Lapirna plošča - Lapirni disk

Krebs & Riedel 1A2 Diamant-Seitenschleifscheibe

Stanje: rabljeno, Leto izdelave: 1985, Grinding length 600 mm Grinding width 200 mm Total power requirement 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors, without obligation, ex-stock: JUNG Horizontal precision surface & profile grinding machine with microprocessor control Model JF 520 MS Year of manufacture 1985 2225 _____ Max. grinding length (table longitudinal movement 600 mm): 600 mm Max. grinding width (cross movement 230 mm): 200 mm Max. grinding height under the wheel: approx. 230 mm Max. distance table – spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep feed grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. grinding head vertical speed: 500 mm/min Grinding wheel size: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, stepless: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total drive approx.: 7.5 kW - 400 V - 50 Hz Weight approx.: 2,300 kg Accessories / Special Features Gijdpfx Adewd Tx Us Aop • Microprocessor program control (SIEMENS) with simple display. Program sequences are set via decade switches and stops (with vernier) and monitored on the display. • Programs: Plunge grinding with/without cross positioning, surface grinding with incremental or continuous cross movement, creep feed grinding in conventional or counter direction with/without cross positioning. All programs include automatic roughing, finishing, sparking out cycles and automatic retraction. • Automatic straight dressing device AF 65 S with automatic compensation of dressing amount and automatic adjustment of spindle speed for consistent cutting speed (with display) • DIAFORM – wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed unit with feed rate and motor load display • Short stroke device for controlling the table reversal and cross table clamping • Swivelling JUNG sine magnetic chuck 450 x 180 mm, mounted. Additional swivelling sine magnetic chuck 350 x 175 mm, fine pole with stop. • Coolant system with paper band filter, further accessories, operating manual Condition: Very good, with accuracy protocol from JUNG technician! Please click here for a video of the machine: Delivery: ex-stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2026, stanje: novo, Mobile cleaning centrifuge including buffer tank for wastewater, agitator, and double diaphragm compressed air pump. - New machine - Numerous other versions and special designs available on request. Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing, general solid-liquid separation, coolant processing, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces in the system of over 1800 times gravity - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on expensive additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process fluids up to 70°C (optional cooling available) - Frequency-controlled motor drive for gentle acceleration and braking of the rotor Looking for innovative solutions for surface finishing and process water treatment? We offer a wide range of systems in the fields of vibratory finishing, drying, and process water technology tailored exactly to your requirements. From development to production: we supply all our products from a single source and everything is "Made in Germany." ----- Please do not hesitate to contact us, we are happy to assist you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Gjdpfxof Sqfqe Ad Asip This offer serves solely as an online presentation of our goods. Contract negotiations take place electronically (email, fax, phone, messaging portal), where we first provide you with a non-binding quotation, and at the same time inform you about our general terms and conditions, right of withdrawal, and legal notice before any purchase/contract is concluded.

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Godpfxjcxxx Ho Ad Aoip Ram adjustment: 63 mm Strokes per minute: 140 spm Total power requirement: 7 kW Machine weight approx.: 3.5 t

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, potovalna razdalja osi X: 200 mm, pomik osi Y: 220 mm, pomik po osi Z: 280 mm, proizvajalec krmilnikov: HEIDENHAIN iTNC530, teža obdelovanca (maks.): 15 kg, širina mize: 200 mm, dolžina mize: 200 mm, hitrost vretena (min.): 42.000 obr/min, CNC krmiljenje: HEIDENHAIN iTNC530 Osi Pomik X-os mm: 200 Pomik Y-os mm: 220 Pomik Z-os mm: 280 C-os v stopinjah: 360º A-os v stopinjah: -15º max.130º Delovna miza Dimenzije palete mm: ø200 Maks. teža obdelovanca kg: 15 Vreteno Maks. hitrost vretena rpm: 42.000 Hlajenje Hlajenje skozi vreteno bar: 40 Sistem orodja Vpenjalno držalo: HSK-E32 Število orodij v magazinu: 60 Maks. premer orodja mm: ø50 Maks. dolžina orodja mm: 200 Čas menjava orodja (span-to-span) s: 10 Gjdexpg H Hopfx Ad Ajip Oprema Avtomatizacija LM100 (EROWA ITS72, 5 nivojev z 9 pozicijami); maksimalno rokovanje 10 kg Elektronski ročni upravljalnik Transporter za odrezke Infrardeča sonda Visokotlačna črpalka NC rotacijsko-nagibna miza Skupna potrebna moč kVA: 40

Leto izdelave: 1987, stanje: rabljeno, Kehren rotary table type RS 7C, used Manufacturer: Kehren, Honneff Reference no.: 4179 Year of manufacture: 1987 Control: Siemens 3G PLC: Siemens S5 Grinding motor: BBC QUB 200 Rotary table diameter: 750 mm Grinding head diameter: 460 mm Control panel with display Coolant system Rinsing pump Coolant pump Automatic paper band filter system Giedpjhgmwgofx Ad Aop Control cabinet

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm Gedpfxouhbv So Ad Asip LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Leto izdelave: 1992, stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system Godet Hw Naepfx Ad Ajip • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.

Stanje: dober (rabljeno), Centre bore: 2-50 mm Workpiece diameter: 8-125 mm Workpiece length: 50-1000 mm Grinding wheel speed: 13,000-45,000 rpm Gisdpfxorivluo Ad Asp Various accessories MARCELS MASCHINEN AG

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine Gisdpfx Adoi Eg Nko Ajp - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1308 kg

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors Gedpfx Ast Hw Shsd Aeip in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice