CNC center za struženje in rezkanje

Traub TNX65

Stanje: rabljeno, Leto izdelave: 2005, Technical details: Njdowp D Nbjpfx Ag Nsdd Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power 25% duty cycle: 5.8 kW Tool holder: DIN 69880 40 x 63 Total power requirement: 95 kW Approx. machine weight: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers extraction system, coolant unit with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Nsdpfx Aget I Di Ao Nsdd Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: rabljeno, Leto izdelave: 2005, Swing diameter: 275 mm Turning length: 900 mm Control: TRAUB TX8i Spindle bore: 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds - stepless: 1 - 5,000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Tool carrier No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool carrier No.2 / No.3 / No.4 X-axis: 170 mm Njdpfx Aow E Nnbsg Nodd Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar loading magazine: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Hexagon max.: 45 mm Total connected load: 95.00 kW Machine weight approx.: 16.00 t Space requirement approx.: 10.00 x 3.50 x H3.00 m With TRAUB TX8i control, main and counter spindle with C-axis, 3 pcs. turret tool carriers, 1 pc. vertical tool carrier with B-axis, extraction system, chip conveyor, coolant unit with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 3 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main chuck diameter: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel distance: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW LEFT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm Nodpfouhadzex Ag Njdd - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z travel: 175 / 650 mm - Y travel: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive: 95 kW DIMENSIONS AND WEIGHT - Required floor space: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg MACHINE HOURS - Operating hours: 50,000 h ACCESSORIES - Control: Traub TX8i-S - Electronic handwheel - 3-color status light - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Number of driven tool holders: 6 - Number of static tool holders: 33 - Collet chuck: 2 HAINBUCH

Stanje: rabljeno, Turning diameter . mm Turning length . mm Swing diameter over bed slide . mm Emco Hyperturn 665 (3 units) Ndsdpfsqn A Rrsx Ag Nsd - Technology: Lathe - Machine designation: EMCO Hyperturn 665 Lathe - Year of manufacture: 2003 / 2012 / 2013 - Control: Siemens Sinumerik 840D-PCU 50 V1 - Attachments: Coolant system; chip conveyor - Electrical supply data: - Rated current: 110.00 A - Backup fuse: 125.00 A - Connected load: 56.00 kW

Stanje: rabljeno, Leto izdelave: 2011, obratovalne ure: 51.400 h, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNX65, TX8i-s, Year 2011 Model: TNX 65 Year of manufacture: 2011 Control: TX 8i-s Main / sub spindle bar capacity up to 65 mm, 3 turrets, 3 x Y-axis, driven tools, 2 x C-axis, sub spindle, chip conveyor, belt filter, coolant system, parts conveyor, New hydraulic pump Extensive accessories: approx. 4 driven tool holders, 15 fixed tool holders Short bar loader Breuning Approx. 114,586 operating hours Approx. 51,400 production hours Ndjdpewxc Hkofx Ag Njd Good condition Under power, available for inspection Delivery time approx. 2 weeks, by arrangement

Stanje: dober (rabljeno), Leto izdelave: 2007, Traub TNX 65/42 obdelovalno-sučilni center Leto izdelave: 2007 Serijska št.: 7060107 Vklop v obratovanje leta 2010 Krmilnik TX 8i-S (krmilnik na osnovi Mitsubishi/Traub s pogoni in motorji Mitsubishi) 15 CNC osi 4 X-Y-Z revolverji s po 10 postajami. Do 20 orodij na revolver Nodpeq Npqmsfx Ag Nedd Prehodna odprtina vretena in podvretena 65 mm (podvreteno ima spiranje s hladilno tekočino) Nožni pedal za vpenjanje/izpenjanje vpenjal vretena Servomotorni grabilnik gantry Hidravlični obračalni prijemalec z pnevmatskim prijemalom za obdelan kos in ostanek palice Transportni trak za odvod obdelancev RESY papirni pasovni filter hladilne tekočine Rezervoar za hladilno tekočino Knoll z BKW hladilno temperaturno regulacijo Visokotlačna črpalka za hladilno tekočino, 20 bar, in nizkotlačna črpalka, 8 bar Transportni trak za ostružke Knoll Revijski podajalnik palic FMB Turbo 5-55 (nov 2010) 2 enojna držala za stružna orodja 2 dvojna držala za stružna orodja 1 držalo za odrezovalno orodje 1 pogonsko dvojno radialno držalo za živa orodja tipa ER collet 1 pogonsko radialno držalo za živa orodja tipa ER collet 4 radialna pogonska držala za živa orodja tipa ER collet 1 radialno pogonsko držalo za rezkar tipa End Mill 1 kotno nastavljivo pogonsko držalo za živa orodja tipa ER collet 2 radialni pogonski držali za rezkar tipa Shell Mill 2 aksialni pogonski držali za rezkar tipa End Mill 6 aksialnih pogonskih držal za živa orodja tipa ER collet 43 dodatnih držal za orodja – ločen seznam (glejte prilogo) Glavno vpenjalo vretena: Hainbuch collet chuck Podvreteno: Rohm dvokrako vpenjalo 2 rezervna kompleta vretenastih vreten Z-osi in ležajnih paketov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.100 mm, Travels X-axis 2000 mm Y-axis 1000 mm Z-axis 1100 mm Machine Bed Table length 2200 mm Table width 850 mm Spindle Drive Spindle speed 60-3000 rpm Motor power 38 kW Tool holder ISO 50 Nedpfouzwpdox Ag Nodd Rapid Traverse and Feed Feed range: X-axis 20000 mm/min Y-axis 20000 mm/min Z-axis 20000 mm/min Accessories Chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2000, Traub TNL12/7 CNC Automatic Lathe Ndjdpfx Aepuilvog Njd Spindle bore: 12.7 mm Turning length: 130 mm Main spindle: 4 kW; C-axis 0.001°; 12,000 rpm Turret 1 - axes X1 and Y1, 6 stations, driven tools 1.5 kW Turret 2 - axes X1 and Z2, 6 stations, driven tools 1.5 kW Subspindle: 2.5 kW; C-axis 0.001°; 12,000 rpm Front tool post - axes Z3; Z4/X3, driven tools Rear tool post - axis X4, driven tools 1.5 kW FMB Minimag bar feeder The machine comes with a wide range of accessories and tool holders. The machine is connected and currently in continuous production. 1. TNL12/7 s/n: 248 y/m: 2000, 7 linear axes (X1, Z1, Y1, X2, Z2, X3, Z3 + 2x C-axis) + FMB Minimag + Knoll chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 47.600 h, številka stroja/vozila: 325, Dobro ohranjena Ndsdpfxeh Dzqlo Ag Ned