CNC avtomatska stružnica

TRAUB TNK 36

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 147.007 h, največja hitrost vretena: 6.300 obr/min, potovalna razdalja osi X: 370 mm, pomik po osi Z: 250 mm, moč vretenovega motorja: 10.700 W, Premer palice (maks.): 36 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i (64-bit), premer obdelovanca (maks.): 32 mm, število mest v zalogovniku orodij: 22, število osi: 10, Ta vodoravna stružnica z 10 osmi tipa TRAUB TNK 36 je bila izdelana leta 2002. Ima hitrost glavnega vretena 6.300 vrt/min in hitrost pomožnega vretena 6.300 vrt/min. Največji premer obdelovanca znaša 32 mm, stroj pa ima rezervoar za hladilno tekočino s prostornino približno 360 litrov. Če iščete visokokakovostne stružnične zmogljivosti, razmislite o modelu TRAUB TNK 36, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • 14-palčni ravni zaslon • Dodaten vmesnik V24-RS232 v omarici • Vmesnik MDE v omarici (status stroja in števec obdelovancev) • Fiksno navojno struženje brez kompenzacijske vpenjalne glave • Funkcija Polyform za os C • Nadzor orodja • Premer glavnega vretena: 36 mm • Moč pogona glavnega vretena: AC 6,7 / 10,7 kW • Os C glavnega vretena • Motorizirano pomožno vreteno • Premer pomožnega vretena: 32 mm • Hitrost pomožnega vretena: 6.300 vrt/min • Gib osi Z pomožnega vretena: 250 mm • Hitri pomik osi Z pomožnega vretena: 30 m/min • Os C pomožnega vretena • Vpenjalna naprava pomožnega vretena • Izmetalnik obdelovancev • Povečana sila podiranja • Vpenjalna glava Hainbuch Axfix • Gib osi X2: 50 mm • Gib osi Y2: ±20 mm • Gib osi Z2: 100 mm • Hitri pomik osi X2: 15 m/min • Hitri pomik osi Y2: 15 m/min • Hitri pomik osi Z2: 15 m/min • 12 pogonjenih orodij (preko centralnega pogona) • Hitrost pogonjenih orodij: 6.000 vrt/min • Elektronski menjalnik • Gib osi X3: 370 mm • Gib osi Z3: 250 mm • Hitri pomik osi X3: 30–60 m/min • Hitri pomik osi Z3: 30 m/min • 5 pogonjenih orodij • Premer držala orodja: 40 mm • Hitrost pogonjenega orodja: 6.000 vrt/min • Povečana sila podiranja • Gib osi X4: 73 mm • Gib osi Y4: ±50 mm • Hitri pomik osi X4: 15 m/min • Hitri pomik osi Y4: 15 m/min • 5 pogonjenih orodij • Premer držala orodja: 40 mm • Hitrost pogonjenega orodja: 6.000 vrt/min • Transporter za obdelovance na levi strani • Pnevmatski prijemalnik obdelovancev • Klešče prijemalnika: Ø 5–8 mm / Ø 8–20 mm / Ø 20–36 mm • Največja dolžina obdelovanca: 200 mm • Največji premer obdelovanca: 32 mm • Kompaktni tračni filter RESY • Hladilna enota • Prostornina rezervoarja za hladilno tekočino: približno 360 l • Pritisk hladilne tekočine: 7 bar Kdsdpfx Ajzl S Emji Nop • Pretok hladilne tekočine: 50 l/min • Dovod hladilne tekočine skozi orodje: 30 bar • Pištola za hladilno tekočino • Priključna moč: 22 kW Neobvezna dodatna oprema, ki ni vključena v dobavo: • Transportni tračni odvajalnik sekancev KNOLL 240S-1/100 (višina izmeta: 950 mm) • Priprava za avtomatski podajalnik palic (vodila Ø 25 / Ø 36) • Vrteči se oporni blok obdelovanca (gred 16 × 16 mm) • Sistem za nadzor trkov Brankamp CMS 100 (glavno in pomožno vreteno) • Avtomatski podajalnik palic FMB Turbo 5-42 XT / 3200 „C“ • Osnovna oprema s statičnimi in pogonjenimi držali orodij je vključena v dobavo Tehnične specifikacije Hlajenje skozi vreteno Da Pomožno vreteno Da Pogonjena orodja Da

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Multispindle lathe Schütte AG20 Kedpfxshrihyo Ai Nsdp

Stanje: dober (rabljeno), Leto izdelave: 2001, TNK 36 letnik 2001 Kedpfx Ajxv Sr Ioi Njdp vključuje transporter ostružkov, filtrirni sistem Resy v dobrem stanju, obratoval brez polnilnika, ni priključen na elektriko

