CNC stružnica švicarskega tipa

TSUGAMI BW 20 E

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Godpfx Ajwuddvefqeil Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Gjdpfxjvivx Nj Afqoil Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Leto izdelave: 1978, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically variable from 1 m/min to 7 m/min Return stroke speed: hydraulically variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Gijdpfoiw Dlkex Afqel Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Remarks: The machine is ideal for the production of keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.

Stanje: rabljeno, Leto izdelave: 2010, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, obremenitev mize: 1.500 kg, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 1.800 obr/min, skupna masa: 14.000 kg, - Krmiljenje Heidenhain iTNC 530 - 5 osi - Fiksna miza z integrirano vrtljivo mizo premera 750 mm (500 kg) - Notranje hlajenje pri 40 bar - Menjalec orodij za 60 orodij (SK 40) - Rezkalna glava z osjo B - Transporter za odrezke Gijdpjx Ni Ezefx Afqol - Razpršilna pištola - 3D Quick Set - BLUM laserski merilni sistem - Neposreden merilni sistem pomika - 2 rotirajoči čistilni okni Vpenjalna površina mize: 2100 x 700 mm Vpenjanje ISO: SK 40 Pogon vretena: 35 / 25 kW Hitri pomik: 40 m/min Menjalec orodij: 60 mest Potreben prostor cca. 5,5 x 3,5 x 2,7 m

Stanje: rabljeno, Leto izdelave: 2007, Maximalni prečnik struganja 42 / 140 mm Dužina struganja 170 mm Upravljač Mitsubishi Meldas Obrtaji vretena 80–8.000 o/min C-osovina 0,001° Revolverska glava (x-puta) 2x 12 (VDI 20) pogonjena Obrtaji revolverske glave 45–4.500 o/min Snaga vretena 1 kW Abgreif stanica 42 mm Obrtaji 60–6.000 o/min C-osovina 0,001° Broj upravljanih osa 8 Uređaj za stezanje steznih čaura 48 DIN 6343 Radni sati 10.769 h Transporter strugotine da/godina 2018 Gsdpfevyli Eex Afqsil Ukupna snaga 7,5 / 11 kW Težina mašine cca. 3,3 t Dimenzije cca. 2,4 x 1,6 x 2,2 m CNC strugarsko-glodalica CITIZEN BOLEY BE 42, godina 2007 Simultani rad sa 7 osa na glavnom i prihvatnom vretenu Vrlo dobro stanje, radni sati 21.999 h (septembar 2024) Oprema: # razni nosači alata: 5x aksijalni pogonjeni nosač alata # stezno telo za stezne čaure, tip 173E # dodatni rashladni uređaj # transporter strugotine Knoll, godina proizvodnje 2018 Boley BE 42 se prodaje bez automatskog magazina za šipke. Interfejs za povezivanje postoji. Zamena kompletnog seta baterija izvršena 22.12.2025.

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions Gisdeh Rdwxopfx Afqol - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Godpfx Ajh Dzqlefqjil

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 119.571 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Machine ON: 119 571 h, vreteno ON: 56 792 h - Vreteno HSK-A63 10.000 min⁻¹ - 32 orodnih mest Gisdpfjxcp Srjx Afqsl - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom HSK100 (če ni potreben, ga je mogoče zapreti ali predelati v sistem za vpenjanje na ničelni točki) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s trakastim filtrom iz papirja, 80 bar - Pištola za splakovanje ostružkov - Transporter za ostružke - Ročni upravljalni modul - Samodejna kabinska vrata - 32 orodnih mest plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merilna sonda za orodja (bočna) - Merilna sonda Renishaw - Zabojnik za ostružke - Signalna luč za status Stroj je bil popolnoma preverjen in ima geometrijski protokol ter meritve krožnosti. Stroj si je mogoče kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro vzdrževano stanje.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Gjdpevtancefx Afqjil Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer Gjdpoul Efmsfx Afqsil - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data