Pretočni obdelovalni center

Uniteam Covertek IMI

Stanje: rabljeno, Condition: NEW Ljdpfxozhnafe Akhjru with pneumatic clamping device. The universally applicable assembly station for the production of wall, ceiling, and roof elements in timber frame construction. - Heavy-duty base frame construction for a level working surface. - Clamping of elements using 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. Cylinder stroke is 320 mm, clamping force per cylinder approx. 420 kg/4,200 N at 10 bar operating pressure. Clamping can be done in two groups: 5 and 4 pieces, allowing two elements to be clamped/worked simultaneously. - Working surface paneling with wooden boards as far as technically possible. (Optional perforated sheet panel available, as shown in the photo) - Stop system at the bottom with 9 plug-in pins and at the side with 7 plug-in pins for dimensionally accurate elements. - Tilting mechanism for the assembly station using 3 hydraulic cylinders for element weights up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated into the frame area of the assembly station. - The electrical control cabinet is also securely installed beneath the assembly station. - Operation of all functions via control pendant. - Compressed air connection and socket installed at both stationary ends, and on the station’s lengthwise side, 2 sockets and 2 compressed air connections are provided for attaching hand tools. - The stations are built on a modular principle, making it possible to expand with a receiver station, forming a complete turnover station, either immediately or later. A turnover station can be seen in Photo 3. - Additional options: assembly table without tilting function, perforated sheet panels, other working dimensions upon request Working area: - Max. element size (W x H): 12,000 x 3,800 mm - Min. element size (W x H): 1,000 x 100 mm - Clamping cylinder stroke: 320 mm - Stop/plug-in pin height: 120 mm - Working height: approx. 700 mm - Color: RAL 7035 light grey

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, Stroj za sekljanje/drobljenje lesa Vecoplan VHZ 1300, kladniški mlin CPM, ventilator in ciklonski filter JFK. Stroj je v dobrem stanju in je deloval približno 500 ur. Linija je opremljena z vsemi transportnimi trakovi. Lrsdpfx Aoympx Ujkhju

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Stroj za utore za parket Costa Righi mod. Zefiro 2200 Največja razdalja med zunanjimi rezili: 2200 mm Uporabna prehodna širina kosa: 2400 mm Vključujoč vhodni trak in vhodne verige Vključena rezila Lodpox Rrqvefx Akhjru

Stanje: rabljeno, prva registracija: 06/2025, vrsta goriva: bencin, lastna masa: 3 kg, barva: sivo-črna, vrsta prenosa: mehanski, Leto izdelave: 2025, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID, DRIVER'S SIDE OPENING AND PASSENGER SIDE HINGES, REAR OPENING WITH TWO FOLDING DOORS, AND BRAND-NEW FLOOR REF: 25-U-89 TYPE: Bulky waste NEW: No LID: Yes OPENING: Rear with two folding doors DIMENSIONS TOTAL EXTERNAL LENGTH: 5.00 m BOX OUTER WIDTH: 2.50 m INTERNAL / EXTERNAL FRONT WALL: 2.20 m / 2.60 m INTERNAL / EXTERNAL REAR WALL: 2.20 m / 2.60 m INTERNAL / EXTERNAL SIDE WALL: 2.20 m / 2.60 m CAPACITY: 25 m³ WEIGHT: 2,840 kg FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOUR: Green All information is subject to errors and/or omissions. Prices shown exclude VAT. Please contact our sales department for up-to-date pricing and conditions. For further information: Loris: +39 3484773001 Lrsdpfx Akewuwvrjhsu URL: #therolloffspecialists SCARRABILI AURORA Operates in the sale and purchase of industrial and commercial vehicles, with a strong specialization in the waste management sector. Specialists in trucks, trailers, and roll-off equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 bins, containers with and without roll-off cranes. E.&O.E. (Errors and Omissions Excepted) Given the amount of listings and details included, Aurora advises verifying the accuracy of the data with our sales staff.

Stanje: rabljeno, The COVERTEK machining center is suitable for processing solid and laminated timber beams. They are used for the construction of frames and roof structures. * Gantry with mobile positioning carriages; * Machining on 6 sides without rotating the workpiece; * Dual 5-axis machining unit with 12-position HSK-E63 tool holder; * No. 2 spindles, each with 17 kW; * Data imported from CAD/CAM programs Technical Specifications * Workpiece width: min. 100 mm - max. 600 mm; * Workpiece thickness: min. 70 mm - max. 300 mm; * Workpiece length: max. 13,000 mm; * Saw blade diameter: 640 mm; * Feed speed: max. 80 m/min; * Software type: TPA ALBATROS EDICAD; * Central automatic lubrication; * Liquid-cooled spindle; Lrsdpfx Ajtz H Egskhou * CE certification; * Total connected load: 70 kW TECHNICAL DATA MUST BE VERIFIED UPON ARRIVAL OF THE MACHINE AT THE WAREHOUSE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Optimizing Cross-Cut Saw Dimter / Weinig OptiCut 450 Quantum Manufacturer: Dimter / Weinig Lrsdpsyu Urijfx Akhju Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine Description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for fast and precise cross-cutting of wood with yield optimization. The Quantum version is among the most advanced in the OptiCut 450 series, developed for industrial use with very high productivity, precise positioning, and reliable material feed. This machine is suitable for cut-to-length work, defect removal, and production optimization. The OptiCut 450 series is designed for integration with scanners, grading systems, and automated handling equipment. Typical features of the Quantum version include VarioSpeed feed, HighGrip rollers, an independent length measuring system, and servo-controlled waste gate. ([jacks.co.nz][1]) Technical Data: - Capacity: up to approx. 540 cuts/min - Feed speed: approx. 300 – 415 m/min - Maximum workpiece length: approx. 6.3 m - Saw blade diameter: 450 mm - Maximum cutting width: 235 mm - Maximum cutting height: 100 mm - Working height: 900 mm - Motor: 7.5 kW - Air consumption: approx. 1200 NL/min - Cutting accuracy in the OptiCut 450 series: approx. ± 0.8 mm Features / Advantages: - Very high cutting capacity - High positioning accuracy - VarioSpeed system that minimizes gaps between workpieces - HighGrip rollers for secure material feed - Servo-driven waste gate - Can be integrated with scanners and grading lines - Proven Weinig / Dimter technology for continuous production Condition: very good Note: Technical data may vary depending on the machine’s exact configuration, control version, conveyor system, and optional equipment.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, WORKING DIMENSIONS 250x150 mm MILLING MOTOR 50 HP Lrsdew E Etyjpfx Akhou HYDRAULIC POWER PACK MOTOR 20 HP PRESSING FORCE 40T MAXIMUM WORKING SECTION 250x150 mm OUTFEED ROLLER CONVEYOR NOT INCLUDED

Stanje: zelo dobro (rabljeno), O04018) No. 1 FILTER (extraction substation) - Total air flow: 18,000 m³/h (estimated) _____ O04019) No. 1 FILTER (extraction substations) - Total air flow: 50,000 m³/h (estimated) - Power: approx. 90 kW _____ O04020) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: approx. 30 kW _____ O04021) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04022) No. 1 FILTER (extraction substations) - Total air flow: 36,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ Ledpowrdw Rofx Akhsru O04023) No. 1 FILTER (extraction substations) - Total air flow: ????? m³/h (estimated) - Power: 30 kW - No. 180 filter bags (each with a diameter of 123 mm x 3000 mm length) _____