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC-vretenski stroj Traub z nasprotno vretensko osjo, ki je bil leta 2018 generalno popravljen v tovarni, skupaj z nosilcem palic. Premer glavne vretenske osi: 36 mm, hitrost: 6300 vrt/min, premer nasprotne vretenske osi: 32 mm, hitrost: 6300 vrt/min, hod osi Z4: 250 mm, hitri hod osi Z4: 30 m/min, največja dolžina obdelovanca: 200 mm, največji premer obdelovanca: 32 mm, nadzor: Traub/Index TX8i, delovnih ur: približno 147.000 ur. Nosilec orodja na vrhu: hod osi X2: 50 mm, hod osi Y2: +/-20 mm, hod osi Z2: 100 mm, hitri hod osi X2/Y2/Z2: 15 m/min, število mest za orodje: 12, hitrost: 6000 vrt/min. Nosilec orodja na sprednji strani: število mest za orodje: 5, hod osi X3: 370 mm, hod osi Z3: 250 mm, hitri hod osi X3/Z3: 30 m/min, največji premer orodja: 40 mm, hitrost: 6000 vrt/min. Nosilec orodja na zadnji strani: hod osi X4: 73 mm, hod osi Y4: +/-150 mm, število mest za orodje: 5, hitri hod osi X4/Y4: 15 m/min, premer orodja: 40 mm, hitrost: 6000 vrt/min. Vključno s kompaktnim filtrom Resy, trakom za transport materiala Knoll 240S-1/100, nastavljivim opornikom za obdelovanec, pripravo za namestitev revije za palice, sistemom za nadzor trkov Brankamp CSM 100 in revijo za palice FMB Turbo 5-42 X, leto izdelave: 2002. Dokumentacija je na voljo. Možen je ogled na kraju samem. Kdsdjzkld Hopfx Ai Njp

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Ksdov Scrhjpfx Ai Nodp

Leto izdelave: 2000, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stružnica Traub. Število vreten: 2, višina vretena nad tlemi: 1130 mm, maks. premer struženja: 36 mm, maks. premer palice: 36 mm, maks. dolžina struženja: 100 mm, maks. hitrost glavnega vretena: 6300 obr./min, maks. hitrost kontrasnega vretena: 6300 obr./min, moč glavnega vretena: ca. 10,7 kW, moč kontrasnega vretena: ca. 10,7 kW, delovno območje pogona: glavno vreteno pomik X/Z: 370 mm/250 mm, kontrasno vreteno pomik X/Z: 370 mm/250 mm, revolver za orodja: 12 mest, pomik revolverja X/Z: 50 mm/100 mm, Y-os revolverja: +/-20 mm, maks. hitrost gnanih orodij: 6000 obr./min, sprednja mesta za orodja: 5, zadnja mesta za orodja: 5, krmilje: Traub TX 8i. Teža: ca. 4000 kg, dimenzije stroja X/Y/Z: ca. 3400 mm/1300 mm/1700 mm. Dokumentacija na voljo. Ogled možen po dogovoru. Ksdpfxezidire Ai Nsdp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 124.706 h, največja hitrost vretena: 6.300 obr/min, potovalna razdalja osi X: 370 mm, pomik po osi Z: 250 mm, moč vretenovega motorja: 10.700 W, proizvajalec krmilnikov: TRAUB, model krmilnika: TX8i (64-bit), število osi: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced features such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking for a high-quality lathe, you should consider the TRAUB TNK 36 horizontal lathe we are offering for sale. Contact us for further details. TECHNICAL DATA • MDE interface: Yes • Tool monitoring: Yes • Rigid tapping: Yes (without compensation chuck) • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Upper turret stroke X/Z: 50 / 100 mm • Rear attachment X stroke: 73 mm • Rear attachment Y stroke: ±50 mm • Main spindle C-axis: Yes • Hainbuch quick-change parts: Yes • Hainbuch setup aid base body: Yes • Hainbuch manual quick-change device: Yes • Sub spindle: Motor spindle • Sub spindle C-axis: Yes • Counter pressure device: Yes • Workpiece ejector: Yes • Hainbuch Axfix chuck: Yes • Upper tool carrier: Yes • Electronic gearbox: Yes • X3 cross-axis for front unit: Yes • Front unit: 5-position • Driven tools at the front unit: Yes • Parting-off side machining station: Yes • Driven tools at parting-off station: Yes • Workpiece unloading device: Gripper • Coolant tank capacity: 230 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Internal coolant supply: 30 bar • High-pressure coolant: 120 bar (front and rear machining station) • Coolant filter: Knoll VRF 150/750 vacuum rotary filter • Suitable filter materials: Aluminum, plastic, brass, steel • Wash gun: Yes • Connected load: 22 kW • Maximum bar length: 3 m • Maximum bar diameter: 36 mm • Operating voltage: 400 V, 3~, 50 Hz • Control voltage: 24 V AC • Valve voltage: 24 V DC • Clutch voltage: 24 V DC • Total installed power: 33 kW • Total rated current: 60 A OPTIONAL ADDITIONAL EQUIPMENT • FMB turbo 5-42 XT / 3200 “C” bar feeder • Bar feeder year of manufacture: 2003 • Hinged belt chip conveyor • Chip conveyor discharge height: 950 mm • Guide tubes D25, D36 • Live workpiece stop, shank 16 × 16 mm • Brankamp CMS 100 collision monitoring Kedeza Ucxopfx Ai Njdp Technical Specification Through-spindle coolant: Yes Counter spindle: Yes Driven tools: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen M32-2M3 CNC dolgo stružnica Leto izdelave: 2002 Krmiljenje: Mitsubishi Meldas 635 Maks. premer obdelave: 32 mm 7 krmiljenih servo osi: X1/Z1/Y1/X2/Z2/X3/Z3 4 pogonska orodja na vertikalnem nosilcu C-os: glavno in proti vreteno Vključno z opremo: - FMB Turbo 5-42 podajalnik materiala - Odsesovalna naprava - Transportni trak za dele - 5 pogonskih orodij za revolver - 5 standardnih nosilcev (stružni/rezkalni) za revolver Kdedsx Dncfepfx Ai Nep - Takoj na voljo -

