Stiskalnica za upogibanje/ravnanje

unbekannt hydraulisch

Stanje: dober (rabljeno), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press Gtodsh Tk Daopfx Afqet - Flat bar bender: hydraulic profile bending machine - Base frame: on castors, table foldable on both sides - Mode of operation: manual and automatic modes - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm - Weight: 404 kg

Stanje: rabljeno, Leto izdelave: 2004, Press force: 80 t Stroke: 16 - 63 mm Stroke rate: 100 – 750 strokes/min Upright gap: 970 mm Installation height (stroke + ram adjustment, upper position): 380 mm Lateral frame opening: 380 mm Table surface: 940 x 910 mm Clear hole in table: 770 x 190 mm Table height above floor: 1,180 mm Ram surface: 940 x 510 mm Ram adjustment: 76 mm Material width: 203 mm Material thickness: up to 6.0 mm Feed length: 0 - 120 mm Drive power: 37.0 kW Weight: 14.50 t Space requirement: approx. 2.7 x 1.7 x 3.6 m Approved for automatic operation according to CE standard With infinitely variable three-phase motor drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, automatic ram adjustment, fixed table, oil recirculation lubrication Mechanical roller feeder Bruderer BBV 205/120, driven via main shaft/universal shaft of the press Guethle CK support arms An optional soundproof booth can be offered – price upon request. Gtsdpfsvuua Nsx Afqot

Stanje: rabljeno, Decoiler for wire tilted hydraulically: yes for wire coils up to 2 t year of manufacture: unknown complete with hydraulics +++++ Please note that the machine is in a disassembled and ready-to-load condition. For this reason, testing under power or producing a video demonstration is not possible. Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, sending additional images is not possible. Gedpfx Ash Tafxjfqstt +++++

Stanje: dober (rabljeno), Cable cutter -Cable cutter: hydraulic Gtodpfx Afod R Ew Rsqet -without: hydraulic power unit -maximum opening: 95 mm -quantity: 1 cable cutter available -dimensions: 530/180/H80 mm -weight: 13.3 kg

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), A used, very well-maintained cold circular saw from EISELE equipped with a 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: Round 90°/45° right/left/30° right: 130/130/105mm Gsdpfskfp D Tjx Afqjtt Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100x100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865 x 1332 x 2175mm Weight: 460kg For further technical data, please refer to the PDF document. Technical data and dimensions: Subject to change and errors.

Stanje: dober (rabljeno), Leto izdelave: 1964, guillotine shear, sheet metal shear, plate shear, hydraulic shear, hydraulic shears - Guillotine shear: hydraulic - Cutting width: 2580 mm - Max. cutting thickness: Steel 2 mm / Aluminium 3 mm - Space requirement: 3020 x 2000 x H1320 mm Gjdpfxshr Exie Afqott - Transport dimensions: 3020 x 2000 x 1320 mm - Weight: 3185 kg

Stanje: dober (rabljeno), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinding machine puller, cylindrical grinding machine puller, dresser head, truing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Godpfxewv N Ice Afqott -Puller: Grinding wheel puller with hydraulic feed -Dresser head: without diamond tip, see photos -Dimensions: 350/70/H235 mm -Weight: 12.6 kg

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. Gtjdpofxyhfefx Afqot In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: dober (rabljeno), Lifting rod, lifting gearbox, lifting drive, lifting linkage -Lifting rod: Hydraulic lifting rod -Type: Unfortunately no type designation -Part no.: 831/65 U10-2.8 -Dimensions: see photos -Size: 1070/210/H130 mm -Weight: 12.7 kg Gjdswah Icjpfx Afqstt

Stanje: dober (rabljeno), Splitting wedge, separating wedge, crimping tool, hydraulic compression tool, cable shears, cable cutter - Cable shears: splitting wedge, separating wedge, hydraulic - Intermediate dimension: 95 mm - Wedge length: 100 mm - Quantity: 3x wedge tools available Gedovvagdepfx Afqjtt - Price: per piece - Dimensions: 550/100/H175 mm - Weight: 13.5 kg/piece.

Stanje: novo, Sheet length: 1050 mm Sheet thickness: 1.0 mm Approx. weight: 0.185 t Dimensions (LxWxH): 1.4 x 0.7 x 1.12 m Gtjdsd Eqrpopfx Afqjt Details: - with base frame - asymmetric roller arrangement - with pre-bending feature - wire insertion groove in lower and rear rollers - adjustment of lower roller via central lever - with gear drive - operating manual in GERMAN and ENGLISH For catalog, see the following link:

Stanje: dober (rabljeno), Splitting wedge, separating wedge, crimping tool, hydraulic crimping pliers Gtjdpfxevvafyj Afqet - Crimping tool: splitting wedge/separating wedge, hydraulic - Intermediate dimension: 67 mm - Insertion width: 70 mm - Quantity: 2x wedge tools available - Price: per piece - Dimensions: 410/130/H62 mm - Weight: 6.5 kg each

Stanje: dober (rabljeno), Cable cutter, separating wedge, crimping pliers, hydraulic compression pliers - Splitting wedge: separating wedge, hydraulic Gtedpfx Ajvvagksfqot - Intermediate dimension: 65 mm - Insertion depth: 40 mm - Dimensions: 565/154/H105 mm - Weight: 20.1 kg

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, notranja dolžina: 7.400 mm, notranja širina: 1.600 mm, notranja višina: 2.200 mm, Praškasto lakiranje – celotna proizvodna linija za velike dele – vključno s pečjo za žganje 7.400 mm, letnik 2018-2021 Celotna praškasta lakirna naprava za velike dele, sestavljena iz: • PEČ (1): Vismont KWP-440/114 – notranja dolžina 7.400 mm – letnik 2018 Gtsdjxrd A Depfx Afqjt • PEČ (2): Libra SLET40-25-20 – letnik 2020 • PRAŠNA KABINA: Vismont KNP-1500/06 – letnik 2018 • PRALNA NAPRAVA: Libra MR35-21-17 – letnik 2021 • ROČNA PRALNA NAPRAVA: Libra MR42 – letnik 2020 • FILTRIRNI SISTEM: Kemper 390600 – letnik 2016 • ROČNI SISTEM ZA PRAŠKASTO LAKIRANJE: Nordson Encore HD MPS – letnik 2021 • VIJAČNI KOMPRESOR: Kaeser SM 15 – letnik 2013 • OBESNI TRANSPORTNI SISTEM • VILIČAR: Hyundai 30L-7A – letnik 2012 Vse naprave so v obratovanju in popolnoma funkcionalne. Cena: odvisna od tega, ali gre za delni ali celotni nakup.