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: K2i-5-625, skupna dolžina: 120.000 mm, skupna višina: 3.000 mm, skupna širina: 5.800 mm, skupna masa: 14.500 kg, vrsta vhodnega toka: Klimatska naprava, Oprema: varnostna svetlobna zapora, Hundegger K2i – 5-osna obdelovalna naprava – letnik 2015 Naprodaj je dobro vzdrževana in obsežno opremljena 5-osna obdelovalna naprava Hundegger K2i, letnik 2015, s možnostjo obdelave lesnih profilov do 62 cm. Naprava je bila v našem podjetju za leseno konstrukcijo uporabljena v enosmenskem delovnem ciklu in ni bila uporabljena vsak dan. Vsa letna vzdrževanja je izvajal proizvajalec Hundegger. Zadnje vzdrževanje je bilo opravljeno februarja 2026. Poleg tega je bil obnovljen zgornji del glavne rezkalke (K2-5-U5-TU-10). Naprava je v dobrem, rabljenem stanju z običajnimi znaki obrabe, ki so posledica starosti in uporabe. Tehnični podatki Proizvajalec: Hundegger Model: K2i Letnik: 2015 Izvedba: 5-osna obdelovalna naprava Maksimalni obdelovalni lesni profil: do 62 cm Dolžina lesa: do 13 m z podaljšanim podajalnikom Vzdrževanje: letno, izvajalec Hundegger Zadnje vzdrževanje: februar 2026 Razpoložljivost: od decembra 2026 Tehnična oprema Obdelovalne enote 5-osna univerzalna rezkalna enota Podmizna vrtljiva krožna žaga, 11 kW Kombinirana nosilna konstrukcija za vertikalno delujoča orodja Vertikalna vrtalna naprava, 2,2 kW Kombinirana nosilna konstrukcija za horizontalno delujoča orodja Horizontalna vrtalna naprava Ojačana horizontalna vrtalna naprava, 3,0 kW Rezalnik za lastovičji rep (60 × 38 × 16,5 mm) Ledpfxoz Rixye Akhoru Označevalna naprava na zadnji strani Označevalna in opisovalna naprava na spodnji strani Transport lesa in ravnanje z materialom Popolnoma avtomatski dovod lesa Popolnoma avtomatska hidravlična postaja za obračanje tramov Podaljšan podajalnik in valjčni transportni sistem za les do dolžine 13 m Valjčni transportni sistem za izmet lesa z izmetalnikom Podaljšani valjčni transportni sistem, dolžina 5,30 m 5-ramenski nosilec za les Nadzor in varnost Elektronski nadzor s proizvodno programsko opremo Hundegger Daljinsko vzdrževanje Varnostne naprave in ograja Vzdrževanje in stanje Napravo je redno vzdrževal proizvajalec Hundegger. Letno vzdrževanje proizvajalca Zadnje vzdrževanje februarja 2026 Obnovljen zgornji del glavne rezkalke (K2-5-U5-TU-10) Uporaba v enosmenskem delovnem ciklu Ni bila uporabljena vsak dan Dobro vzdrževano stanje z običajnimi znaki obrabe Razpoložljivost, demontaža in prevzem Naprava je na voljo od decembra 2026. Celotna demontaža, natovarjanje in prevzem morajo biti izvedeni s strani kupca na lastno odgovornost in na lastne stroške. Ogled je možen po predhodnem dogovoru. Kontakt Če ste resno zainteresirani za nakup ali imate vprašanja glede naprave, nas kontaktirajte. Dodatne tehnične informacije in dogovori za ogled naprave so na voljo na zahtevo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.884 h, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 68.462 km, moč: 397,17 kW (540,00 KM), prva registracija: 03/2014, skupna masa: 32.000 kg, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 8x4, gorivo: dizel, zavore: retarder, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 4, vzmetenje: jeklo, Oprema: ABS, centralno zaklepanje, klimatska naprava, meglenke, registracija tovornjaka, spojka prikolice, tempomat, zapora diferenciala, žerjav, Zelo dobro ohranjen, popolnoma funkcionalen stroj za cepanje lesa. Man TGs 35.540 8*4 z Adblue, model Chippo 5010 dT, vrtljiv. Lsdpfx Aoz E S Swekheru 4272 ur delovanja rotorja.