Stanje: dober (rabljeno), Leto izdelave: 2003, CNC Turning Automation TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit), 10.4" flat display Additional V24 RS232 port in control cabinet MDE interface in control cabinet (machine running, piece counter) Tool monitoring for threading without compensating chuck Main spindle: spindle bore 36 mm, max. speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Hainbuch quick-change base body with installation aid Hainbuch manual quick-change device Sub-spindle: Sub-spindle as motorized spindle with C-axis System for sub-spindle clamping pressure, part ejector, Axfix chuck Hainbuch Top tool turret with driven tools, electronic gearbox X3 cross slide for front attachment, 5-position front attachment Driven tools Face-side cut-off machining station with driven tools Workpiece removal unit: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Cooling/lubrication system: Tank 230 l / 7 bar / 50 l/min Internal coolant supply 30 bar High pressure 120 bar at front and rear machining station Vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Rinsing gun Hinged belt chip conveyor, discharge height 950 mm Preparation for mounting bar loader (guide tube D25, D36) Steady rest stop (shank 16x16) Collision monitoring Brankamp CMS 100 on main and sub-spindle Machine with no known defects, Kdedszaud Aepfx Ai Nep

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Tool monitoring, thread cutting without compensation chuck, main spindle: spindle bore: 36mm, max. speed: 6300 rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch interchangeable parts, installation aid for base body, manual Hainbuch change device, sub-spindle: sub-spindle as motor spindle, C-axis, device for counter pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool turret, driven tools, electronic gearbox, X3 cross-slide for front unit, front unit 5-station and parting-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece removal device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel), rinse gun, connected load: 33kW, control: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in control cabinet, operating hours: 124,705h, with bar loader FMB TURBO 5-42XT/3200/C, chip conveyor, coolant system, and basic set of stationary and driven tool holders. On-site inspection possible. Kdedpfx Asy U Nq Iei Nsp

Stanje: dober (rabljeno), Deli, ki so prikazane v roki, niso vključeni. Tehnične podrobnosti so prikazane na sliki. Kdedpfx Aewb Eptsi Nsp Orodja v leseni škatli so priložena stroju.

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 18.538 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 431, skupna masa: 7.000 kg, skupna širina: 2.000 mm, skupna dolžina: 11.000 mm, skupna višina: 1.900 mm, proizvajalec krmilnikov: TRAUB, model krmilnika: SYSTEM TX 8i, TRAUB TNK 36 CNC Turning Machine - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tool stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Measuring system resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front tool unit: - Number of tool stations: 5 - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Measuring system resolution X/Z: 0.0005/0.001 mm Rear tool unit: - Number of tool stations: 5 Kdsdpfjyh Ivlsx Ai Nep - Diameter: 40 mm - Pitch: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Measuring system resolution X/Z: 0.0005/0.001 mm - Including the clamping tool holders shown in the photos, as well as a chip conveyor and a coolant system from manufacturer Resy, and a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be picked up on a binding date to be agreed between 01.04. and 02.04.2026. FCA D-97944 Boxberg – loaded onto truck

Stanje: rabljeno, Leto izdelave: 2005, Premer struženja 5-42 mm Dolžina struženja 3200 mm Krmiljenje Traub TX8i Kdedpfx Aijy Nd U Do Njp X-os 50 mm Z-os 50 mm Teža stroja pribl. 4000 kg 21817 ur

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 210 [mm] Kdedpfx Aisuha Nwj Nop - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of stations: 8 - Number of live/tool-driven stations: 3 - Driven tool speed: 8,000 [rpm] TOOL HOLDER 2 - Number of stations: 5 - Number of live/tool-driven stations: 2 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of stations: 5 BACKWORKING - Number of stations: 4 - Number of live/tool-driven stations: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Spindle hours: 18,849 [h] EQUIPMENT - CNC control: Fanuc 31i-Model A - Live tool drive on: S11, S21, S51 - Driven guide bushing - Parts removal unit - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 20 [bar] - Bar feeder: TORNOS SBF320 - Electrical transformer - Number of live toolholders: 5 - Double drilling/milling toolholder: 1