Nosilna plošča

unbekannt 1200 x 1100 mm

Stanje: novo, Leto izdelave: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are paramount. This model features a swivel arm from 0 to 60°, with carbide guides for the saw blade. The frame design ensures precise and quiet operation. Machine Characteristics The horizontal band saw for metal with a pivoting arm allows for perpendicular cutting to the axis of the material or at any angle within a 0–60° range. The material can be fed manually or by any mechanical device, while tool feed is automatic. The blade guides are fitted with special carbide and bearing inserts, which greatly influence blade guidance, its service life, straightness, accuracy, and cutting quality. Carbide guiding significantly reduces wear on the machine and blade. The machine is equipped with a powerful coolant pump in a closed-loop system. The arms of the saw are made of one-piece cast iron and, combined with a 27 mm wide cutting blade, enable high-volume series cutting for both profiles and solid materials. The vise is mounted on an adjustable bed and is equipped with a quick-release clamp. The blade guides use hard metal (carbide) plates and a bearing system, ensuring high accuracy and straightness of cuts thanks to carbide guides. The base features a cast iron worktable with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting motion comes from the movement of the blade, while the arm moves down. The descending speed (cutting speed) is controlled by a hydraulic cylinder. Feed speed is regulated on the saw’s control panel. Two blade speeds are available: 37.5 and 75 m/min. Once the arm reaches the lowest position (after completing the cut), the blade drive switches off automatically. Safety is provided by the blade guards and micro-switches that stop the motor at the end of the cutting cycle or if any guard is opened. Additional protection switches off the saw automatically in case the blade breaks. Power transmission is via a motor with a worm gear drive. The motor is equipped with a thermal protection fuse to prevent overheating during operation. Technical Data: TOTAL POWER: 1.5 kW SUPPLY VOLTAGE: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE SIZE: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VIC HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Laodeudi Unjpfx Aamed Cutting Capacity (Diameter x Profile x Square): Angle 0º: ø220 / 260 x 140 / 200 x 200 mm Angle 45º R: ø160 / 160 x 140 / 160 x 160 mm Angle 60º R: ø100 / 120 x 100 / 100 x 100 mm Price does not apply to machines purchased in Poland.

Stanje: rabljeno, Metal band saw Hans Schreiner MBS270, good condition, 1.5 kW, 2450 mm band length, 227 kg Lasdpjwzzgnefx Aamed Prices subject to change without notice. Errors, misprints, and typographical mistakes excepted.

Stanje: zelo dobro (rabljeno), Ogrevalni kotel Viessmann Vitorond 100kw/6101/01 Ledexq Hvqjpfx Aamjad

Stanje: novo, Leto izdelave: 2023, Manufacturer: CGM e41 Continuous output (3-phase): 41.0 kVA / 32.8 kW Maximum output (3-phase): 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA – approved for stationary applications only Cooling system: Water-cooled Fuel: Diesel Cylinders: 4 Displacement: 3,319 cm³ Aspiration: Naturally aspirated Speed: 1,500 rpm Fuel consumption at 3/4 load (L/h): 8.5 Laodpfx Aaeq A U Aiomjd Generator: MECC ALTE Type: Brushless AVR regulation Digital control unit: ComAp AMF Dimensions & Weight: Length: 2,000 mm Width: 850 mm Height: 1,275 mm Dry weight: 880 kg Fuel tank capacity: 200 l Oil catch pan Engine coolant pre-heater Battery trickle charger 3-way valve Soundproof canopy: RAL 5015 Sky Blue Base frame: Black

Stanje: dober (rabljeno), Vice, bench vice, engineer's vice, parallel vice, heavy-duty vice Lajdskvrpwopfx Aamjd - Parallel vice: jaw width 150 x 30 mm - Clamping width: 190 mm - Quantity: 1 unit available - Dimensions: 485/210/H190 mm - Weight: 26 kg

Stanje: novo, vrsta goriva: dizel, barva: rumena, obratovalna teža: 2.000 kg, stanje verige: 100 odstotek, emisijski razred: Euro 5, Leto izdelave: 2026, Oprema: UVV varnostni pregled, dodatne luči, gumene gosenice, hidravlika, hidravlika prijemala, hidravlično kladivo, kabina, računalnik na krovu, standardna žlica, NEW: Shantui SE20 Mini Excavator (2.0 t) Lajdpfxowg Etis Aamed Premium Features at an Outstanding Price – Now Available for Pre-Order at Bagger2go! The brand-new Shantui SE20 has arrived! Compact, powerful, and equipped with high-quality features – ideal for landscaping, civil engineering, construction companies, and rental businesses. Engineering that impresses: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Swing Motor: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Undercarriage: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access points • Articulated boom: maximum flexibility even in confined spaces • Two travel speeds: precise maneuvering or fast travel • Hydraulic control: AUX 1 & AUX 2 digitally controllable – adjustable flow rate for precise operation • Controls: Proportional joysticks with rocker switches – intuitive and precise handling Your advantages: • Secure your pre-order now – special terms available for a limited time only • Lease-purchase possible – we offer flexible financing solutions • Direct from Bagger2go GmbH – your partner for compact construction machinery

Stanje: novo, Leto izdelave: 2025, Working width: 408 mm Cutterhead: Strip knife Number of knives: 3 Planer table length: 1640 mm Planer fence angle adjustable: yes Planer tables fold up: manual Maximum thicknessing planing height: 225 mm Thickness table height adjustment: handwheel Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: continuous Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Lasdpjwfcqcofx Aamjd Machine width: 870 mm Weight: 260 kg

Leto izdelave: 2023, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Oprema: kompresor, sistem stisnjenega zraka, FIAC AB 300 - 678 - Previous year's model, very competitively priced. Lasdpfx Aaou Dxu Hsmsd - Multiple units available from stock. Specifications: Tank: 270 L Compressor capacity: 650 L/min Pressure: 10 bar Power: 4 kW Pump type: AB 678 2/2 RPM: 1000 Code: 1121560311 EAN: 8020119109861 Dimensions: 1600x560x1040 mm (LxWxH)

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Lsdpfsyidvdsx Aamead Price: on request. Further technical details and documentation available upon request.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F9B192402, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 350 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hod vretena: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 5 m/min, skupna višina: 1.990 mm, skupna širina: 2.030 mm, skupna dolžina: 1.980 mm, širina mize: 270 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 450 kg, skupna masa: 2.270 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 450 kg, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, EMCOMAT FB-450 MC with Sinumerik 828D Path Control with “Manual Machine” Universal tool milling and drilling machine equipped with Sinumerik 828D path control and hydraulic tool clamping Working area X450/Y350/Z400mm Lodpfoxapdcex Aamjad Drive power 7/10 kW Speed range from 10–5000 rpm Feed rate from 10–5000 mm/min Rapid traverse up to 5000 mm/min Machinist’s precision as per DIN 8615 Tool holder: DIN 69871 SK40 Includes: • Linear guides • Ball screw spindles • Vertical milling head, swivels +/-90°, with 80mm quill travel • Swivel-out device for vertical head • Hydraulic tool clamping • Coolant system • LED machine lamp • Fixed angle table 800x400mm • Work area guard incl. chip tray • Automatic central lubrication • Operating tools • Documentation • Machining with open door (Operating Mode 3) • Controlled and manual operation modes combined in one machine • Sinumerik 828D path control incl. control package for 3 axes with ball screws and servo motors, Process cycles with graphical user support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on bolt circles and linear hole patterns, rectangular and circular pockets, slot milling cycle, facing cycles, etc., USB interface