Pallet rack with storage shelves

unbekannt 2500/2750/860 mm

Stanje: rabljeno, Okvir: 3750*1100 mm Prečke: 1800*80 INP in 2700*100 INP mm Če potrebujete police ali dodatno opremo v drugih konfiguracijah ali izvedbah, nas prosimo kontaktirajte. Cedpfx Afspu Amhswjhd Ponujamo obsežen program novih in rabljenih polic ter dodatne opreme in vam z veseljem pomagamo pri načrtovanju. Na voljo je tudi dodatna oprema, na primer: okvirji, vogalni zaščiti, zaščita proti trčenju, varnostne naprave proti premikanju, iverne plošče, rešetke, rešetke za zadnjo steno, globoke prečke. Dostava: Prosimo, vprašajte za stroške prevoza, pri čemer navedite vašo poštno številko in kraj ter količino želenih izdelkov. Dodatne storitve: načrtovanje, montaža/demontaža polic, odkup/prodaja. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do prodaje medtem.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Chsdpfxjmhh Dho Afwsd Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Csdpfx Afemhh Dtewohd - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, dolžina mize: 1.000 mm, širina mize: 1.000 mm, obratovalni tlak: 3.800 letvica, WJS NC 1313 Easy Cut (Photos show current condition) - prepared for two cutting heads (1x pure water) - control system will be renewed - will be sandblasted and newly painted - pump available as an option - available 12-16 weeks after order Chedpfx Ajnab Rljfwsd Special features: - maximum of two cutting heads per Z-axis - can be individually customized to customer requirements - 12 months or 2,000 hours warranty (excluding spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us for your customized offer!