340 x 1240 mm Working chamber height: 60 mm Total pressing force: 300 t Maximum specific working pressure: 5 kg/cm² Press cylinders: No. 6, diameter 140 mm, stroke 250 mm Lower movable platen (upward closing movement) Opening between press platens: 230 mm Loading side: 1400 mm PVC roll unwinder Double loading table Kodotwba Sspfx Abxslu

Stanje: novo, Leto izdelave: 2026, Design your production facility to achieve optimal ergonomics, efficiency, and profitability. Sheet metal from coil saves money, reduces waste, and frees up storage space. Whether your sheet metal workshop is large or small, we have the right solution for you. CIDAN Machinery offers a wide range of products that can be configured into an efficient, custom-tailored production line, where parameters such as output, distance, time, and material accessibility are crucial for fast and cost-effective manufacturing. Kjdomfn Icepfx Abxolu

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, vrtilni razpon: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control • CNC control: Heidenhain iTNC 530 Feed rates Klodpfx Abexgq Aysxeu • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Milling head clamping range: 360 x 1° • Milling head swivel range: 180 x 1° • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Intermittent: 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Coolant system • Tank capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhaul - CNC control upgrades ----- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large component machining - large machining - CNC large-part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine