CNC center za struženje in rezkanje

Traub TNX65

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Ihedjwp D Nbjpfx Af Tet Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup Ihsdpfxoxp Hmae Af Tet - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Opis sledi Iodpfex A Hdfsx Af Teht

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Iodpow E Nnbjfx Af Teht Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: rabljeno, New diesel generator set, power generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby power: 55 kVA / 44 kW Rated current: 33 amps Voltage: 400/230 volts, 50 Hz    230 volts, 50 Hz Fuel tank capacity: 99 liters – provides an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby: approx. 4 liters/hour Drive engine: 4-cylinder inline diesel engine RICARDO ZH4105ZD Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple, compact construction with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) - Terminals for cable power connection for external consumers, e.g. site distribution boxes - ATS module for mains backup operation, enabling automatic emergency power switchover in the event of mains failure Ihedsxlkq Uopfx Af Tjt Space requirement (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg Brand new machine from stock

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 Iedpfeuhadzjx Af Tjht - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 37.000 h, Funkcionalnost: popolnoma funkcionalen, TRAUB TNX65 with Bar Loader and Accessories Year of manufacture: 2006 Operating hours: 37,000 h Control system: TX8i - Both tool turrets newly resealed - High-pressure pump replaced - Machine fully operational Ijdpfx Afowm Igfe Teht - Geometric accuracy within manufacturer’s tolerances Accessories: - 2x Hainbuch chucks - Various tool holders (see photos) - Breuer bar loader (1,200 mm) - Number of spindles: 2 - Number of turrets: 2 MAIN SPINDLE - Spindle mount: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle mount: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - X/Z travel: 175 / 650 mm - Y travel: ±40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel) Ijdpfx Afevz Tyuj Tjht

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Ihedpfx Aoq Npqmef Tst Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 119.571 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Machine ON: 119 571 h, vreteno ON: 56 792 h - Vreteno HSK-A63 10.000 min⁻¹ - 32 orodnih mest - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom HSK100 (če ni potreben, ga je mogoče zapreti ali predelati v sistem za vpenjanje na ničelni točki) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s trakastim filtrom iz papirja, 80 bar - Pištola za splakovanje ostružkov - Transporter za ostružke - Ročni upravljalni modul - Samodejna kabinska vrata - 32 orodnih mest plus 87 dodatnih mest ZM87 Iedpfx Afoxcp Srj Tjht - Toplotna kompenzacija - BLUM merilna sonda za orodja (bočna) - Merilna sonda Renishaw - Zabojnik za ostružke - Signalna luč za status Stroj je bil popolnoma preverjen in ima geometrijski protokol ter meritve krožnosti. Stroj si je mogoče kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro vzdrževano stanje.