CNC avtomatska stružnica

TRAUB TNK 36

Stanje: dober (rabljeno), Maximum bar capacity: 36 mm Maximum spindle speed: 6,300 rpm Number of spindles: 2 Control system: Traub TX8i Tool carrier 1: Number of tools: 12 X-axis travel: 50 mm Z-axis travel: 50 mm Front tool carrier: Number of tools: 7 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Rear tool carrier: Number of tools: 5 Spindle speeds: 150 - 3,000 rpm / 300 - 6,000 rpm Mounting diameter: 40 mm X-axis travel: 73 mm Bar feeder: FMB Turbo 5-42 Bar length: 3,200 mm Bar diameter: 5 - 42 mm Country of origin: Germany Hnsdpfxjtrvzxj Aagsk Machine dimensions (LxWxH): 3,400 x 1,300 x 1,700 mm Machine weight: 4,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Splošni podatki Teža stroja: 2200 kg Višina: 1700 mm Hsdsx D Dwfjpfx Aagsnk Globina: 1200 mm Dimenzije Dolžina stroja: 2200 mm Ta triosni stroj Star SR 20 R III je bil izdelan leta 1996. Omogoča največji premer struženja 20 mm, hitrost vretena do 8.000 vrt/min in hitro pomično hitrost 35 m/min. Idealno za precizno struženje, omogoča šest fiksnih postaj za stružne nože ter pet radialnih pogonskih postaj. Če iščete visokokakovostne stružne zmogljivosti, razmislite o stroju Star SR 20 R III iz naše ponudbe. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 344, skupna masa: 7.000 kg, skupna širina: 2.000 mm, skupna dolžina: 11.000 mm, skupna višina: 1.900 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8i, TRAUB TNK 36 CNC Lathe - Operating voltage: 460 V - Connection: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm Hnjdpfxjyh Hkzo Aagek - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Applied force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Applied force X/Z: 2,800/2,120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Applied force X/Z: 4,240/4,240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Including the clamped tool holders visible in the photos, as well as a chip conveyor and a coolant system by Resy, plus a bar feeder by FNB, type: TURBO 5-42 Note: The item must be collected on a binding date to be agreed between April 1st and 2nd, 2026. FCA D-79115 Freiburg – loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 vključuje transporter ostružkov, filtrirni sistem Resy Hnsdpfxsxv Sr Ie Aagek v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Stanje: zelo dobro (rabljeno), Star SA-12 Swiss Type Automatic Lathe Technical Data Rapid traverse (X, Y, Z, ZB): 370 mm Maximum feed rate (X, Y, Z, ZB): 270 mm Minimum input increment (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive type: Spindle drive Main spindle motor: 2.2 / 3.7 kW Spindle indexing angle: 1° or 15° Spindle bore: 20 mm Tool Slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1,970 / 2,330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Sub Spindle Max. clamping diameter: 13 mm Max. part length for front ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8,000 rpm Sub spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Electrical Supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF DELIVERY Hnsdpowi Ty Ajfx Aagsk Includes (non-exhaustive list): - STAR SA-12 Swiss type automatic lathe - Control unit: Fanuc Series 18i-T - Fire extinguishing system - Coolant tank - Transformer - LNS bar feeder Exact scope of delivery as per photo gallery No guarantee is given regarding the accuracy, completeness, or currency of the information provided.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Hsdpfx Aaewg Takegjnk Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1998, Teile, die per Hand angezeigt werden, sind nicht im Lieferumfang enthalten. Hsdpfewb Aqnex Aagenk Technische Daten sind auf dem Bild ersichtlich.

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Hnodsv Scrhopfx Aagjk

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 32.870 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6030578, premer struženja: 32 mm, največja hitrost vretena: 8.000 obr/min, Premer palice (maks.): 32 mm, We offer for sale a Traub TNL26K CNC automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Hnjdpfxjvldx Aj Aagok Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of stationary and driven tool holders – please see the attached photo for a complete list.

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Hsdpfxow D Aq Te Aagjnk Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories